Customs tariff code 8479.90.15: Parts of machines of subheading 8479 89 70
Reference data as at 1 July 2026
Customs tariff code 8479.90.15 covers Parts of machines of subheading 8479 89 70. The third-country duty rate is 0 %, plus import VAT.
8479.90.15 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8479.90.15
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
From HS code to customs tariff code 8479.90.15
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B005Equipment specially designed for the deposition, processing and in-process control of inorganic overlays, coatings and surface modifications, as follows, for substrates specified in column 2, by processes shown in column 1 in the Table following 2E003.f., and specially designed automated handling, positioning, manipulation and control components therefor:
- 2B207"Robots", "end-effectors" and control units, other than those specified in 2B007, as follows:
- 2B350bChemical manufacturing facilities, equipment and components, as follows:
- 2B352aBiological manufacturing and handling equipment, as follows:
- 3B001eEquipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Komponentmagasin till pick and place-maskin. Varan används för laddning av en maskin som plockar och placerar ut elektroniska komponenter på kretskort. Magasinet innehåller upp till 16 olika matare för 8 mm komponentband. Pick and place-maskinen fungerar inte utan magasin. Magasinet är specifikt utformat för att passa företagets pick and place-maskiner.
Sauger (sog. nozzle) - aus einem spezifisch geformten Grundkörper aus Metall mit durchgehendem Luftansaugkanal und Befestigungsansatz, federgelagertem Ansaugstift und hutförmiger Kunststoffhülse (Abbildung siehe Anlage), - zum Ansaugen von Elektrobauteilen im Rahmen des Leiterplatten-Bestückungsprozesses, - zum Einbau in einen Leiterplatten-Bestückungsautomaten, - lieferbar in verschiedenen Ausführungen für unterschiedliche Bauteilarten. "Teil, erkennbar ausschließlich für Maschine mit eigener Funktion, in Kapitel 84 anderweit weder genannt noch inbegriffen, für elektronischen Bestückungsautomaten der Unterposition 8479 8970 - sog. Sauger"
Sog. mobile Aufspannvorrichtung für elektrische Bauteilförderer, - in Form eines fahrbaren Einbaurahmens aus Stahl, mit spezifischen Vorrichtungen zur Aufnahme und Fixierung von bis zu vierzig Bauteilezuführern, Einpassvorrichtungen zu Montagezwecken, Anschlüssen zur elektrischen Kontaktierung und pneumatischen Ansteuerung (Abbildung siehe Anlage), - erkennbar zum Einbau in einen elektrischen Bestückungsautomat bestimmt, - nach Bestückung mit den Bauteilezuführern zur Ermöglichung der bedarfsgerechten Zufuhr der für den Bestückungsvorgang benötigten Bauteile. "Teil, erkennbar ausschließlich für ein mechanisches Gerät mit eigener Funktion, in Kapitel 84 anderweit weder genannt noch inbegriffen bestimmt, für elektronischen Bestückungsautomaten der Unterposition 8479 8970 - sog. mobile Aufspannvorrichtung für elektrische Bauteilförderer"
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 1400/2001 der Kommission vom 10. Juli 2001 1) (RV L 1400/01), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1): Flüssigseifenspender in Form eines Behälters aus unedlem Metall, auf dem eine mittels Druckknopfs zu betätigende Kolbenpumpe angebracht ist, die aus einer Kolbenfeder, einem Verschlusskolben, einem Bügel und einem Kolbenrohr besteht. Siehe Fotografie 2) Unterposition 8479 89 97 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie dem Wortlaut der KN - Codes 8479, 8479 89 und 8479 89 97. Verordnung (EU) Nr. 315/2011 der Kommission vom 30. März 2011 (ABl. EU Nr. L 86/59) (RV L 315/11): Elektromechanische Maschine (sog. …
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgerichts Hamburg vom 20. Oktober 2016, Az: 4 K 20/15: Einreihung von SCARA-Industrierobotern Leitsatz 1. Erläuterungen zum Harmonisierten System sind ausschließlich in den Vertragssprachen Englisch und Französisch authentisch. 2. SCARA-Industrieroboter, an die verschiedene Werkzeuge oder Greifer montiert werden können, so dass die Roboter andere Funktionen als das Heben, Beladen, Entladen oder Fördern im Sinne der Position 8428 KN ausführen können, sind als Industrieroboter, anderweit weder genannt noch inbegriffen, in die Unterposition 8479 50 00 KN einzureihen. Gerichtliche Entscheidungen (GE)
Zu Position 8479 gehören jedoch stets Maschinen, die aus beliebigen Stoffen Bindfäden, Seile, Taue oder Kabel herstellen (z. B. Litzenschlagmaschinen, Seilschlagmaschinen und Kabelmaschinen) (RV E8408200). 9. Im Sinne der Position 8470 gilt der Begriff „im Taschenformat“ nur für Geräte, deren Abmessungen 170 mm x 100 mm x 45 mm nicht übersteigen (RV E8409000). 10. Im Sinne der Position 8485 bezeichnet der Begriff „additive Fertigung“ (auch als 3D-Druck bezeichnet) den Aufbau physischer Gegenstände anhand eines digitalen Modells durch schichtweises Auftragen sowie Härtung und Verfestigung eines Werkstoffs (z. B. von Metall, Kunststoffen oder Keramik) (RV E8410100). …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8479.90.15 cover?
Code 8479.90.15 covers Parts of machines of subheading 8479 89 70. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8479.90.15?
The third-country duty rate for 8479.90.15 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8479.90.15?
The first six digits form the HS code: 847990. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8479.90.15 have?
8479.90.15 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8479.90.15 sit in the tariff?
8479.90.15 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8479 Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter > 847990 Parts. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8479.90.15?
Yes. The EBTI database holds decisions on 8479.90.15, for example SEBTITV-2020-05849. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8479.90.15 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8479.90.15 to 2B005, 2B207, 2B350b, 2B352a, 3B001e. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8479.90.15 change?
8479.90.15 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.