Customs tariff code 8481.30.91.99: Other
Reference data as at 1 July 2026
Customs tariff code 8481.30.91.99 covers Other. The third-country duty rate is 2.2 %, plus import VAT.
8481.30.91.99 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8481.30.91.99
- Third-country duty
- 2.2 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8481Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
- 8481.30Check (non-return) valves
- 8481.30.91Of cast iron or of steel
- 8481.30.91.99Other
From HS code to customs tariff code 8481.30.91.99
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B001bPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 2B350gChemical manufacturing facilities, equipment and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Le clapet anti-retour constitué en acier se présentant sous la forme d’une pièce mécanique pour circuits de lubrification de moteurs thermiques. Il permet de s'opposer au passage d'un fluide dans un conduit. Son ouverture s'effectue sous l'effet de la pression du fluide dans le conduit. Le clapet anti-retour empêche la circulation du fluide dans un sens. Il supporte une pression d’ouverture maximale de 1000 kPa.
Zawór zwrotny klapowy lub grzybkowy jednokierunkowy. Przeznaczony do zabezpieczenia elementów instalacji przed wstecznym przepływem medium. Montowany w instalacjach przemysłowych i rurociągach ogólnego przeznaczenia. Służy do odcinania przepływu medium, np. wody przemysłowej, pary wodnej, powietrza, oleju, paliw, wody kopalnianej, nieagresywnych chemicznie i nietoksycznych płynów, gazu koksowniczego oraz ścieków poflotacyjnych. Zamknięcie zaworu przed wstecznym przepływem następuje samoczynnie, w zależności od typu zaworu za pomocą sprężyny, siły grawitacji i ciśnienia wstecznego. Zgodnie z dokumentacją, element uszczelniający w postaci klapy/grzybka wykonany z żeliwa lub stali. Korpus wykonany z żeliwa lub staliwa, posiada kołnierze montażowe. W zależności od otworu przepływu występują zawory: od DN50 do DN2000. Ciśnienie nominalne medium dla zaworów: PN2,5bar, PN6bar, PN10bar, PN16bar, PN25bar, PN63bar, PN100bar, PN160bar. Towar pakowany w spaletyzowane skrzynie ze sklejki, pojedynczo lub zbiorczo.
Coupleur femelle à clapet de retenue en acier inoxydable. Il s’agit d’une pièce servant à réaliser un raccordement pneumatique « rapide ». Le raccord est monté sur roulement à billes. Une bague se déplace pour permettre à la partie mâle de rentrer dans la femelle et de se bloquer en position une fois que la bague se referme. Ce coupleur est équipé d’un clapet anti-retour pour empêcher le reflux de produit lors de la connexion.
Clapet en acier revêtu de zinc, avec en son centre un joint FKM (fluorocarbonne) pour l'électrovanne de canister. Il a une fonction d'étanchéité et de régulation de l'envoi de carburant vers le moteur d'un véhicule automobile.
Rückschlagventil (Abbildung siehe Anlage) - in Form einer Winkel-Kupplung mit Rückschlagventil aus Stahl, mit Verdrehschutz und aufgesetzten Entlüftergummis, - Bestandteil eines Wartungssets für Bremsleitungen (nicht Gegenstand dieser vZTA), - zu Begrenzung des Fluidstroms (Bremsflüssigkeit) in eine Richtung, damit die alte Bremsflüssigkeit bei der Wartung nicht zurück in das System läuft. "Armatur und ähnliche Apparate für Rohr- oder Schlauchleitungen, Rückschlagventil, aus Stahl, keine Ware der TARIC-Codes 8481 3091 30 bis 8481 3091 91 - Rückschlagventil"
Een ontluchter met -volgens opgave- onder andere de volgende kenmerken en eigenschappen: - voor het ontluchten van de achterasbehuizing; - een cilindervormige behuizing vervaardigd van voornamelijk onedel metaal van staal; - met aan een eind een uitstekende aansluiting en aan de andere zijde een interne aansluiting voor lucht; - voorzien van een terugslagklep, die zorgt dat de lucht maar in één richting door de ontluchter kan; - op de uitstekende aansluiting is een moervormig element aangebracht.
Clapet antiretour, destiné à la fabrication de moteurs diesel. Le corps métallique est en JDM A0 12L14 (acier carbone) avec un taux de plomb entre 0.15 et 0.35%. Il y a en surface un revêtement anticorrosion de zinc avec une épaisseur de 5 à 15µm. Le clapet comprend sur le dessus un joint torique en élastomère.
Tochtkleppen ter voorkoming van het omkeren van de luchtstroom in ronde ventilatiebuizen. Ze functioneren door middel van twee halfronde lamellen die in de behuizing zijn gemonteerd en scharnieren op een centrale spil. Ze worden aan tegengehouden door een ring uit schuimrubber, zodat ze maar in één richting kunnen scharnieren. De schuimrubberen afdichting zorgt ook voor een betere afsluiting en geluidsreductie. De kleppen openen bij overdruk en sluiten wanneer de druk daalt. Ze zijn aanbevolen voor installatie in horizontale (ventilatie)buizen. De behuizing bestaat uit gegalvaniseerd staal, de lamellen uit aluminium. De diameter varieert tussen 100 en 400 mm, naargelang het model.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Armaturen und ähnliche Apparate sind Organe, die an Rohr- oder Schlauchleitungen oder Behältern angebracht werden, um den Durch-, Zu- oder Abfluss von strömenden Medien (Flüssigkeiten, Gasen, Dämpfen, dickflüssigen Stoffen) zu regeln. Manchmal, jedoch seltener, werden sie auch für den Durchfluss von festen pulverförmigen Stoffen, wie z. B. Sand, verwendet. Zu dieser Position gehören auch derartige Vorrichtungen, die zum Regeln des Druckes oder der Fließ- oder Strömungsgeschwindigkeit von Flüssigkeiten oder Gasen bestimmt sind. Diese Organe regulieren den Durch-, Zu- oder Abfluss mit Hilfe eines Verschlusses (Drehküken, Kegeln, Klappe, Kugel, Nagel, Schieber, Membran usw.), der je nach seiner Stellung einen Durchgang öffnet oder verschließt. In der Regel werden sie entweder von Hand betätigt, z. B. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EU) Nr. 1067/2010 der Kommission vom 19. November 2010 (ABl. EU Nr. L 304/11) (RV L 1067/11): 1. Eine Ware zum Verteilen von Wasser durch eine Düse (sog. Duschkopf), aus Kunststoff gefertigt und mit Nickel beschichtet. Die Ware ist mit einem Rückschlagventil ausgestattet, das einen Rückfluss des Wassers verhindert. Das Ventil dient jedoch nicht zur Regulierung des Wasserflusses. Der Durchfluss durch die Düse wird durch den Wasserhahn reguliert, an den die Ware über einen Schlauch anzuschließen ist. Unterposition 3924 90 00 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 3924 und 3924 90 00. …
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgerichts Hamburg vom 25. April 2024, AZ: 4 K 72/21: Warenbeschreibung: Die Komplettduschkabine, die zum Zeitpunkt der Einfuhr in Teile zerlegt ist, stellt sich wie folgt dar: Abmessungen: 85 x 85 x 195 cm groß und besteht aus - einer Duschtasse aus Kunststoff (Acryl) - Profilen aus Aluminium - Rückwänden aus Sicherheitsglas - zwei teilweise mit Aluminiumprofilen versehenen Seitenteilen aus Sicherheitsglas - einer Ablagefläche aus Glas - einer einfachen, nicht strahlverstellbaren Handbrause - einem flexiblen Brauseschlauch aus unedlem Metall - einem Einhebel-Brausemischer Entscheidungsgründe: Die im Einfuhrzeitpunkt noch nicht zusammengesetzt gestellte Komplettduschkabine wird gemäß AV 2 a) Satz 2 wie eine bereits zusammengesetzte Komplettduschkabine eingereiht. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 202. Sitzung des Ausschusses für den Zollkodex vom 07. bis 09. Oktober 2019: Warenbeschreibung: Bei der Ware handelt es sich um einen metallverstärkten Schlauch aus Kunststoff, in verschiedenen Längen, der auf eine Trommel mit manueller oder automatischer Aufrollfunktion gewickelt ist. An einem Ende des Schlauchs befindet sich eine Sprühdüse mit einem Mechanismus zur Einstellung des Wasserstrahls. Der Schlauch sorgt für den Transport des Wassers von einem Entnahmepunkt zu dem Ort, an dem das Wasser benötigt wird. Die Trommel und die Sprühdüse dienen der bequemeren Verwendung des Schlauchs. Die Ware wird an einem Wasserhahn angeschlossen und dient z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8481.30.91.99 cover?
Code 8481.30.91.99 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8481.30.91.99?
The third-country duty rate for 8481.30.91.99 is 2.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8481.30.91.99?
The first six digits form the HS code: 848130. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8481.30.91.99 have?
8481.30.91.99 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8481.30.91.99 sit in the tariff?
8481.30.91.99 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8481 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves > 848130 Check (non-return) valves > 84813091 Of cast iron or of steel. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8481.30.91.99?
Yes. The EBTI database holds decisions on 8481.30.91.99, for example FRBTIFR-BTI-2026-03815. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8481.30.91.99 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8481.30.91.99 to 0B001b, 2B350g. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8481.30.91.99 change?
8481.30.91.99 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.