Customs tariff code 8481.80.59.80.0: Magnetventil für Ölpumpen von Verbrennungsmotoren zur Regelung der Ölmenge in der…
Reference data as at 1 July 2026
Customs tariff code 8481.80.59.80.0 covers Magnetventil für Ölpumpen von Verbrennungsmotoren zur Regelung der Ölmenge in der Pumpe, mit einem Kabel mit einer Länge von 550 mm oder mehr, jedoch nicht mehr als 700 mm, mit elektrischem Steckverbinder,, mit einem Betriebsdruck von nicht mehr als 5,5 bar,, mit einer Betriebsspannung von 9 VDC oder mehr, jedoch nicht mehr als 16 VDC,, mit einer Ventilbasisbreite von 22 mm oder mehr, jedoch nicht mehr als 27 mm,, mit einer Ventillänge von 55 mm oder mehr, jedoch nicht mehr als 110 mm, zur Verwendung bei der Herstellung von Kraftfahrzeugmotoren. The third-country duty rate is 2.2 %, plus import VAT.
8481.80.59.80.0 is national commodity code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8481.80.59.80.0
- Third-country duty
- 2.2 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8481Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
- 8481.80Other appliances
- 8481.80.59Other
- 8481.80.59.80Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines
- 8481.80.59.80.0Magnetventil für Ölpumpen von Verbrennungsmotoren zur Regelung der Ölmenge in der Pumpe, mit einem Kabel mit einer Länge von 550 mm oder mehr, jedoch nicht mehr als 700 mm, mit elektrischem Steckverbinder,, mit einem Betriebsdruck von nicht mehr als 5,5 bar,, mit einer Betriebsspannung von 9 VDC oder mehr, jedoch nicht mehr als 16 VDC,, mit einer Ventilbasisbreite von 22 mm oder mehr, jedoch nicht mehr als 27 mm,, mit einer Ventillänge von 55 mm oder mehr, jedoch nicht mehr als 110 mm, zur Verwendung bei der Herstellung von Kraftfahrzeugmotoren
From HS code to customs tariff code 8481.80.59.80.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B001bPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B001cPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B001dPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 2A226Valves having all of the following characteristics:
- 2B350gChemical manufacturing facilities, equipment and components, as follows:
- 0B001Plant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Unterposition 8481 80: 1. Ölregulierungsvorrichtungen zum Konstanthalten des Ölzuflusses bei Ölbrennern. Sie funktionieren durch das Zusammenwirken eines selbsttätigen Schwimmerventils mit einer handbetätigten Zuflussreguliervorrichtung. 2. Pneumatisch zu betätigende Ventile zum Regeln des Durchflusses von verschiedenen Flüssigkeiten oder Gasen. Bei diesen Ventilen wird die Ventilkegelstellung durch den auf eine Membrane einwirkenden Luftdruck bestimmt, dem ein auf die Membrane ausgeübter Federdruck entgegenwirkt. Derartige Ventile können auch mit einer Stellvorrichtung ausgestattet sein. 3. Ventil ohne Druckkopf, das sich aus folgenden Bestandteilen zusammensetzt: 1. einem Deckel aus unedlem Metall 2. einer Deckeldichtung aus Kunststoff 3. einer Innendichtung aus Kunststoff 4. einer Schließvorrichtung aus Kunststoff 5. einem Gehäuse aus Kunststoff 6. einer Stahlfeder 7. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EU) Nr. 1067/2010 der Kommission vom 19. November 2010 (ABl. EU Nr. L 304/11) (RV L 1067/11): 1. Eine Ware zum Verteilen von Wasser durch eine Düse (sog. Duschkopf), aus Kunststoff gefertigt und mit Nickel beschichtet. Die Ware ist mit einem Rückschlagventil ausgestattet, das einen Rückfluss des Wassers verhindert. Das Ventil dient jedoch nicht zur Regulierung des Wasserflusses. Der Durchfluss durch die Düse wird durch den Wasserhahn reguliert, an den die Ware über einen Schlauch anzuschließen ist. Unterposition 3924 90 00 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 3924 und 3924 90 00. …
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgerichts Hamburg vom 25. April 2024, AZ: 4 K 72/21: Warenbeschreibung: Die Komplettduschkabine, die zum Zeitpunkt der Einfuhr in Teile zerlegt ist, stellt sich wie folgt dar: Abmessungen: 85 x 85 x 195 cm groß und besteht aus - einer Duschtasse aus Kunststoff (Acryl) - Profilen aus Aluminium - Rückwänden aus Sicherheitsglas - zwei teilweise mit Aluminiumprofilen versehenen Seitenteilen aus Sicherheitsglas - einer Ablagefläche aus Glas - einer einfachen, nicht strahlverstellbaren Handbrause - einem flexiblen Brauseschlauch aus unedlem Metall - einem Einhebel-Brausemischer Entscheidungsgründe: Die im Einfuhrzeitpunkt noch nicht zusammengesetzt gestellte Komplettduschkabine wird gemäß AV 2 a) Satz 2 wie eine bereits zusammengesetzte Komplettduschkabine eingereiht. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 202. Sitzung des Ausschusses für den Zollkodex vom 07. bis 09. Oktober 2019: Warenbeschreibung: Bei der Ware handelt es sich um einen metallverstärkten Schlauch aus Kunststoff, in verschiedenen Längen, der auf eine Trommel mit manueller oder automatischer Aufrollfunktion gewickelt ist. An einem Ende des Schlauchs befindet sich eine Sprühdüse mit einem Mechanismus zur Einstellung des Wasserstrahls. Der Schlauch sorgt für den Transport des Wassers von einem Entnahmepunkt zu dem Ort, an dem das Wasser benötigt wird. Die Trommel und die Sprühdüse dienen der bequemeren Verwendung des Schlauchs. Die Ware wird an einem Wasserhahn angeschlossen und dient z. B. …
Frequently asked questions
What does customs tariff code 8481.80.59.80.0 cover?
Code 8481.80.59.80.0 covers Magnetventil für Ölpumpen von Verbrennungsmotoren zur Regelung der Ölmenge in der Pumpe, mit einem Kabel mit einer Länge von 550 mm oder mehr, jedoch nicht mehr als 700 mm, mit elektrischem Steckverbinder,, mit einem Betriebsdruck von nicht mehr als 5,5 bar,, mit einer Betriebsspannung von 9 VDC oder mehr, jedoch nicht mehr als 16 VDC,, mit einer Ventilbasisbreite von 22 mm oder mehr, jedoch nicht mehr als 27 mm,, mit einer Ventillänge von 55 mm oder mehr, jedoch nicht mehr als 110 mm, zur Verwendung bei der Herstellung von Kraftfahrzeugmotoren. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8481.80.59.80.0?
The third-country duty rate for 8481.80.59.80.0 is 2.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8481.80.59.80.0?
The first six digits form the HS code: 848180. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8481.80.59.80.0 have?
8481.80.59.80.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 8481.80.59.80.0 sit in the tariff?
8481.80.59.80.0 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8481 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves > 848180 Other appliances > 84818059 Other > 8481805980 Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8481.80.59.80.0?
The EBTI database currently holds no valid decisions on 8481.80.59.80.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8481.80.59.80.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8481.80.59.80.0 to 0B001b, 0B001c, 0B001d, 2A226, 2B350g, 0B001. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8481.80.59.80.0 change?
8481.80.59.80.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.