Customs tariff code 8482.91.90.10: Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70…
Reference data as at 1 July 2026
Customs tariff code 8482.91.90.10 covers Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, - made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), - with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry. The third-country duty rate is 7.7 %, plus import VAT.
8482.91.90.10 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8482.91.90.10
- Third-country duty
- 7.7 %
- Declarable
- No
- Binding rulings
- 0
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8482Ball or roller bearings
- 8482.91Balls, needles and rollers
- 8482.91.90Other
- 8482.91.90.10Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, - made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), - with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry
From HS code to customs tariff code 8482.91.90.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B001bPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 2A001aAnti-friction bearings, bearing systems and components, as follows:
- 0B001Plant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 2A001Anti-friction bearings, bearing systems and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 1141/2008 der Kommission vom 13. November 2008 (ABl. EU Nr. L 308/9 vom 19. November 2008): Lineares Bewegungssystem bestehend aus einer Gleitvorrichtung mit zwei Führungsschienen und einem rechteckigen Gehäuse für Kugeln. Das Gehäuse wird durch die Kugeln in den Führungsschienen der Gleitvorrichtung bewegt. Das lineare Bewegungssystem wird in verschiedenen Arten von Maschinen verwendet, beispielsweise Güterumschlaganlagen, Werkzeugmaschinen oder DVD-Spielern. Unterposition 8482 10 90 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2 a) zu Abschnitt XVI sowie dem Wortlaut der KN-Codes 8482, 8482 10 und 8482 10 90. …
Gerichtliche Entscheidungen (GE) - national Einreihung von Profilschienenführungen in die Kombinierte Nomenklatur 1. Urteil des Finanzgerichts München vom 25. April 2001 3 K 5434/99 2. BFH- Beschluss vom 11. April 2002 VIl B 134/01 Der Begriff 'Wälzlager' in der Positionsüberschrift 8482 KN erfasst Kugellager aller Art, und zwar ohne Rücksicht darauf, ob die Gleitvorrichtungen, wie herkömmlich, konzentrisch oder linear angeordnet sind. Denn der Umstand, dass die Führung ‑ wie bei der Profilschienenführung im Streitfall ‑ linear statt wie herkömmlich konzentrisch angeordnet ist und damit die Fortbewegung linear und nicht kreisförmig verläuft, ist kein im Wortlaut der Tarifposition zum Ausdruck gelangtes Einreihungskriterium. Dies wird durch die Erläuterungen bestätigt, wonach Wälzlager eben nur „in der Regel“ aus zwei konzentrischen Ringen (Laufringen) usw. …
Zu Position 8482 gehören nur solche polierten Stahlkugeln, deren Grenzabmaß nicht mehr als ± 1 v. H. vom angegebenen Durchmesser (Nennmaß), höchstens jedoch ± 0,05 mm beträgt (RV E8407100). Stahlkugeln, die dieser Begriffsbestimmung nicht entsprechen, gehören zu Position 7326 (RV E8407200). 8. Maschinen mit vielseitiger Verwendungsmöglichkeit gehören, wenn nichts anderes bestimmt ist und vorbehaltlich der Anmerkung 2 zu Kapitel 84 und der Anmerkung 3 zu Abschnitt XVI, zu der Position, die ihrem Hauptverwendungszweck entspricht. Besteht eine derartige Position nicht oder ist der Hauptverwendungszweck nicht feststellbar, sind sie der Position 8479 zuzuweisen (RV E8408100).
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8482.91.90.10 cover?
Code 8482.91.90.10 covers Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, - made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), - with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8482.91.90.10?
The third-country duty rate for 8482.91.90.10 is 7.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8482.91.90.10?
The first six digits form the HS code: 848291. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8482.91.90.10 have?
8482.91.90.10 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8482.91.90.10 sit in the tariff?
8482.91.90.10 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8482 Ball or roller bearings > 848291 Balls, needles and rollers > 84829190 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8482.91.90.10?
The EBTI database currently holds no valid decisions on 8482.91.90.10. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8482.91.90.10 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8482.91.90.10 to 0B001b, 2A001a, 0B001, 2A001. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8482.91.90.10 change?
8482.91.90.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.