Customs tariff code 8483.40.29: Zahnradgetriebe (ausgenommen Schaltgetriebe), andere
Reference data as at 1 July 2026
Customs tariff code 8483.40.29 covers Zahnradgetriebe (ausgenommen Schaltgetriebe), andere. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
8483.40.29 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8483.40.29
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8483Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
- 8483.40Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters
- 8483.40.29Zahnradgetriebe (ausgenommen Schaltgetriebe), andere
From HS code to customs tariff code 8483.40.29
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 8A002oMarine systems, equipment and components, as follows:
- 8A002oMarine systems, equipment and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Planetengetriebe, - im Wesentlichen bestehend aus mehreren Planetenstufen, Wellen, Lagern und Bremse in einem Metallgehäuse (Abbildung siehe Anlage) - zur Übersetzung des Drehmoments zwischen dem hydrostatischen Fahrantrieb (Hydromotor; nicht Gegenstand dieser vZTA) und dem Fahrwerk - zur Verwendung vornehmlich in mobilen Arbeitsmaschinen (z.B. in Raupenfahrzeugen) bestimmt "Getriebe, Zahnradgetriebe, kein Schaltgetriebe, Planetengetriebe"
Planetengetriebe, - im Wesentlichen bestehend aus einer Kombination aus Planeten- und Stirnradstufen, Wellen, Lagern, Filter, Ventil, Drucksensor, Schläuchen und Dichtungen in einem Metallgehäuse - zur Kraftübertragung und Übersetzung des Drehmoments, vornehmlich in Windkraftanlagen bestimmt "Getriebe, Zahnradgetriebe, kein Schaltgetriebe, Planetengetriebe"
Zahnradgetriebe (sog. Ritzelgetriebe), sog. Schwenktrieb SP-I, Foto siehe Anlage, laut Antrag im Wesentlichen bestehend aus - einem geschlossenen, selbsttragenden Gehäuse aus unedlem Metall, - einem Antriebsritzel und einer außenverzahnten Kugeldrehverbindung für hohe Tragfähigkeit, - einem Schmiernippel für den Zahneingriff, - Schraubverbindungen zur Anschlusskonstruktion, - optional mit Elektro- bzw. Hydraulikmotor (nicht Gegenstand der vZTA), - wird u. a. in Baumaschinen eingesetzt und dient zur gleichzeitigen Aufnahme von Axial- und Radialkräften sowie von Kippmomenten. "Zahnradgetriebe, kein Schaltgetriebe, nicht von den Unterpositionen (HS) 8483 4021 bis 8483 4025 erfasst"
Drehmomentwandler, sog. Drehmomentvervielfältiger, Foto siehe Anlage, - Warenzusammenstellung, zur Befriedigung eines speziellen Bedarfs zusammengestellt und in Aufmachung für den Einzelverkauf, im Wesentlichen bestehend aus -- einem Drehmomentwandler (charakterbestimmend) mit einem Planetengetriebe und einer Abstützung - in verschiedenen Ausführungen mit unterschiedlichen Untersetzungen für verschiedene Drehmomente -, -- einem Ersatz-Scherstift als Überlastsicherung und einem Winkelschraubendreher zum Austausch des Ersatz-Scherstifts; der Drehmomentwandler wird zwischen einen Dreh- momentschlüssel und einen auswechselbaren Steckschlüsselsatz (beide nicht Gegenstand dieses vZTA-Antrags) gesteckt und dient dort zur Kraftverstärkung des am Drehmoment- schlüssel eingestellten Drehmoments. "Zahnradgetriebe, kein Schaltgetriebe (Drehmomentwandler), Planetengetriebe"
Zahnradgetriebe (sog. Ritzelgetriebe), sog. Schwenktrieb SP-I, Foto siehe Anlage, laut Antrag im Wesentlichen bestehend aus - einem geschlossenen, selbsttragenden Gehäuse aus unedlem Metall, - einer außenverzahnten Kugeldrehverbindung für hohe Tragfähigkeit, - einem Schmiernippel für den Zahneingriff, - Schraubverbindungen zur Anschlusskonstruktion, - wird u. a. in Baumaschinen eingesetzt und dient zur gleichzeitigen Aufnahme von Axial- und Radialkräften sowie von Kippmomenten. "Zahnradgetriebe, kein Schaltgetriebe, nicht von den Unterpositionen (HS) 8483 4021 bis 8483 4025 erfasst"
Mechanizm służący do dokręcania/zwiększania momentu obrotowego w połączeniach gwintowych. Może być łączony z wyświetlaczem LCD, który służy jedynie do odczytu danych (nie steruje urządzeniem). Obsługa jest ręczna, dzięki zastosowaniu urządzenia otrzymuje się określone momenty i kąty dokręcenia. Posiada moment obrotowy o zakresie do 60000 IN/LBS. W trakcie pracy następuje zmiana momentu obrotowego (siły) pomiędzy wejściem a wyjściem. Wzmocnienie momentu obrotowego następuje przez zastosowanie w urządzeniu przekładni planetarnej. W skład urządzenia wchodzi - wzmacniacz momentu obrotowego, wyświetlacz LCD, ładowarka, klucz. Zasadniczy charakter wyrobowi nadaje przekładnia planetarna. Zgodnie z oświadczeniem wnioskodawcy wyrób pakowany w skrzynię transportową.
Bei der als "Handkraftschrauber HG" bezeichneten Ware handelt es sich um einen Drehmomentwandler, der mit einem Planetengetriebe ausgestattet ist. Das Erzeugnis wird zwischen einen Drehmomentschlüssel und einen auswechselbaren Steckschlüsselsatz gesteckt und dient dort zur Kraftverstärkung des am Drehmomentschlüssel eingestellten Drehmoments. Er kommt in unterschiedlichen Untersetzungen für verschiedene Drehmomente vor. Die Ware ist als "Zahnradgetriebe, kein Schaltgetriebe (Drehmomentwandler), Planetengetriebe" einzureihen.
Dle deklarovaných údajů se jedná o pohybové šrouby o délce od 73,5 mm do 162 mm, s hlavou se šestihranným otvorem, se závitem M8, z nerez oceli. Pohybové šrouby slouží k převodu rotačního pohybu vytvořeného elektrickým motorem, na pohyb lineární. Používají se v BSA anténě k nastavení antény. Fungují tak, že motor pohybuje (otáčí) šroubem, kdy na závitu je upevněna standardní matice zasazená do plastového unašeče a otáčením šroubu dochází k posunu plastového unašeče, který je spojen s posuvným jádrem antény.
Notes that govern this classification
Zu Unterposition 8483 40: 1. Kugel- oder Rollen-Drehverbindungen (für Unterwagen von Kranen, Baggern usw., zum Befestigen und Drehen des schwenkbaren Überwagens). Sie bestehen aus 1) einem oder mehreren metallenen Kränzen (mit eingebauten Kugel- oder Rollenlagern), die auf dem feststehenden Teil (Unterwagen) der Maschine befestigt werden, für die sie bestimmt sind, sowie 2) aus einem metallenen Zahnkranz zum Tragen und Drehen des schwenkbaren Teils (Oberwagen) dieser Maschine. Die Drehbewegung wird vom Motor auf den Zahnkranz übertragen.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 1452/2007 der Kommission vom 7. Dezember 2007 (ABL EU Nr. L 325, Seite 66) (RV L1452/2007): 1. Ein Kugeldrehkranz, bestehend aus zwei konzentrischen Schmiedestahlringen, von denen einer mit einer Verzahnung versehen ist. Die Ringe sind drehbar, da sie durch Reihen von Stahlkugellagern getrennt sind. Durch die Verzahnung entsteht eine Drehmomentübertragung. Die Ware ist zum Einbau in einen Bagger bestimmt. Unterposition 8483 90 89 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2 a zum Abschnitt XVI und dem Wortlaut der KN-Codes 8483, 8483 90 und 8483 90 89. …
Nationale Entscheidungen und Hinweise (NEH) Internationale Entscheidungen und Hinweise (IEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 250. Sitzung des Ausschusses für den Zollkodex vom 4. bis 6. Dezember 2023: Warenbeschreibung: Antriebsrad einer Raupen-Erdbewegungsmaschine Es handelt sich um eine Ware in Form eines Zahnrads aus Stahl, das so ausgelegt ist, dass es in eine Raupenkette greift, um als Antriebsrad einer Erdbewegungsmaschine zu dienen. Das Antriebsrad stellt das Bewegungselement der Raupenkette dar. Das Kettenrad ist über ringförmig angebrachte Bolzen mit der Antriebswelle verbunden. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
- 8483.40.29.10For use in civil aircraft
- 8483.40.29.50Gear set of cycloid gear type with: - a rated torque of 50 Nm or more but not more than 9 000 Nm, - standard ratios of 1:50 or more but not more than 1:475, - lost motion of not more than one arc minute, - an efficiency of more than 80 % of a kind used in robot arms
- 8483.40.29.60Epicyclic gearing, of a kind used in driving hand-held power tools with: - a rated torque of 25 Nm or more, but not more than 70 Nm, - standard gear ratios of 1:12.7 or more, but not more than 1:65.3
- 8483.40.29.70Cast steel planetary cage, with: -external or internal toothing in a diametral pitch standard, -27 teeth or more, but not more than 70 teeth, -a diameter of 300 mm or more, but not more than 725 mm, -a length of 225 mm or more, but not more than 800 mm, -3 or 4 planetary gears, -a hardness of 40 HRC or more, but not more than 45 HRC
- 8483.40.29.89Other
Frequently asked questions
What does customs tariff code 8483.40.29 cover?
Code 8483.40.29 covers Zahnradgetriebe (ausgenommen Schaltgetriebe), andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8483.40.29?
TARIC holds no third-country rate of its own for 8483.40.29. The rate follows from the declarable commodity code beneath it.
What is the HS code for 8483.40.29?
The first six digits form the HS code: 848340. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8483.40.29 have?
8483.40.29 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8483.40.29 sit in the tariff?
8483.40.29 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8483 Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) > 848340 Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8483.40.29?
Yes. The EBTI database holds decisions on 8483.40.29, for example DEBTI5936/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8483.40.29 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8483.40.29 to 8A002o, 8A002o. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8483.40.29 change?
8483.40.29 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.