Customs tariff code 8483.40.51.90: Other
Reference data as at 1 July 2026
Customs tariff code 8483.40.51.90 covers Other. The third-country duty rate is 3.7 %, plus import VAT.
8483.40.51.90 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8483.40.51.90
- Third-country duty
- 3.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8483Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
- 8483.40Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters
- 8483.40.51Gear boxes
- 8483.40.51.90Other
From HS code to customs tariff code 8483.40.51.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 8A002oMarine systems, equipment and components, as follows:
- 8A002oMarine systems, equipment and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Contre bride usinée pour réducteur. Cette pièce en aluminium permet au client de fixer et de centrer son moteur sur le réducteur. L'article est en aluminium coulé à partir de métal en fusion dans des moules pour donner la forme de la pièce. Les pièces sont formées spécifiquement pour les réducteurs.
Carter usiné pour réducteur. Il permet de protéger le cœur du réducteur, à savoir le système roue et vis sans fin. Il est soit en aluminium, soit en fonte selon le modèle. Les pièces sont coulées à partir de métal en fusion dans des moules pour donner la forme de la pièce. Elles sont formées spécifiquement pour les réducteurs.
Entraînement de pompe et boîte d’engrenage, destinés à des applications agricoles, de la construction, de la foresterie, de l’industrie minière, de la servitude au sol des aéronefs, de l’entretien des chemins de fer, etc. La boite d’entraînement de pompes hydrauliques est l’interface entre un moteur (thermique ou électrique) et plusieurs pompes hydrauliques. A partir d’un mouvement de rotation en entrée (celui du moteur), la boite permet de générer plusieurs mouvements de rotation en sortie pour l’entraînement de pompes hydrauliques. A l’intérieur, un système d’engrenages transmet le couple provenant du moteur aux arbres de sortie. La taille relative des engrenages permet d’obtenir un ratio entre la vitesse de rotation en entrée et les vitesses de rotation des arbres de sortie. Le couple transmis est inversement proportionnel à ce ratio.
Riduttore epicicloidale a corpo o flangia rotante, idoneo all’azionamento diretto di tamburi di autobetoniere, montato su veicoli da cantiere (dumper betoniere). Il riduttore consente di trasmettere al tamburo la coppia necessaria per la mescolazione e lo scarico del calcestruzzo. A seconda del modello e del tipo di betoniera sul quale viene installato, il riduttore presenta una predisposizione per il collegamento ad un motore idraulico che genera la coppia. Secondo quanto dichiarato, il riduttore opera solo nella rotazione del tamburo della betoniera.
Dle poskytnutých údajů se jedná o víko na převodovku pro jednoosou ručně vedenou bubnovou sekačku s motorem do 223 cm3. Výrobek je odlitý ze slitiny hliníku (materiál ADC 12). Jedná se o přesně tvarovaný výrobek, který je vhodný hlavně a výhradně pro dané zařízení.
Een zogenoemde main drive, zijnde een tandwielkast, met onder meer de volgende uiterlijke en technische kenmerken: - 2 metalen platen, speciaal gevormd en voorzien van bevestigingsgaten; - daartussen diverse tandwielen, vervaardigd van kunststof, in verschillende maten en met verschillende inkepingen, sommige onderling verbonden door een getande riem; - 2 printplaatjes met aansluitpunten; - 2 spoelen; - een –volgens opgave- mechanische motor met aansluitkabel; - bestemd voor een bepaald type printer. Het artikel heeft de functie het papier door te voeren in samenwerking met –volgens opgave- een controller.
Een zogenoemde main drive, zijnde een tandwielkast, met onder meer de volgende uiterlijke en technische kenmerken: - een metalen grondplaat, speciaal gevormd en voorzien van bevestigingsgaten; - diverse tandwielen, vervaardigd van kunststof, in verschillende maten en met verschillende inkepingen; - een printplaat voorzien van een aansluitpunt voor een kabel; - een spoel; - bestemd voor inbouw in een printer. Het artikel heeft de functie het papier door te voeren in samenwerking met –volgens opgave- een controller.
Een zogenoemde printer feed drive, zijnde een tandwielkast, met onder meer de volgende uiterlijke en technische kenmerken: - een metalen plaat, speciaal gevormd voorzien van bevestigingspunten; - op de metalen plaat diverse tandwielen, vervaardigd van kunststof, in verschillende maten en inkepingen, deels in een behuizing van kunststof; - een aansluitkabel; - een –volgens opgave- mechanische motor; - bestemd voor een bepaald type printer. Het artikel heeft de functie het papier door te voeren in samenwerking met –volgens opgave- een controller.
Notes that govern this classification
Zu Unterposition 8483 40: 1. Kugel- oder Rollen-Drehverbindungen (für Unterwagen von Kranen, Baggern usw., zum Befestigen und Drehen des schwenkbaren Überwagens). Sie bestehen aus 1) einem oder mehreren metallenen Kränzen (mit eingebauten Kugel- oder Rollenlagern), die auf dem feststehenden Teil (Unterwagen) der Maschine befestigt werden, für die sie bestimmt sind, sowie 2) aus einem metallenen Zahnkranz zum Tragen und Drehen des schwenkbaren Teils (Oberwagen) dieser Maschine. Die Drehbewegung wird vom Motor auf den Zahnkranz übertragen.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 1452/2007 der Kommission vom 7. Dezember 2007 (ABL EU Nr. L 325, Seite 66) (RV L1452/2007): 1. Ein Kugeldrehkranz, bestehend aus zwei konzentrischen Schmiedestahlringen, von denen einer mit einer Verzahnung versehen ist. Die Ringe sind drehbar, da sie durch Reihen von Stahlkugellagern getrennt sind. Durch die Verzahnung entsteht eine Drehmomentübertragung. Die Ware ist zum Einbau in einen Bagger bestimmt. Unterposition 8483 90 89 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2 a zum Abschnitt XVI und dem Wortlaut der KN-Codes 8483, 8483 90 und 8483 90 89. …
Nationale Entscheidungen und Hinweise (NEH) Internationale Entscheidungen und Hinweise (IEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 250. Sitzung des Ausschusses für den Zollkodex vom 4. bis 6. Dezember 2023: Warenbeschreibung: Antriebsrad einer Raupen-Erdbewegungsmaschine Es handelt sich um eine Ware in Form eines Zahnrads aus Stahl, das so ausgelegt ist, dass es in eine Raupenkette greift, um als Antriebsrad einer Erdbewegungsmaschine zu dienen. Das Antriebsrad stellt das Bewegungselement der Raupenkette dar. Das Kettenrad ist über ringförmig angebrachte Bolzen mit der Antriebswelle verbunden. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8483.40.51.90 cover?
Code 8483.40.51.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8483.40.51.90?
The third-country duty rate for 8483.40.51.90 is 3.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8483.40.51.90?
The first six digits form the HS code: 848340. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8483.40.51.90 have?
8483.40.51.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8483.40.51.90 sit in the tariff?
8483.40.51.90 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8483 Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) > 848340 Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters > 84834051 Gear boxes. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8483.40.51.90?
Yes. The EBTI database holds decisions on 8483.40.51.90, for example FRBTIFR-BTI-2025-04312. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8483.40.51.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8483.40.51.90 to 8A002o, 8A002o. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8483.40.51.90 change?
8483.40.51.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.