Customs tariff code 8483.60.80: Clutches and shaft couplings (including universal joints), andere
Reference data as at 1 July 2026
Customs tariff code 8483.60.80 covers Clutches and shaft couplings (including universal joints), andere. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
8483.60.80 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8483.60.80
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8483Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
- 8483.60Clutches and shaft couplings (including universal joints)
- 8483.60.80Clutches and shaft couplings (including universal joints), andere
From HS code to customs tariff code 8483.60.80
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Juntas desmontables tipo macho o hembra, fabricada en acero, de forma prismática con extremos tubulares y con pasador de bloqueo incorporado. Se presentan con longitudes aproximadas de 184 o 246 mm. Por uno de sus extremos se montarán en el eje que viene del motor (gearbox shaft) y por el otro se conectarán con el árbol de transmisión (driveline) de un seguidor solar. Función o uso: Según la información aportada se destinan a ser montadas con el árbol de trasmisión (no incluido) con el que conformarían el órgano de transmisión completo del seguidor solar, con la función de transmitir el movimiento entre filas del mismo.
Schaltkupplung, sog. Visco-Kupplung, Abbildung siehe Anlage, - elektronisch geregelte Kupplung für einen Lüfter (Ventilator) in einem überwiegend aus Aluminiumdruckguss bestehenden Gehäuse (Angabe des Anmelders) - dient dem Zu- und Abschalten des Kühllüfters bzw. der Regulierung der Lüfterdrehzahl und wird zusammen mit einem Lüfterrad (nicht Bestandteil dieser VZTA) vor dem Kühler eines Motors für Kraftfahrzeuge montiert "Schaltkupplung, nicht aus Eisen oder Stahl gegossen, nicht für zivile Luftfahrzeuge"
Anelli per terminali. Gli anelli costituiscono dei sottocomponenti di un terminale a snodo. Questi articoli presentano una sede sferica che andrà ad accoppiarsi con la rotula una volta montata sul corpo. Sono realizzati in acciaio tramite lavorazione meccanica e si presentano di colore grigio metallo. Gli anelli sono presentati in diverse dimensioni.
A határozat tárgya szabadonfutó, belső égésű motorhoz.
Jednoczęściowe sprzęgło zaciskowe wykonane ze stali nierdzewnej, składające się z cylindrycznej tulei oraz śrub zaciskowych. Służy jako łącznik pomiędzy wałkami silników elektrycznych a przekładniami - tworząc zespół napędowy. Stosowane w układach przenoszących ruch obrotowy na inne elementy lub zamieniających ruch obrotowy na ruch posuwisty lub posuwisto-zwrotny, np. cięgna, windy. Sprzęgło przeznaczone jest do maszyn/urządzeń pracujących w trudnych warunkach otoczenia (opary kwasów i zasad) - typu wanny, zbiorniki, mieszadła przy obróbce chemicznej płytek PCB (płytki obwodów drukowanych). Wymiary: 40 x 110 mm. Pakowane w woreczki foliowe i karton.
Rutschkupplung, - im Wesentlichen bestehend aus einem spezifisch geformten Erzeugnis in Form eines Steckmoduls und einem Gehäuse; aus Messing bzw. Stahl, - mit beliebig einstellbarem Übertragungsdrehmoment, - dient als variabler Kraftschluss zwischen zwei Wellen z. B. im Personen- bzw. Geräteschutz oder in einem Schraubverschluss. "Schaltkupplungen und andere Wellenkupplungen, nicht aus Eisen oder Stahl gegossen"
Wellenkupplung, sog. Balgkupplung, - zylindrisches, mit Gewinde versehenes Erzeugnis aus Aluminium (Länge ca 29 mm) mit eingesetzten Bälgen aus Edelstahl, beidseitig mit einer Bohrung (Ø 10 mm) versehen - zur Verwendung als Verbindungsstück einer Maschinenwelle mit der Encoderwelle (Angabe des Antragstellers) in einem sog. Vollwellendrehgeber (nicht Gegenstand dieser vZTA) "Wellenkupplung, nicht aus Eisen oder Stahl gegossen"
Schaltkupplung, sog. Schiebekupplung, - im Wesentlichen bestehend aus einem nach technischer Zeichnung gefertigten Erzeugnis aus einem Zylinder und einem hydraulisch betätigten Kolben mit angebrachten Zahnrad und weiteren Bauelementen; aus Rundstahl, nicht gegossen, - dient nach Einbau in einen sog. Werkzeugrevolver (siehe vZTA DEBTI-44319/ 22-1) der lösbaren Verbindung zweier Wellen und überträgt das Drehmoment, das in dem Werkzeugrevolver mittels Elektromotor erzeugt wird, auf ein anzutreibendes Werk- zeug (alle nicht Gegenstand der vZTA). "Schaltkupplung aus Stahl, nicht gegossen"
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören hauptsächlich mechanische Vorrichtungen, die zur Kraftübertragung dienen, 1. entweder von einer Antriebsmaschine auf eine oder mehrere Arbeitsmaschinen oder 2. von einem Maschinenteil auf einen anderen innerhalb derselben Maschine. A) Wellen (einschließlich Nockenwellen und Kurbelwellen) und Kurbeln Die Vorrichtungen dieser Gruppe übertragen in der Regel die Antriebskraft als Drehbewegung. Nach ihrer Arbeitsweise und Form unterscheidet man: 1) Antriebswellen. Sie werden unmittelbar vom Motor angetrieben. 2) Abtriebswellen. Sie erhalten die Bewegung von der Antriebswelle über ein Getriebe, eine Riemenscheibe mit Treibriemen oder auf andere Weise und übertragen sie auf Maschinen oder andere Abtriebswellen. 3) Gelenkwellen. Sie bestehen aus zwei oder mehr Wellenteilen, die durch Kugelgelenke, Kreuzgelenke usw. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 1452/2007 der Kommission vom 7. Dezember 2007 (ABL EU Nr. L 325, Seite 66) (RV L1452/2007): 1. Ein Kugeldrehkranz, bestehend aus zwei konzentrischen Schmiedestahlringen, von denen einer mit einer Verzahnung versehen ist. Die Ringe sind drehbar, da sie durch Reihen von Stahlkugellagern getrennt sind. Durch die Verzahnung entsteht eine Drehmomentübertragung. Die Ware ist zum Einbau in einen Bagger bestimmt. Unterposition 8483 90 89 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2 a zum Abschnitt XVI und dem Wortlaut der KN-Codes 8483, 8483 90 und 8483 90 89. …
Nationale Entscheidungen und Hinweise (NEH) Internationale Entscheidungen und Hinweise (IEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 250. Sitzung des Ausschusses für den Zollkodex vom 4. bis 6. Dezember 2023: Warenbeschreibung: Antriebsrad einer Raupen-Erdbewegungsmaschine Es handelt sich um eine Ware in Form eines Zahnrads aus Stahl, das so ausgelegt ist, dass es in eine Raupenkette greift, um als Antriebsrad einer Erdbewegungsmaschine zu dienen. Das Antriebsrad stellt das Bewegungselement der Raupenkette dar. Das Kettenrad ist über ringförmig angebrachte Bolzen mit der Antriebswelle verbunden. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8483.60.80 cover?
Code 8483.60.80 covers Clutches and shaft couplings (including universal joints), andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8483.60.80?
TARIC holds no third-country rate of its own for 8483.60.80. The rate follows from the declarable commodity code beneath it.
What is the HS code for 8483.60.80?
The first six digits form the HS code: 848360. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8483.60.80 have?
8483.60.80 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8483.60.80 sit in the tariff?
8483.60.80 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8483 Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) > 848360 Clutches and shaft couplings (including universal joints). The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8483.60.80?
Yes. The EBTI database holds decisions on 8483.60.80, for example ESBTIESBTI2026SOL737. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8483.60.80 change?
8483.60.80 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.