Customs tariff code 8484.20.00.90: Other
Reference data as at 1 July 2026
Customs tariff code 8484.20.00.90 covers Other. The third-country duty rate is 1.7 %, plus import VAT.
8484.20.00.90 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8484.20.00.90
- Third-country duty
- 1.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8484Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals
- 8484.20Mechanical seals
- 8484.20.00mechanische Dichtungen
- 8484.20.00.90Other
From HS code to customs tariff code 8484.20.00.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0B001cPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
- 0B001cPlant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Dle poskytnutých údajů a předložené fotodokumentace se jedná o hřídelové těsnění (mechanickou ucpávku). Výrobek zamezuje úniku provozních kapalin z elektromotoru vodního čerpadla a je sestaven ze 4 částí: krycí plech pružiny, pružina, mechanické těsnění rotační, mechanické těsnění stacionární. Zboží má kruhovitý tvar. Materiál: kovové části nerezová ocel AISI 304, dosedací plochy SiC - karbid křemíku, měkké části FKM (fluorkaučuk). Dodáváno v rozloženém stavu.
Dle deklarovaných údajů se jedná o hřídelové těsnění (mechanickou ucpávku). Výrobek zamezuje úniku provozních kapalin z elektromotoru a je sestaven z ocelové pružiny zakončené dosedací krytkou na jedné straně a držákem těsnění na druhé straně; keramickým těsněním černé barvy vsazeného do gumového těsnění černé barvy Zboží má kruhovitý tvar, vnější průměr 30 mm, vnitřní průměr 12 mm, výšku 40 mm.
Joints d’étanchéité mécaniques, se présentant sous la forme d’anneaux constitués en inox majoritaire (80%), silicium (à 15%) et EPDM (à 5%), destinés à être installés sur une pompe centrifuge pour assurer l’étanchéité mécanique. Le joint est constitué de 3 parties (2 anneaux et un anneau équipé d’une bride munie de trous de fixation) qui devront être assemblées. Selon les modèle, il peut être constitué d’un seul anneau. Ils sont présentés à l’état usagé, seules les parties cassées ou usées ont été remplacées. Leurs dimensions sont les suivantes : 20 mm à 200 mm selon les modèles.
Joints d’étanchéité mécaniques, se présentant sous la forme d’anneaux constitués en inox majoritaire (80%), silicium (à 15%) et EPDM (à 5%), destinés à être installés sur une pompe centrifuge pour assurer l’étanchéité mécanique. Le joint est constitué de 3 parties (2 anneaux et un anneau équipé d’une bride munie de trous de fixation) qui devront être assemblées. Selon les modèle, il peut être constitué d’un seul anneau. Ils sont présentés à l’état neuf. Leurs dimensions sont les suivantes : 20 mm à 200 mm selon les modèles.
Gleitringdichtung (Abbildung siehe Anlage) - in Form eines zylinderförmigen Elements mit zwei Endkappen, einer integrierten Spiral- feder und Dichtungsringen, mit einer Abmessung von ca. 28 x 16 x 24 mm, - zur Abdichtung rotierender Pumpenteile in einer Tiefbrunnenpumpe, um das Austreten von Wasser entlang der Welle zu verhindern. "Mechanische Dichtung, keine Ware der TARIC-Codes 8484 2000 10 bis 8484 2000 20"
Mechanische Dichtung, bestehend aus einer Innen- (Durchmesser 24,6mm) und Außenschale (Durchmesser 49,75mm) aus Edelstahl, jeweils mit einem FFKM-O-Ring zur statischen Abdichtung, sowie einer ringförmigen, magnetischen Zone, in der sich das Ferrofluid befindet. Das Ferrofluid bildet eine dynamische, magnetisch gehaltene Flüssigkeitsbarriere zwischen den Schalen und verhindert das Austreten von Gasen oder Flüssigkeiten bei rotierender Bewegung. Die Dichtung hat keine tragende Lagerfunktion. (Angaben laut Antragsteller, Abbildung siehe Anlage)
Mechanische Dichtung - aus einem Deckel, einer Scheibe und einem rotierenden Bauteil in Form eines Rings, aus Stahl, - zum Einbau in das Getriebe eines Schienenfahrzeugs, zur Verminderung des Ölaustritts und des Wassereintritts bei hohen Rotationsgeschwindigkeiten ohne Reibung zu verursachen. "Mechanische Dichtung, keine Ware des TARIC-Codes 8484 2000 10 - mechanische Dichtung"
Gumokovové tesnenie piestnej tyče kruhového tvaru s pružinou. Tesnenie sa používa v dvojtrubkových tlmičoch a slúži na utesnenie počas chodu piestnej tyče , kde vrchná časť naľavo tesni proti prachu a vonkajším nečistotám a spodná pravá strana tesnenia slúži na utesnenie vnútorného priestoru tlmiča proti uniku oleja a vzduchu z dielu. Skladá sa: z gumy, kovového plátku a pružinového krúžku.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) A. Metalloplastische Dichtungen Metalloplastische Dichtungen bestehen: Entweder 1) aus einer Lage von Asbest (oder auch von Filz, Pappe oder anderem nichtmetallischen Material), die zwischen zwei Lagen von Metall (Folien oder Blechen) eingebettet ist, oder 2) aus einer Lage von Asbest oder von anderem, durch Ausstanzen geformten nichtmetallischen Material, deren Außenrand und ggf. deren im Material angebrachte Löcher oder Durchgänge (Aussparungen) mit Metallstreifen eingefasst sind, oder 3) aus vielen Lagen von Metallfolien aus demselben Metall oder aus verschiedenen Metallen. Metalloplastische Dichtungen werden hauptsächlich zum Abdichten bestimmter Teile von Motoren (Zylinderköpfen), Pumpen usw. von gewissen Rohrleitungen verwendet. …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 183. Sitzung des Ausschusses für den Zollkodex vom 23. bis 26. Oktober 2017: Warenbeschreibung: Radialwellendichtringe (sog. Simmerringe) Die Ware wird als Dichtung verwendet, um Maschinengehäuse an austretenden Teilen (meist Wellen oder Schubstangen) gegen die Umgebung abzudichten. Diese Radialwellendichtringe bestehen mindestens aus einem Außenmantel, einer Dichtlippe aus Weichkautschuk, einem Versteifungsring und einer Wurmfeder. Der zylindrische Außenmantel stellt dabei die statische Abdichtung an der Austrittsstelle im Gehäuse sicher und fixiert den Radialwellendichtring im Gehäuse. Dabei verleiht der Versteifungsring dem Radialwellendichtring die nötige Stabilität. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8484.20.00.90 cover?
Code 8484.20.00.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8484.20.00.90?
The third-country duty rate for 8484.20.00.90 is 1.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8484.20.00.90?
The first six digits form the HS code: 848420. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8484.20.00.90 have?
8484.20.00.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8484.20.00.90 sit in the tariff?
8484.20.00.90 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8484 Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals > 848420 Mechanical seals > 84842000 mechanische Dichtungen. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8484.20.00.90?
Yes. The EBTI database holds decisions on 8484.20.00.90, for example CZBTI48/503850/2026-300000-ZI/01. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8484.20.00.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8484.20.00.90 to 0B001c, 0B001c. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8484.20.00.90 change?
8484.20.00.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.