Customs tariff code 8486.40.00.00: Machines and apparatus specified in note 11(C) to this chapter
Reference data as at 1 July 2026
Customs tariff code 8486.40.00.00 covers Machines and apparatus specified in note 11(C) to this chapter. The third-country duty rate is 0 %, plus import VAT.
8486.40.00.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8486.40.00.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8486Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 11(C) to this chapter; parts and accessories
- 8486.40Machines and apparatus specified in note 11(C) to this chapter
- 8486.40.00.00Machines and apparatus specified in note 11(C) to this chapter
From HS code to customs tariff code 8486.40.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 3A502General purpose "electronic assemblies", modules and equipment, as follows:
- 3B001eEquipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
- 3B001fEquipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
- 3B501Equipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Unfertiges Gerät zur Elektronenstrahllithografie, im Wesentlichen bestehend aus einer Plattform, auf der ein Maskenschreiber für die Halbleiterproduktion montiert ist. Diese Plattform dient mit allen Komponenten dazu, Masken (das sind 15 x 15 cm große Glasscheiben, auf der sich eine Chromschicht und eine elektronensensitive Schicht befinden) und Rohlinge einzubringen, zu positionieren und nach der Beschreibung wieder auszugeben; sie beinhaltet Aktuatoren und Sensoren, welche durch die Elektronik in den sog. Racks angesteuert/geregelt werden. Die Verbindungen mit der Hauptplattform bestehen aus Strom (Signal und Strom), Wasser, Gas und Vakuum. Gesteuert werden die Einzelkomponenten durch eine zentrale Rechenstelle. Alle Bestandteile sind durch Kabel und Leitungen miteinander verbunden (funktionelle Einheit). (Angaben laut Unternehmen)
Molding-Maschine - im Wesentlichen aus Vorheizmodul, Bauteile-Handhabungssystem, Verkapselungseinheit mit bis zu vier Pressen, Maschinensteuerung, Ultra-Vakuumsystem, in einem Schrank- gehäuse mit Bedien- und Anzeigeelementen, - zum Einhausen (Verkapseln) von Halbleiterbauelementen (z. B. Prozessoren, Dioden usw.) und elektronischen Bauelementen in Gehäuse durch Verpressen mit Kunststoff zum Schutz vor äußeren Einflüssen. "Maschine ausschließlich verwendet zum Zusammenbauen von Halbleiterbauelementen oder elektronischen integrierten Schaltungen von Halbleiter-scheiben (wafers) und elektronischen Bauelementen, in Anmerkung 11 C) zu Kapitel 84 genannt - Molding-Maschine"
Unfertiges Gerät zur Elektronenstrahllithografie, im Wesentlichen bestehend aus einer Plattform auf der ein Masken Schreiber für die Halbleiterproduktion montiert ist. Diese Plattform dient mit allen Komponenten dazu, Masken (das sind 15 x 15 cm große Glasscheiben, auf der sich eine Chromschicht und eine elektronensensitive Schicht befinden) Rohlinge einzubringen, zu positionieren und nach der Beschreibung wieder auszugeben; sie beinhaltet Aktuatoren und Sensoren welche durch die Elektronik in den sog. Racks angesteuert/geregelt werden. Die Verbindungen mit der Hauptplattform bestehen aus Strom (Signal und Strom), Wasser, Gas und Vakuum. Gesteuert werden die Einzelkomponenten durch eine zentrale Rechenstelle. Alle Bestandteile sind durch Kabel und Leitungen miteinander verbunden (funktionelle Einheit). (Angaben laut Antragsteller)
Module pour l’installation de capteurs d’empreinte digitale pour machine modulaire pour la personnalisation de cartes à puce ou à piste magnétique. Il comporte une bobine pour l’alimentation du module en senseurs à intégrer dans les cartes. Ce module a vocation à insérer et à connecter, dans une carte intelligente, un circuit électronique comportant un capteur d’empreinte digitale, à l’aide d’un procédé employant un film conducteur anisotrope (ACF). Le module est composé d’aluminium, avec une cartérisation en acier inoxydable.
Machine modulaire pour la personnalisation de cartes à puce ou à piste magnétique. Ses différents modules sont assemblés en série. Les différents modules constituant la machine sont composés d’aluminium, avec une cartérisation en acier inoxydable. La machine intègre au moins : - un module de commande, - un module pour l’entrée et un pour la sortie des cartes à personnaliser, - un module de rejet des cartes non conformes, et - un module pour l’insertion de capteurs d’empreinte digitale dans les cartes. D’autres modules pour la personnalisation de l’apparence de la carte peuvent être présents ou non. L’ensemble ne comporte pas de module pour l’encodage pour cartes à puce, de module d’encodage pour pistes magnétiques ou de module de contrôle vidéo de l’apparence des cartes.
Sog. Maschine für die Herstellung von Halbleiterbauelementen - aus Sinter-Presssystem mit sog. Pressur-Sintering-Tool, Siiberpaste-Auftragseinheit, Heizvorrichtung, Vakuumpumpe und Stromversorgungseinheit, in einem Schrank- gehäuse mit Bedienelementen und Versorgungsanschlüssen (Abbildung siehe Anlage), - zum leitenden Verbinden von Halbleiterchips und Substraten durch Druck und Temperatur im Rahmen der Herstellung von Elektronikbauteilen (Silver-Sintering). "Maschine ausschließlich oder hauptsächlich verwendet zum Zusammenbauen von Halbleiterbauelementen oder elektronischen integrierten Schaltungen, in Anmerkung 9 C) zu Kapitel 84 genannt - sog. Maschine für die Herstellung von Halbleiterbauelementen (Sinter-Presse)"
Bei dem Erzeugnis handelt es sich um einen 3-Achsen Handhabungsroboter, der (?ber eine ?bergeordnete Steuerung) automatisch nach Programm Silizium-Wafer auf bestimmte Positionen der Maschine bel?dt und entl?dt (pick & place handling). (Angaben laut Antragsteller)
Wafer Handhabungsgerät - im Wesentlichen aus einer Kassettenstation für das Aufsetzen einer Waferkassette, einem mechanischen Elevator zum Heben und Senken der Kassettenstation, einer automatischen linearen Führungseinrichtung mit Vakuumgreifer, einer automatischen Datenverarbeitungs- maschine mit Monitor zur Steuerung und Bedienung des Gerätes sowie Komponenten zur Stromversorgung, - zum sequentiellen automatischen Zu- und Abführen von Wafern sowie zum Positionieren und Rotieren auf einem in ein optisches Mikroskop eingebauten mechanischen Verfahrtisch (diese nicht Gegenstand dieser vZTA). "Maschine ausschließlich verwendet zum Heben, Fördern, Laden und Entladen von Halbleiterscheiben (wafers), in Anmerkung 9 C) zu Kapitel 84 genannt - Wafer Handhabungsgerät (sog. Micro Loader)"
Notes that govern this classification
Zu Unterposition 8486 40 00: Neben den in den Erläuterungen zu Position 8486 des HS, Teil D, genannten Maschinen gehören hierher z.B. 1. Vorrichtungen zum Positionieren und Bonden von Halbleiterbauelementen oder elektronischen integrierten Schaltungen bei der Montage; 2. Fotoapparate zum Herstellen von Masken und Reticles aus mit Fotolack beschichteten Substraten; 3. Anreißinstrumente und -geräte zum Herstellen von Masken und Reticles aus mit Fotolack beschichteten Substraten; 4. bestimmte Maschinen und Apparate zum Herstellen von hybriden integrierten Schaltungen (durch Bearbeiten und Zuschneiden größerer Tafeln aus Keramik oder anderem Isoliermaterial), wie z.B.: a) Bürstmaschinen und Ultraschallwaschmaschinen, zum Reinigen der Tafeln aus Isoliermaterial; b) Walz- oder Gießmaschinen zum Auftragen von Fotolack, Fotoresist, Haftvermittler oder Kleber auf die Tafeln aus Isoliermaterial.
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Urteil des EuGH vom 19. Juli 2012 (RS C-336/11) Aus diesen Gründen hat der Gerichtshof (Achte Kammer) für Recht erkannt: Die Kombinierte Nomenklatur … ist dahin auszulegen, dass Polierscheiben, die für eine Poliermaschine zur Bearbeitung von Halbleitern - die als solche in die Tarifposition 8464 (oder ab 1. Januar 2007 in die Position 8486) einzureihen ist - bestimmt und getrennt von der Maschine eingeführt worden sind, sich als in der Mitte gelochte Scheiben aus einer harten Schicht aus Polyurethan, einer Schicht aus Polyurethanschaum, einer Klebeschicht und einer Schutzfolie aus Kunststoffen darstellen, weder irgendein Teil aus Metall noch irgendein Schleifmittel enthalten, mit einem flüssigen Schleifmittel für das Polieren von Wafern verwendet werden und je nach Abnutzungsgrad in bestimmten Abständen ersetzt werden müssen, als sel …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8486.40.00.00 cover?
Code 8486.40.00.00 covers Machines and apparatus specified in note 11(C) to this chapter. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8486.40.00.00?
The third-country duty rate for 8486.40.00.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8486.40.00.00?
The first six digits form the HS code: 848640. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8486.40.00.00 have?
8486.40.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8486.40.00.00 sit in the tariff?
8486.40.00.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8486 Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 11(C) to this chapter; parts and accessories > 848640 Machines and apparatus specified in note 11(C) to this chapter. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8486.40.00.00?
Yes. The EBTI database holds decisions on 8486.40.00.00, for example ATBTI2025000204-DEC. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8486.40.00.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8486.40.00.00 to 3A502, 3B001e, 3B001f, 3B501. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8486.40.00.00 change?
8486.40.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.