Customs tariff code 8501.10.10.20.0: Synchronmotor für Geschirrspülmaschinen mit Wasserfluss-Steuerungsmechanismus mit…
Reference data as at 1 July 2026
Customs tariff code 8501.10.10.20.0 covers Synchronmotor für Geschirrspülmaschinen mit Wasserfluss-Steuerungsmechanismus mit, einer Länge ohne Achse von 24 mm (± 0,3), einem Durchmesser von 49,3 mm (± 0,3), einer Nennspannung von 220 V Wechselstrom oder mehr, jedoch nicht mehr als 240 V Wechselstrom, einer Nennfrequenz von 50 Hz oder mehr, jedoch nicht mehr als 60 Hz, einer Eingangsleistung von nicht mehr als 4 W, einer Drehzahl von 4 U/min oder mehr, jedoch nicht mehr als 4,8 U/min, einem Ausgangsdrehmoment von nicht weniger als 10 kgf/cm. The third-country duty rate is 4.7 %, plus import VAT.
8501.10.10.20.0 is national commodity code in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8501.10.10.20.0
- Third-country duty
- 4.7 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
- 8501Electric motors and generators (excluding generating sets)
- 8501.10Motors of an output not exceeding 37,5 W
- 8501.10.10Synchronous motors of an output not exceeding 18 W
- 8501.10.10.20Synchronous motor for a dishwasher with a water flow control mechanism with - a length without axle of 24 mm (+/- 0,3), - a diameter of 49,3 mm (+/- 0,3) - a rated voltage of 220 V AC or more but not more than 240 V AC, - a rated frequency of 50 Hz or more but not more than 60 Hz, - an input power of not more than 4 W, - a rotation speed of 4rpm or more but not more than 4,8rpm, - an output torque of not less than 10kgf/cm
- 8501.10.10.20.0Synchronmotor für Geschirrspülmaschinen mit Wasserfluss-Steuerungsmechanismus mit, einer Länge ohne Achse von 24 mm (± 0,3), einem Durchmesser von 49,3 mm (± 0,3), einer Nennspannung von 220 V Wechselstrom oder mehr, jedoch nicht mehr als 240 V Wechselstrom, einer Nennfrequenz von 50 Hz oder mehr, jedoch nicht mehr als 60 Hz, einer Eingangsleistung von nicht mehr als 4 W, einer Drehzahl von 4 U/min oder mehr, jedoch nicht mehr als 4,8 U/min, einem Ausgangsdrehmoment von nicht weniger als 10 kgf/cm
From HS code to customs tariff code 8501.10.10.20.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 4.7 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 7A001Accelerometers as follows and specially designed components therefor:
- 7A002Gyros or angular rate sensors, having any of the following and specially designed components therefor:
- 7A003'Inertial measurement equipment or systems', having any of the following:
- 7A004'Star trackers' and components therefor, as follows:
- 7A101Linear accelerometers, other than those specified in 7A001, designed for use in inertial navigation systems or in guidance systems of all types, usable in 'missiles', having all of the following characteristics, and specially designed components therefor:
- 7A102All types of gyros, other than those specified in 7A002, usable in 'missiles', with a rated "drift rate" 'stability' of less than 0,5° (1 sigma or rms) per hour in a 1 g environment and specially designed components therefor.
- 7A103Instrumentation, navigation equipment and systems, other than those specified in 7A003, as follows; and specially designed components therefor:
- 7A104Gyro-astro compasses and other devices, other than those specified in 7A004, which derive position or orientation by means of automatically tracking celestial bodies or satellites and specially designed components therefor.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) (entfallen) Hierher gehören z. B. Elektromotoren für Scheibenwischer, ohne Wischarm und Wischblatt, jedoch mit den für die Umwandlung der Drehbewegung in eine Pendelbewegung erforderlichen Kraftübertragungsvorrichtungen (Stirnradgetriebe und hin- und hergehende Stange).
Erläuterungen zum Harmonisierten System (HS) I) Elektromotoren Elektromotoren setzen elektrische Energie in mechanische Energie um. Zu dieser Gruppe gehören rotierende Motoren und lineare Motoren. A) Rotierende Elektromotoren erzeugen mechanische Energie in Form einer Drehbewegung. Es gibt zahlreiche Arten von rotierenden Elektromotoren, deren Merkmale voneinander abweichen, je nachdem, ob sie mit Gleichstrom oder Wechselstrom gespeist werden und je nach dem Verwendungszweck, für den sie gebaut sind. Bei manchen Motoren ist das Gehäuse der Umgebung, in der sie zu arbeiten haben, besonders angepasst, z. B. um sie gegen Staub und Feuchtigkeit zu schützen (so genannte gekapselte Motoren) oder auch um Brand- und Explosionsgefahr auszuschließen (Motoren mit schlagwettersicherem Gehäuse). …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2015/2255 der Kommission vom 02. Dezember 2015 (ABl. EU Nr. L 321/10) (RV L 15/2255) Eine Ware in Form eines flachen Zylinders (sogenannter „Mini-Vibrationsmotor“) mit einem Durchmesser von 9 mm und einer Höhe von 4 mm, mit eingebautem Gleichstrommotor, Spannung: 4 V, Leistung: 1 W. Die Ware ist für die Verwendung in Tablets, Mobiltelefonen usw. bestimmt, um einen Vibrationseffekt zu erzeugen. Dieser Effekt entsteht durch die Rotation eines asymmetrisch an den Motorschaft angebrachten Gewichts. Für den Einbau ist die Ware an einer Seite mit einem Klebeband versehen. (Siehe Abbildung) Unterposition 8479 89 97 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 8479, 8479 89 und 8479 89 97. …
Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 278. Sitzung des Ausschusses für den Zollkodex vom 2. bis 4. März 2026: Warenbeschreibung: Das Spielzeug ist ein interaktives elektronisches Gerät, bestehend aus einer rechteckigen Kunststoffbox mit berührungsempfindlichem Bedienfeld, einem breiten, dünnen Plättchen mit Sensor (bewegliches Hologramm-Display), lichtemittierenden Dioden (LED), starken Neodym-Magneten, einer Magnetspule und 3 AA-Batterien. Neben diesen Komponenten sind keine weiteren Komponenten enthalten. Wenn die Box geöffnet wird, vibriert das Plättchen und es wird mit Hilfe der Dioden ein Bild einer Figur erzeugt und ein Ton abgespielt. …
Frequently asked questions
What does customs tariff code 8501.10.10.20.0 cover?
Code 8501.10.10.20.0 covers Synchronmotor für Geschirrspülmaschinen mit Wasserfluss-Steuerungsmechanismus mit, einer Länge ohne Achse von 24 mm (± 0,3), einem Durchmesser von 49,3 mm (± 0,3), einer Nennspannung von 220 V Wechselstrom oder mehr, jedoch nicht mehr als 240 V Wechselstrom, einer Nennfrequenz von 50 Hz oder mehr, jedoch nicht mehr als 60 Hz, einer Eingangsleistung von nicht mehr als 4 W, einer Drehzahl von 4 U/min oder mehr, jedoch nicht mehr als 4,8 U/min, einem Ausgangsdrehmoment von nicht weniger als 10 kgf/cm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8501.10.10.20.0?
The third-country duty rate for 8501.10.10.20.0 is 4.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8501.10.10.20.0?
The first six digits form the HS code: 850110. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8501.10.10.20.0 have?
8501.10.10.20.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 8501.10.10.20.0 sit in the tariff?
8501.10.10.20.0 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8501 Electric motors and generators (excluding generating sets) > 850110 Motors of an output not exceeding 37,5 W > 85011010 Synchronous motors of an output not exceeding 18 W > 8501101020 Synchronous motor for a dishwasher with a water flow control mechanism with - a length without axle of 24 mm (+/- 0,3), - a diameter of 49,3 mm (+/- 0,3) - a rated voltage of 220 V AC or more but not more than 240 V AC, - a rated frequency of 50 Hz or more but not more than 60 Hz, - an input power of not more than 4 W, - a rotation speed of 4rpm or more but not more than 4,8rpm, - an output torque of not less than 10kgf/cm. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8501.10.10.20.0?
The EBTI database currently holds no valid decisions on 8501.10.10.20.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8501.10.10.20.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8501.10.10.20.0 to 7A001, 7A002, 7A003, 7A004, 7A101, 7A102, 7A103, 7A104. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8501.10.10.20.0 change?
8501.10.10.20.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.