Customs tariff code 8501.31.00.52: Electric brushless direct current motor finished with biocompatible materials such as…
Reference data as at 1 July 2026
Customs tariff code 8501.31.00.52 covers Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with: -a three-phase winding, -an output power not exceeding 280 W, -a length with gearhead of 116,1 mm or more but not more than 117,2 mm, -an external diameter of 13,86 mm or more but no more than 13,92 mm, -a maximum torque of motor with gearhead 246,6 mNm in 25℃, -a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C, -a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure, -14 functional pins for power and control purpose, -a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector for use in the manufacture of medical devices with right-left rotation and oscillation function. The third-country duty rate is 2.7 %, plus import VAT.
8501.31.00.52 is TARIC code in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8501.31.00.52
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 0
Where this code sits in the tariff
- 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
- 8501Electric motors and generators (excluding generating sets)
- 8501.31Of an output not exceeding 750 W
- 8501.31.00andere Gleichstrommotoren; Gleichstromgeneratoren, ausgenommen fotovoltaische Generatoren, mit einer Leistung von 750 W oder weniger
- 8501.31.00.52Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with: -a three-phase winding, -an output power not exceeding 280 W, -a length with gearhead of 116,1 mm or more but not more than 117,2 mm, -an external diameter of 13,86 mm or more but no more than 13,92 mm, -a maximum torque of motor with gearhead 246,6 mNm in 25℃, -a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C, -a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure, -14 functional pins for power and control purpose, -a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector for use in the manufacture of medical devices with right-left rotation and oscillation function
From HS code to customs tariff code 8501.31.00.52
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) (entfallen) Hierher gehören z. B. Elektromotoren für Scheibenwischer, ohne Wischarm und Wischblatt, jedoch mit den für die Umwandlung der Drehbewegung in eine Pendelbewegung erforderlichen Kraftübertragungsvorrichtungen (Stirnradgetriebe und hin- und hergehende Stange).
Erläuterungen zum Harmonisierten System (HS) I) Elektromotoren Elektromotoren setzen elektrische Energie in mechanische Energie um. Zu dieser Gruppe gehören rotierende Motoren und lineare Motoren. A) Rotierende Elektromotoren erzeugen mechanische Energie in Form einer Drehbewegung. Es gibt zahlreiche Arten von rotierenden Elektromotoren, deren Merkmale voneinander abweichen, je nachdem, ob sie mit Gleichstrom oder Wechselstrom gespeist werden und je nach dem Verwendungszweck, für den sie gebaut sind. Bei manchen Motoren ist das Gehäuse der Umgebung, in der sie zu arbeiten haben, besonders angepasst, z. B. um sie gegen Staub und Feuchtigkeit zu schützen (so genannte gekapselte Motoren) oder auch um Brand- und Explosionsgefahr auszuschließen (Motoren mit schlagwettersicherem Gehäuse). …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2015/2255 der Kommission vom 02. Dezember 2015 (ABl. EU Nr. L 321/10) (RV L 15/2255) Eine Ware in Form eines flachen Zylinders (sogenannter „Mini-Vibrationsmotor“) mit einem Durchmesser von 9 mm und einer Höhe von 4 mm, mit eingebautem Gleichstrommotor, Spannung: 4 V, Leistung: 1 W. Die Ware ist für die Verwendung in Tablets, Mobiltelefonen usw. bestimmt, um einen Vibrationseffekt zu erzeugen. Dieser Effekt entsteht durch die Rotation eines asymmetrisch an den Motorschaft angebrachten Gewichts. Für den Einbau ist die Ware an einer Seite mit einem Klebeband versehen. (Siehe Abbildung) Unterposition 8479 89 97 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 8479, 8479 89 und 8479 89 97. …
Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 278. Sitzung des Ausschusses für den Zollkodex vom 2. bis 4. März 2026: Warenbeschreibung: Das Spielzeug ist ein interaktives elektronisches Gerät, bestehend aus einer rechteckigen Kunststoffbox mit berührungsempfindlichem Bedienfeld, einem breiten, dünnen Plättchen mit Sensor (bewegliches Hologramm-Display), lichtemittierenden Dioden (LED), starken Neodym-Magneten, einer Magnetspule und 3 AA-Batterien. Neben diesen Komponenten sind keine weiteren Komponenten enthalten. Wenn die Box geöffnet wird, vibriert das Plättchen und es wird mit Hilfe der Dioden ein Bild einer Figur erzeugt und ein Ton abgespielt. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8501.31.00.52 cover?
Code 8501.31.00.52 covers Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with: -a three-phase winding, -an output power not exceeding 280 W, -a length with gearhead of 116,1 mm or more but not more than 117,2 mm, -an external diameter of 13,86 mm or more but no more than 13,92 mm, -a maximum torque of motor with gearhead 246,6 mNm in 25℃, -a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C, -a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure, -14 functional pins for power and control purpose, -a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector for use in the manufacture of medical devices with right-left rotation and oscillation function. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8501.31.00.52?
The third-country duty rate for 8501.31.00.52 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8501.31.00.52?
The first six digits form the HS code: 850131. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8501.31.00.52 have?
8501.31.00.52 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8501.31.00.52 sit in the tariff?
8501.31.00.52 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8501 Electric motors and generators (excluding generating sets) > 850131 Of an output not exceeding 750 W > 85013100 andere Gleichstrommotoren; Gleichstromgeneratoren, ausgenommen fotovoltaische Generatoren, mit einer Leistung von 750 W oder weniger. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8501.31.00.52?
The EBTI database currently holds no valid decisions on 8501.31.00.52. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8501.31.00.52 change?
8501.31.00.52 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.