Customs tariff code 8515.90.80: Parts, andere
Reference data as at 1 July 2026
Customs tariff code 8515.90.80 covers Parts, andere. The third-country duty rate is 2.7 %, plus import VAT.
8515.90.80 is CN code in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8515.90.80
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
- 8515Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets
- 8515.90Parts
- 8515.90.80Parts, andere
From HS code to customs tariff code 8515.90.80
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1B002Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
- 1B003Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
- 1B102Metal powder "production equipment", other than that specified in 1B002, and components as follows:
- 6A005"Lasers", other than those specified in 0B001.g.5. or 0B001.h.6., components and optical equipment, as follows:
- 9B004Tools, dies or fixtures, for the solid-state joining of "superalloy", titanium or intermetallic aerofoil-to-disk combinations described in 9E003.a.3. or 9E003.a.6. for gas turbine engines.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Sonotrode für Ultraschallschweißmaschinen (Abbildung siehe Anlage), - aus einem spezifisch gefertigten Werkzeug, ganz aus Stahl, Titan oder Aluminium, - zum Verstärken und Übertragen der Ultraschallschwingungen auf das Schweißgut, - erkennbar ausschließlich zur Verwendung in der sog. Schwingeinheit von Ultraschallschweißmaschinen. "Teil, erkennbar ausschließlich für eine Ultaschallschweißmaschine der Position 8515, nicht für Wellenlötmaschinen"
Dle deklarovaných údajů se jedná o součást stroje na řezání kovů plazmovým obloukem - vířivý kroužek, který slouží k distribuci plazmového plynu a jeho víření pomocí vyvrtaných otvorů v plazmovém hořáku. Výrobek je zhotoven z pyrofylitu a je osazen o-kroužky ze silikonu (3 kusy). Materiál: pyrofylit „označení materiálu LAVA“.
Electrodes CUCRZR pour soudure par résistance présentées sous différents diamètres ou formes en fonction des applications de soudure. Les électrodes sont en contact avec les éléments à souder par résistance. Elles sont montées sur une tête ou un outillage à mains qui est relié à un générateur de courant (non repris dans ce RTC). Composition : Cuivre 99,11% Chrome 0,75% Zirconium 0,09%
Dle deklarovaných údajů se jedná o strojní adaptér, který je součástí plazmového hořáku. Adaptér plazmového hořáku slouží k upevnění plazmové kabeláže z pravé strany a těla hořáku ze strany levé. Další funkcí výrobku je přívod chladiva, řezacích plynů a řezacího proudu do těla hořáku. Chladivo je vedeno kabeláží a samotnou konstrukcí adaptéru. Řezací proud je přenášen pomocí závitového spojení s plazmovou kabeláží z jedné strany, a pomocí pružné lamely, která je umístěna v těle adaptéru ze strany druhé. Adaptér je vyroben z více materiálů, včetně plastů s vysokou teplotní odolností a velkou elektrickou pevností (až 400 A řezacího proudu; vysokonapěťový pulz pro zápal 10 000 – 18 000 V).
Dle deklarovaných údajů se jedná o měděnou trysku sloužící k vytvoření plazmového oblouku mezi vnitřním tvarem trysky a čelem elektrody. Dochází k přeskoku el. proudu a za pomocí ionizovaného plynu a k následnému vytvoření plazmového oblouku, který je pomocí otvoru v trysce fokusován do úzkého paprsku o vysoké výstupní rychlosti. Tryska je svou konstrukcí určena pouze pro plazmové řezání.
Dle deklarovaných údajů a předložené dokumentace se jedná o vnitřní krytku plazmového hořáku. Výrobek slouží k utažení trysky k hořáku a uzavírá chladící okruh. Spolu s tryskou tvoří kladný pól v plazmovém hořáku. Materiál: měď, „Vespel“.
Dle deklarovaných údajů a předložené dokumentace se jedná o součást stroje na řezání kovů plazmovým obloukem - nespotřebovávající se kontaktní kovovou elektrodu s vyšší životností, určenou pro plazmový hořák (trysku). Elektroda slouží k přenosu plazmového oblouku na řezaný materiál. Z jedné strany je opatřena závitem k uchycení do hořáku, z druhé strany je ve stříbrném středu trysky emisní hafniová vložka s vysokou teplotní odolností, mezi níž a materiálem plazmový oblouk vzniká. Materiál: měď, stříbro, hafnium.
Dle deklarovaných údajů a předložené dokumentace se jedná o součást stroje na řezání kovů plazmovým obloukem - nespotřebovávající se kontaktní měděnou elektrodu pro plazmový hořák (trysku). Elektroda slouží k přenosu plazmového oblouku na řezaný materiál. Z jedné strany je opatřena závitem k uchycení do hořáku, z druhé strany je ve středu emisní hafniová vložka (pin) s vysokou teplotní odolností, mezi níž a materiálem plazmový oblouk vzniká. Materiál: měď, hafnium.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) I) Löt- und Schweißmaschinen, -apparate und -geräte Zu dieser Gruppe gehören bestimmte Löt- und Schweißmaschinen, -apparate und -geräte, tragbar oder ortsfest. Sie gehören auch dann hierher, wenn sie Schneidarbeiten ausführen können. Die Schweißarbeiten können manuell, voll- oder halbautomatisch ausgeführt werden. Hierzu gehören: A) Maschinen und Geräte zum Hart- oder Weichlöten Die Wärme wird hierbei in der Regel konduktiv oder induktiv unter Verwendung einer elektrischen Stromquelle erzeugt. Das Zusatzmetall wird gewöhnlich zwischen den Oberflächen der Verbindung durch Kapillarwirkung verteilt. „Hartlöten“ kann von „Weichlöten“ anhand der Schmelztemperatur der verwendeten Lote unterschieden werden. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2021/600 der Kommission vom 7. April 2021 (ABl. EU Nr. L 127/26) (RV L 21/600) Stäbe aus Wolframlegierung mit einem Wolframgehalt von mehr als 94 GHT und einem Lanthangehalt von 1,5 GHT, mit einer Länge von 150 mm und einem Durchmesser von 3 mm. Die Stäbe sind nicht nur durch Sintern hergestellt, nicht mit Dekapier- oder Flussmittel umhüllt oder gefüllt. Sie haben stumpfe Enden (d. h. keine Spitzen) und sind einzeln farblich markiert. Die Farbmarkierung verweist auf das Legierungselement und den Wolframgehalt. Die Stäbe sind in Chargen abgepackt. Die Stäbe sind zum Anschleifen bestimmt und dienen als Schweißelektroden für das WIG- Schweißen (Wolfram-Inertgas-Schweißen). Bei diesem Schweißverfahren dient die Elektrode dazu, den Lichtbogen zwischen Elektrode und Werkstück zu bilden. …
1. Zu Kapitel 85 gehören nicht: a) Bettdecken, Heizkissen, Fußwärmer und ähnliche Gegenstände, mit elektrischer Heizvorrichtung; Kleidung, Schuhe, Ohrenschützer und andere am Körper zu tragende Gegenstände, mit elektrischer Heizvorrichtung (RV E8501A00); b) Glaswaren der Position 7011 (RV E8501B00); c) Maschinen, Apparate und Geräte der Position 8486 (RV E8501C00); d) Staubsauger von der für medizinische, chirurgische, zahnärztliche oder tierärztliche Zwecke verwendeten Art (Position 9018) (RV E8501D00); oder e) elektrisch beheizte Möbel des Kapitels 94 (RV E8501E00). 2. Waren, die sowohl den Positionen 8501 bis 8504 als auch der Position 8511, 8512, 8540, 8541 oder 8542 zugewiesen werden können, sind in eine der fünf zuletzt genannten Positionen einzureihen (RV E8502100). Quecksilberdampfgleichrichter mit Metallgefäß gehören jedoch zu Position 8504 (RV E8502200). 3. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
- 8515.90.80.40Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
- 8515.90.80.90Other
Frequently asked questions
What does customs tariff code 8515.90.80 cover?
Code 8515.90.80 covers Parts, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8515.90.80?
The third-country duty rate for 8515.90.80 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8515.90.80?
The first six digits form the HS code: 851590. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8515.90.80 have?
8515.90.80 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8515.90.80 sit in the tariff?
8515.90.80 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8515 Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets > 851590 Parts. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8515.90.80?
Yes. The EBTI database holds decisions on 8515.90.80, for example DEBTI27087/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8515.90.80 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8515.90.80 to 1B002, 1B003, 1B102, 6A005, 9B004. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8515.90.80 change?
8515.90.80 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.