Customs tariff code

Customs tariff code 8534.00.11: Multilayer circuits

Reference data as at 1 July 2026

Customs tariff code 8534.00.11 covers Multilayer circuits. The third-country duty rate is 0 %, plus import VAT.

8534.00.11 is CN code in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.

This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.

Customs code
8534.00.11
Third-country duty
0 %
Declarable
No
Binding rulings
8

Where this code sits in the tariff

  1. 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
  2. 8534Printed circuits
  3. 8534.00Gedruckte Schaltungen
  4. 8534.00.11Multilayer circuits

From HS code to customs tariff code 8534.00.11

HS code8534.006 digits, uniform worldwide
CN code8534.00.118 digits, EU Combined Nomenclature

Duty rates and preferences

OriginDuty rateBasis
Third-country duty0 %MFN
Switzerland0 %Tariff preference
Faroe Islands0 %Tariff preference
Melilla0 %Tariff preference
Occupied palestinian Territory0 %Tariff preference
Türkiye0 %Customs Union Duty
San Marino0 %Customs Union Duty
Andorra0 %Customs Union Duty
EU-Switzerland agreement: re-imported goods0 %Tariff preference
GSP-EBA (Special arrangement for the least-developed countries…0 %Tariff preference
GSP+ (incentive arrangement for sustainable development and…0 %Tariff preference
Moldova, Republic of0 %Tariff preference
Ecuador0 %Tariff preference

Rates from the EU TARIC database. Preferential rates require valid proof of origin.

Compliance regimes on this code

Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.

Possible dual-use control codes

Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.

  • 3A234Striplines to provide low inductance path to detonators with the following characteristics:

Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.

Binding tariff information for this code

DEBTI19701/26-1Issued by DEValid until 2029-07-05

Leiterplatte (Abbildung siehe Anlage) - aus einem isolierenden Kunststoffträger (FR4) in Form einer Mehrlagenschaltung (sog. Multilayer) mit im Druckverfahren aufgebrachten Leiterbahnen und Kontakten. "Gedruckte Schaltung, nur mit Leiterbahnen oder Kontakten, Mehrlagenschaltung"

DEBTI19700/26-1Issued by DEValid until 2029-07-05

Leiterplatte (Abbildung siehe Anlage) - aus einem isolierenden Kunststoffträger in Form einer Mehrlagenschaltung (sog. Multilayer) mit im Druckverfahren aufgebrachten Leiterbahnen und Kontakten, - vier davon auf einem gemeinsamen Nutzen (Abmessungen ca. 233 , 4 x 160 mm), noch nicht vereinzelt. "Gedruckte Schaltung, nur mit Leiterbahnen oder Kontakten, Mehrlagenschaltung, unfertig"

ROBTI2025/004928Issued by ROValid until 2028-05-08

Conform descrierii solicitantului si a imaginii publicate in baza de date, produsul reprezinta o placa de circuite imprimate multiple, cu forma specifica, care nu este echipata cu elemente electronice active sau pasive. Placa contine, pe ambele parti, circuite conductoare si contacte; placa este multistrat. Dimensiuni aproximative: 260 x 307 mm. Se prezinta pe un panou in numar de opt seturi de placi si sunt ambalate in pungi vidate si in cutii de carton.

DEBTI1066/24-1Issued by DEValid until 2027-10-03

Leiterplatte ALP811.001 (70.1183.162-00), - aus einem isolierenden Kunststoffträger in Form einer mehrlagigen gedruckten Schaltung mit im Druckverfahren aufgebrachten Leiterbahnen und Kontakten sowie nicht gedruckten Anschlussstücken. "Gedruckte Schaltung, nur mit Leiterbahnen oder Kontakten, Mehrlagenschaltung"

DEBTI12978/24-1Issued by DEValid until 2027-05-16

Leiterplatte, - mit einem isolierenden Kunststoff-Träger (FR4), in Form einer Mehrlagenschaltung mit im Druckverfahren aufgebrachten Leiterbahnen und Kontakten. "Gedruckte Schaltung, nur mit Leiterbahnen oder Kontakten, Mehrlagenschaltung"

FRBTIFR-BTI-2024-00920Issued by FRValid until 2027-03-10

Carte de connexion en cuivre, utilisée pour la fabrication de faisceaux électriques destinés pour des solutions industrielles et mécatroniques. Il s'agit d'un circuit imprimé multicouche ne comportant que des éléments conducteurs et des contacts. L’article ne comporte pas d’éléments actifs ni passifs. Caractéristiques des composants : - Résine époxyde et fibre de verre, doublée d'une fine couche de cuivre d'un ou des deux côtés et recouverte d'un vernis photosensible.

DEBTI13572/23-1Issued by DEValid until 2026-05-14

Mehrlagenschaltung mit Leiterbahnen und Kontakten (Abbildung siehe Anlage), - mit einem isolierenden Träger in Form einer Mehrlagenschaltung (Abmessungen: 80 x 53 mm - 181 x 181 mm; Materialstärke: 1,2 mm - 2,0 mm) mit im Druckverfahren aufgebrachten Leiterbahnen und Kontakten. "Gedruckte Schaltung, nur mit Leiterbahnen oder Kontakten, Mehrlagenschaltung"

FRBTIFR-BTI-2022-03805Issued by FRValid until 2025-07-18

Cartes de circuits imprimés nues, multicouches, ne comportant pas d’éléments actifs ni passifs, destinées à l’industrie électronique.

Notes that govern this classification

Pos. 8534

Erläuterungen zur Kombinierten Nomenklatur (KN) Hierher gehören: 1. Papieretiketten in Form einer gedruckten Schaltung, die z. B. in Bibliotheksbüchern verwendet werden, um sie vor Diebstahl zu schützen; 2. flexible elektrische Leiter in Form von gedruckten Schaltungen.

Pos. 8534

Erläuterungen zum Harmonisierten System (HS) Gemäß Anmerkung 8 zu Kapitel 85 gehören zu dieser Position Schaltungen, bei deren Herstellung auf einem isolierenden Träger durch ein beliebiges Druckverfahren (Drucken im eigentlichen Sinne, Einprägen, Elektroplattieren, Ätzen usw.) Leiterbahnen, Kontakte oder andere aufgedruckte Elemente wie Induktionsspulen, Widerstände und Kondensatoren („passive“ Elemente) angebracht werden, nicht jedoch Bauelemente, die ein elektrisches Signal erzeugen, umformen, demodulieren, verändern oder verstärken können, wie Dioden, Trioden oder andere „aktive“ Elemente. Manche Grundschaltungen oder „ungeschaltete“ Leiterplatten bestehen nur aus gedruckten Leiterbahnen aus im Allgemeinen dünnen einheitlichen Streifen oder Bändern und ggf. Verbindungs- oder Kontaktvorrichtungen. …

Kapitel 85

1. Zu Kapitel 85 gehören nicht: a) Bettdecken, Heizkissen, Fußwärmer und ähnliche Gegenstände, mit elektrischer Heizvorrichtung; Kleidung, Schuhe, Ohrenschützer und andere am Körper zu tragende Gegenstände, mit elektrischer Heizvorrichtung (RV E8501A00); b) Glaswaren der Position 7011 (RV E8501B00); c) Maschinen, Apparate und Geräte der Position 8486 (RV E8501C00); d) Staubsauger von der für medizinische, chirurgische, zahnärztliche oder tierärztliche Zwecke verwendeten Art (Position 9018) (RV E8501D00); oder e) elektrisch beheizte Möbel des Kapitels 94 (RV E8501E00). 2. Waren, die sowohl den Positionen 8501 bis 8504 als auch der Position 8511, 8512, 8540, 8541 oder 8542 zugewiesen werden können, sind in eine der fünf zuletzt genannten Positionen einzureihen (RV E8502100). Quecksilberdampfgleichrichter mit Metallgefäß gehören jedoch zu Position 8504 (RV E8502200). 3. …

Abschnitt XVI

1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …

Subdivisions of this code

Frequently asked questions

What does customs tariff code 8534.00.11 cover?

Code 8534.00.11 covers Multilayer circuits. Classification turns on the material, function, and intended use of the goods, not on their trade name.

What is the duty rate for 8534.00.11?

The third-country duty rate for 8534.00.11 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.

What is the HS code for 8534.00.11?

The first six digits form the HS code: 853400. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.

How many digits does 8534.00.11 have?

8534.00.11 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.

Where does 8534.00.11 sit in the tariff?

8534.00.11 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8534 Printed circuits > 853400 Gedruckte Schaltungen. The parent headings and their notes help decide whether the classification holds.

Is there binding tariff information for 8534.00.11?

Yes. The EBTI database holds decisions on 8534.00.11, for example DEBTI19701/26-1. A BTI shows which product characteristics the customs authority relied on.

What happens if the customs tariff code is wrong?

An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.

Is 8534.00.11 a dual-use item?

The customs code alone does not decide that. An indicative correlation links 8534.00.11 to 3A234. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.

Does customs tariff code 8534.00.11 change?

8534.00.11 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.

Read more on classification

Classifying more than one product?

This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.