Customs tariff code 8541.90.00.00: Parts
Reference data as at 1 July 2026
Customs tariff code 8541.90.00.00 covers Parts. The third-country duty rate is 0 %, plus import VAT.
8541.90.00.00 is TARIC code in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8541.90.00.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 85ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
- 8541Semiconductor devices (for example, diodes, transistors, semiconductor-based transducers); photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes (LED), whether or not assembled with other light-emitting diodes (LED); mounted piezo-electric crystals
- 8541.90Parts
- 8541.90.00.00Parts
From HS code to customs tariff code 8541.90.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 3A001hElectronic items as follows:
- 3A501Electronic items as follows:
- 3C005High resistivity materials as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Cadre en alliage d’aluminium pour module photovoltaïque, destiné à entourer, rigidifier et protéger le module photovoltaïque. Il permet de maintenir le verre et le laminé en place et permet la fixation mécanique du module sur la structure de montage composée de rails, crochets etc, (non reprise dans ce RTC). Le cadre est constitué de profils creux en alliage d’aluminium obtenus par extrusion puis usinage qui présentent une surface anodisée, coupés à longueur puis assemblés en cadre rectangulaire au moyen d’équerres de coin. La hauteur du cadre est comprise entre 30 et 35 mm. La largeur des profils est d’environ 33 mm pour le côté long et 18 mm pour le côté court.
Rahmen für Fotovoltaik-Module, - aus vier spezifisch nach Maßzeichnung gefertigten profilierten Seitenteilen aus Aluminium (zwei Längsprofile, Länge 1650 bis 1980 mm, und zwei Querprofile, Länge 970 bis 1150 mm), sowie vier spezifisch nach Maßzeichnung gefertigten Eckverbindern aus Aluminium mit innenliegenden Materialwülsten zur Verbindung der Seitenteile durch Einpressverbindung, - noch nicht zusammengesetzt, - erkennbar ausschließlich als Rahmen zur Aufnahme und Befestigung von Fotovoltaikmodulen der Position 8541 bestimmt. "Teil, erkennbar ausschließlich für lichtempfindliche Halbleiterbauelemente (fotovoltaische Zellen, zu Modulen zusammengesetzt) bestimmt, noch nicht zusammengesetzt"
Photodioden-Kappe, - aus einem annähernd zylinderförmigen Ziehteil aus Kovar (NiCo2918) (max. Durchmesser ca. 9,1 mm, Höhe ca. 3,7 mm), mit einer runden Aussparung an der Oberseite, - nach Zeichnung gefertigt und als Gehäuseteil für lichtempfindliche Halbleiterbauelemente (diskrete Photodioden) bestimmt. "Teil, erkennbar ausschließlich oder hauptsächlich für Halbleiterbauelemente der Position 8541 bestimmt"
Secondo le informazioni fornite, la merce consiste in profili in alluminio per pannelli fotovoltaici. La merce, secondo quanto dichiarato in domanda, è appositamente progettata per contenere un modulo fotovoltaico. Si tratta di kit composti da due profili lunghi, due profili corti e corner keys, già integrate nella short frame, che, una volta fissate al profilo corto tramite un sistema specifico di pressatura e punzonatura, garantiscono un assemblaggio solido e automatizzato tra i due profili. Questi elementi sono progettati appositamente per l’applicazione fotovoltaica, con dimensioni precise per l’inserimento di un vetro, adattato alla cavità di laminazione per ospitare il modulo fotovoltaico, mentre la presenza dei fori di dimensione e posizione prestabilita assicurano il corretto deflusso dell’acqua evitandone il ristagno. Le caratteristiche specifiche e personalizzate sopra indicate rendono il prodotto ad uso esclusivo per l'applicazione dei moduli fotovoltaici.
Parties de panneaux solaires, se présentant sous la forme de profilés aluminium anodisés, gris ou noirs, d’une longueur maximale de 1.5m, avec équerres pré-insérées fixées par emboîtage élastique irréversible. Ils sont utilisés comme côtés courts d’un cadre pour panneaux photovoltaïques. Composition : Alliage d’aluminium 6005. Traitement thermique T6. Anodisation AA15 (15µm) grise ou AA20 (20µm) noire.
Parties de panneaux solaires, se présentant sous la forme de profilés aluminium anodisés, gris ou noirs, d’une longueur maximale de 2.5m. Ils sont utilisés comme côtés longs d’un cadre pour panneaux photovoltaïques. Composition : Alliage d’aluminium 6005. Traitement thermique T6. Anodisation AA15 (15µm) grise ou AA20 (20µm) noire.
Rahmen für Fotovoltaik-Module, - aus vier spezifisch nach Maßzeichnung gefertigten profilierten Seitenteilen aus Aluminium (zwei Längsprofile, Länge 1742, und zwei Querprofile, Länge 1134 mm), mit Befestigungsbohrungen und Potentialausgleichsanschluss sowie vier spezifisch nach Maßzeichnung gefertigten Eckverbindern aus Aluminium mit innenliegenden Materialwülsten zur Verbindung der Seitenteile durch Einpressverbindung, - noch nicht zusammengesetzt, - erkennbar ausschließlich als Rahmen zur Aufnahme und Befestigung von Fotovoltaik- module bestimmt. "Teil, erkennbar ausschließlich für lichtempfindliche Halbleiterbauelemente (fotovoltaische Zellen, zu Modulen zusammengesetzt) bestimmt, noch nicht zusammengesetzt - Rahmen für Fotovoltaik-Module"
Rahmen für Fotovoltaik-Module, - aus vier spezifisch nach Maßzeichnung gefertigten profilierten Seitenteilen aus Aluminium (zwei Längsprofile, Länge 1670 bzw. 1790 mm, und zwei Querprofile, Länge 1006 bzw. 1060 mm), mit Befestigungsbohrungen und Potentialausgleichsanschluss sowie vier spezifisch nach Maßzeichnung gefertigten Eckverbindern aus Aluminium mit innenliegenden Materialwülsten zur Verbindung der Seitenteile durch Einpressverbindung, - noch nicht zusammengesetzt, - erkennbar ausschließlich als Rahmen zur Aufnahme und Befestigung von Fotovoltaikmodulen bestimmt. "Teil, erkennbar ausschließlich für lichtempfindliche Halbleiterbauelemente (Fotoelemente, zu Modulen zusammengesetzt) bestimmt, noch nicht zusammengesetzt - Rahmen für Fotovoltaik-Module"
Notes that govern this classification
Zu Unterposition 8541 90 00: Neben den in den Erläuterungen zu Pos. 8541 des HS aufgeführten Teilen gehören z. B. hierher: 1. Halterungen und Gehäuse für piezoelektrische Kristalle; 2. Gehäuse aus Metall, Steatit usw., für montierte Halbleiter. Nicht hierher gehören z. B.: a) Stromzuführungen, die den Strom von den Kontaktstiften zu den Elektroden führen (Pos. 8536); b) Teile aus Grafit (Unterposition 8545 90 90). (1) Anmerkung: ab 1.1.2022 zutreffender KN-Code: 8541 43 00
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) Nr. 1037/2014 der Kommission vom 25. September 2014 (ABl. EU Nr. L 287/9) (RV L 1037/14): 1. Eine Halbleiterkomponente (so genanntes „LED- Modul“), bestehend aus einem LED-Chip und einer parallel geschalteten Zener-Schutzdiode in einem Kunststoffgehäuse mit kuppelförmiger, transparenter Kunststoffabdeckung, mit Abmessungen von etwa 7 × 7 × 5 mm, ohne Anschlusspads. Die Komponente ist insofern untrennbar, als einige Bestandteile zwar theoretisch entfernt und ersetzt werden können, dies aber zeitaufwendig und schwierig ist und daher unter normalen Herstellungsbedingungen unwirtschaftlich wäre. Das LED-Modul ist so konzipiert, dass es auf Leiterplatten montiert werden kann, etwa durch Löttechniken zur Oberflächenmontage (SMD). …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Urteil des EuGH vom 2. Oktober 2008 in der Rechtssache C-411/07: Einreihung von lichtempfindlichen Halbleiterbauelementen (Optokopplern) in die Kombinierte Nomenklatur Die Kombinierte Nomenklatur in Anhang I der Verordnung (EWG) Nr. 2658/87 des Rates vom 23. Juli 1987 über die zolltarifliche und statistische Nomenklatur sowie den Gemeinsamen Zolltarif in der durch die Verordnung (EG) Nr. 1832/2002 der Kommission vom 1. August 2002 geänderten Fassung ist dahin auszulegen, dass ein Optokoppler unabhängig davon, ob er eine Verstärkerschaltung enthält oder nicht, Position 8541 zuzuweisen ist. Gerichtliche Entscheidungen (GE)
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgerichts Hamburg vom 18.07.2014 - Az.: 4 K 3/13, Leitsatz Zu den Merkmalen eines Lasers der Warennummer 9013 (Rn.45) (Rn.47) (Rn.49). Orientierungssatz 1. Zum LS: Laserdioden im Sinne der Kombinierten Nomenklatur sind nur die diskreten Bauelemente selbst, so dass es einer Einreihung der Apparate als Laser der Pos. 9013 KN nicht entgegensteht, dass in ihnen Laserdioden verbaut sind (Rn.48). 2. Nichtzulassungsbeschwerde eingelegt (Az. des BFH: VII B 145/14). 3. Die Nichtzulassungsbeschwerde wurde als unbegründet zurückgewiesen (BFH-Beschluss vom 21.10.2015 VII B 145/14). Auszug aus dem Urteil des Bundesfinanzhofs vom 15. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8541.90.00.00 cover?
Code 8541.90.00.00 covers Parts. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8541.90.00.00?
The third-country duty rate for 8541.90.00.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8541.90.00.00?
The first six digits form the HS code: 854190. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8541.90.00.00 have?
8541.90.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8541.90.00.00 sit in the tariff?
8541.90.00.00 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8541 Semiconductor devices (for example, diodes, transistors, semiconductor-based transducers); photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes (LED), whether or not assembled with other light-emitting diodes (LED); mounted piezo-electric crystals > 854190 Parts. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8541.90.00.00?
Yes. The EBTI database holds decisions on 8541.90.00.00, for example FRBTIFR-BTI-2025-08199. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8541.90.00.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8541.90.00.00 to 3A001h, 3A501, 3C005. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8541.90.00.00 change?
8541.90.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.