Customs tariff code 8708.50.20.70.0: Gehäuse für Innengelenk von Gelenkwellen (Tripoden-Gelenkgehäuse) zur Übertragung eines…
Reference data as at 24 July 2026
Customs tariff code 8708.50.20.70.0 covers Gehäuse für Innengelenk von Gelenkwellen (Tripoden-Gelenkgehäuse) zur Übertragung eines Drehmoments von Motor und Getriebe auf die Räder eines Kraftfahrzeugs, mit, einem Außendurchmesser von 67,0 mm oder mehr, jedoch nicht mehr als 84,5 mm,, 3 kalt kalibrierten Laufrillen mit einem Durchmesser von 29,90 mm oder mehr, jedoch nicht mehr als 36,60 mm,, einem Dichtungsdurchmesser von 34,0 mm oder mehr, jedoch nicht mehr als 41,0 mm, ohne Steigungswinkel,, einer Zahnwelle mit 21 Zähnen oder mehr, jedoch nicht mehr als 35,, einem Durchmesser des Lagersitzes von 25,0 mm oder mehr, jedoch nicht mehr als 30,0 mm, auch mit Ölnuten. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
8708.50.20.70.0 is national commodity code in the EU customs tariff, in chapter 87. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8708.50.20.70.0
- Third-country duty
- See subdivision
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 87VEHICLES OTHER THAN RAILWAY OR TRAMWAY ROLLING STOCK, AND PARTS AND ACCESSORIES THEREOF
- 8708Parts and accessories of the motor vehicles of headings 8701 to 8705
- 8708.50Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
- 8708.50.20For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705
- 8708.50.20.70Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
- 8708.50.20.70.0Gehäuse für Innengelenk von Gelenkwellen (Tripoden-Gelenkgehäuse) zur Übertragung eines Drehmoments von Motor und Getriebe auf die Räder eines Kraftfahrzeugs, mit, einem Außendurchmesser von 67,0 mm oder mehr, jedoch nicht mehr als 84,5 mm,, 3 kalt kalibrierten Laufrillen mit einem Durchmesser von 29,90 mm oder mehr, jedoch nicht mehr als 36,60 mm,, einem Dichtungsdurchmesser von 34,0 mm oder mehr, jedoch nicht mehr als 41,0 mm, ohne Steigungswinkel,, einer Zahnwelle mit 21 Zähnen oder mehr, jedoch nicht mehr als 35,, einem Durchmesser des Lagersitzes von 25,0 mm oder mehr, jedoch nicht mehr als 30,0 mm, auch mit Ölnuten
From HS code to customs tariff code 8708.50.20.70.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Unterposition 8708 50: 1. Angeflanschte Kegelrollenradlagereinheit für Innenring-Rotation, auch als "Kegelrollenradlagereinheit der zweiten Generation" bezeichnet, mit doppelten Rollenreihen, bestehend aus (i) zwei Stahlinnenringen (Innendurchmesser: 54 mm), (ii) einem Stahlaußenring mit integriertem Flansch (Außendurchmesser: 96 mm, Flanschdurchmesser 159 mm), (iii) 40 Stahlrollen (20 Stück x 2 Reihen), (iv) zwei Kunststoffkäfigen und (v) zwei Gummidichtungen. Der angeflanschte Außenring hat Gewindebohrungen für Schrauben, um eine Befestigung an der Karosserie eines Kraftfahrzeugs zu ermöglichen. Dieses Produkt ist für die Montage an der Karosserie eines Kraftfahrzeugs mit dem angeflanschten Außenring (ii) vorgesehen. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 902/96 1) zur Kommission vom 20. Mai 1996 (RV L 902/96): 1. Kupplungsausrücker mit nur einer Raststellung für Schaltkupplungen von Kraftfahrzeugen in Leichtbauweise, mit einer Führungshülse aus Stahlblech mit integriertem Druckkugellager und äußerem Stahlblechgehäuse, auch mit angesetzten Federstahlplättchen, Schnappverbindungen oder Ausrückbolzen aus Metall versehen. Unterposition 8708 9310 und 8708 93 90 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie dem Wortlaut der KN-Codes 8708, 8708 93 und 8708 93 10 (für die industrielle Montage) oder 8708 93 90. (entfallen) 2. …
Gerichtliche Entscheidungen (GE) - national Auszug aus dem Urteil des Finanzgericht Rheinland Pfalz vom 18. März 2004 Az.: 6 K 2453/02 Z Tatbestand: Streitig ist, ob die mit der verbindlichen Zolltarifauskunft vom … vorgenommene Einreihung eines elektrischen Sonnenschutzrollos in die Zollnomenklatur zutreffend ist. Die Klägerin beantragte am … bei der Zolltechnischen Prüfungs- und Lehranstalt (ZPLA) der Oberfinanzdirektion Frankfurt - jetzt Koblenz - die Erteilung einer verbindlichen Zolltarifauskunft (vZTA) über eine als „Elektrisches Sonnenrollo zum Einbau unter der Hutablage für Kraftfahrzeuge“ bezeichnete Ware. Die ZPLA erteilte am … die vZTA Nr. …, in der die Ware als „Innenrollo, sog. elektrisches Sonnenschutzrollo“ der Codenummer 6303 12 00 der Kombinierten Nomenklatur (KN) zugewiesen wurde. …
Nationale Entscheidungen und Hinweise (NEH) Nicht zu dieser Position gehören Abschleppseile für Kraftfahrzeuge aller Art, wie sie in den Erläuterungen zur Position 5609 in Randzahl 01.0 des Teils Nationale Entscheidungen und Hinweise beschrieben sind. Zu den Unterpositionen 8708 95 10 bis 8708 99 97 gehören nicht Airbags, die in Kraftfahrzeugsitze eingebaut werden (Unterposition 9401 90). Airbags mit Aufblasvorrichtung für Fahrzeuge sind unabhängig davon, ob sie in Lenkräder, Armaturenbretter, Seitenverkleidungen von Fahrzeugen, den Dachhimmel von Fahrzeugen eingebaut werden, als Teile für Kraftfahrzeuge zu betrachten. Airbags ohne Aufblasvorrichtung (Airbagsäcke, Fangbänder für Airbags etc.) sind ebenfalls als Teile für Kraftfahrzeuge einzureihen (siehe Wortlaut der Unterposition 8708 95 und Erläuterungen zum Harmonisierten System zu Position 8708 Buchstabe O)). …
Frequently asked questions
What does customs tariff code 8708.50.20.70.0 cover?
Code 8708.50.20.70.0 covers Gehäuse für Innengelenk von Gelenkwellen (Tripoden-Gelenkgehäuse) zur Übertragung eines Drehmoments von Motor und Getriebe auf die Räder eines Kraftfahrzeugs, mit, einem Außendurchmesser von 67,0 mm oder mehr, jedoch nicht mehr als 84,5 mm,, 3 kalt kalibrierten Laufrillen mit einem Durchmesser von 29,90 mm oder mehr, jedoch nicht mehr als 36,60 mm,, einem Dichtungsdurchmesser von 34,0 mm oder mehr, jedoch nicht mehr als 41,0 mm, ohne Steigungswinkel,, einer Zahnwelle mit 21 Zähnen oder mehr, jedoch nicht mehr als 35,, einem Durchmesser des Lagersitzes von 25,0 mm oder mehr, jedoch nicht mehr als 30,0 mm, auch mit Ölnuten. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8708.50.20.70.0?
TARIC holds no third-country rate of its own for 8708.50.20.70.0. The rate follows from the declarable commodity code beneath it.
What is the HS code for 8708.50.20.70.0?
The first six digits form the HS code: 870850. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8708.50.20.70.0 have?
8708.50.20.70.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 8708.50.20.70.0 sit in the tariff?
8708.50.20.70.0 sits in this hierarchy: 87 VEHICLES OTHER THAN RAILWAY OR TRAMWAY ROLLING STOCK, AND PARTS AND ACCESSORIES THEREOF > 8708 Parts and accessories of the motor vehicles of headings 8701 to 8705 > 870850 Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof > 87085020 For the industrial assembly of: Vehicles of heading 8703; Vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm$3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm$3; Vehicles of heading 8705 > 8708502070 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8708.50.20.70.0?
The EBTI database currently holds no valid decisions on 8708.50.20.70.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8708.50.20.70.0 change?
8708.50.20.70.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.