Customs tariff code 9306.30.10: For revolvers and pistols of heading 9302 and for sub-machine-guns of heading 9301
Reference data as at 1 July 2026
Customs tariff code 9306.30.10 covers For revolvers and pistols of heading 9302 and for sub-machine-guns of heading 9301. The third-country duty rate is 2.7 %, plus import VAT.
9306.30.10 is CN code in the EU customs tariff, in chapter 93. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 9306.30.10
- Third-country duty
- 2.7 %
- Declarable
- No
- Binding rulings
- 5
Where this code sits in the tariff
- 93ARMS AND AMMUNITION; PARTS AND ACCESSORIES THEREOF
- 9306Bombs, grenades, torpedoes, mines, missiles and similar munitions of war and parts thereof; cartridges and other ammunition and projectiles and parts thereof, including shot and cartridge wads
- 9306.30Other cartridges and parts thereof
- 9306.30.10For revolvers and pistols of heading 9302 and for sub-machine-guns of heading 9301
From HS code to customs tariff code 9306.30.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 2.7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 0003Weapons / munitions / military material (Ausfuhrliste Teil I A)
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
L'article est un culot de cartouche en acier inoxydable, de couleur gris brillant. L'article est destiné à être assemblé pour devenir une cartouche 5.56 Inox 1.4005 (416SS) Procédé de fabrication: usinage,tournage, décolletage et traitement thermique. Diamètre: 10 mm. Longueur: 5.26 mm Emballage en vrac dans un sachet plastique et carton.
Manevrsko, šolsko in neubojno vadbeno strelivo različnih kalibrov: - 5,56 x 45 mm; - 9 x 19 mm; - 7,62 x 39 mm; - 7,62 x 51 mm; - 12,7 x 99 mm. Uporablja se z revolverji, pištolami in avtomatskimi ali polavtomatskimi puškami za profesionalno usposabljanje vojaških in varnostnih sil. Tulec ima vžigalno kapico, smodniško polnjenje in gumijasto ali z barvo napolnjeno kroglo. Lahko je tudi brez krogle.
Dle deklarovaných údajů se jedná o výcvikové střelivo ráže 9 mm pro pistole a samopalné zbraně. Jedná se o značkovací cvičné náboje, určené ke střelbě v prostorách mimo střelnice. Náboje FX jsou tvořeny velmi lehkou plastovou střelou a speciálně řešenou teleskopickou nábojnicí, která umožňuje zajistit při výstřelu samonabíjecí funkci zbraně. Tento systém umožňuje bezpečné vedení ostré střelby cvičnými náboji s plastovou střelou i proti osobám vybaveným nenáročnými ochrannými prostředky (simuluje výcvik skutečného střetu s ozbrojeným protivníkem). Náboje jsou určeny pouze pro potřebu výcviku státních ozbrojených složek a nejsou určeny k prodeji v maloobchodní síti. Způsob použití: - přímo ve zbrani konstruované pro tuto ráži; - s použitím adaptéru aplikovaného do stávající zbraně.
Gebrauchte, abgefeuerte, leere Messingpatronenhülsen für Pistolen und Revolver aller Kaliber (.17 - .500) = (0,17 – 0,5 Zoll). Die Ware wird lose geschüttet in Kartonagen zur Wiederbefüllung ins Drittland verbracht. (Symbolfoto siehe Anlage) „Andere Patronen und Teile davon für Revolver und Pistolen der Position 9302“.
Cartucho para pistolas constituído por un casquillo metálico, material propelente, perdigones, envoltura de lino y punta de plástico. Se utiliza para la defensa en distancias cortas y se presenta en cajas de 10 unidades.
Notes that govern this classification
Zu Unterposition 9306 30 10: Alle Patronen für die in dieser Unterposition genannten Waffen sind kurz und von gedrungener Form. Teile von Patronen sind Hülsen, auch mit Zündhütchen, Böden, Ambosse aus Messing, Kugeln usw. Hierher gehören auch Rohlinge solcher Teile.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Durchführungsverordnung (EU) 2017/1169 der Kommission vom 26. Juni 2017 (ABl. EU Nr. L 170/56) (RV L 17/1169) Eine Ware in Form eines Balls (sogenannter Paintball), bestehend aus einer harten, mit wasserbasierter Farbe gefüllten Gelatinekapsel. Die Ware ist zur Verwendung als Geschoss für ein Paintballgewehr (Luftgewehr mit einer Abschussgeschwindigkeit von 91 Metern pro Sekunde) während des Mannschaftsspiels „Paintball“ bestimmt. Siehe Abbildungen Unterposition 9306 90 90 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 1 s) 1) zu Kapitel 95 sowie nach dem Wortlaut der KN-Codes 9306, 9306 90 und 9306 90 90. …
1. Zu Kapitel 93 gehören nicht: a) Waren des Kapitels 36 (z. B. Zündhütchen, Sprengkapseln, Sprengzünder, Leuchtraketen, Raketen zum Wetterschießen) (RV E9301A00); b) Teile mit allgemeiner Verwendungsmöglichkeit im Sinne der Anmerkung 2 zu Abschnitt XV, aus unedlen Metallen (Abschnitt XV), und gleichartige Waren aus Kunststoffen (Kapitel 39) (RV E9301B00); c) Panzerwagen und andere gepanzerte Kampffahrzeuge (Position 8710) (RV E9301C00); d) Zielfernrohre und andere optische Vorrichtungen, für Waffen, ausgenommen solche, die auf Waffen montiert sind oder die mit den Waffen, für die sie bestimmt sind, gestellt werden (Kapitel 90) (RV E9301D00); e) Armbrüste, Bogen und Pfeile für den Schießsport, stumpfe Waffen für den Fechtsport und Spielzeugwaffen (Kapitel 95) (RV E9301E00); f) Sammlungsstücke oder Antiquitäten (Position 9705 oder 9706) (RV E9301F00). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 9306.30.10 cover?
Code 9306.30.10 covers For revolvers and pistols of heading 9302 and for sub-machine-guns of heading 9301. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 9306.30.10?
The third-country duty rate for 9306.30.10 is 2.7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 9306.30.10?
The first six digits form the HS code: 930630. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 9306.30.10 have?
9306.30.10 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 9306.30.10 sit in the tariff?
9306.30.10 sits in this hierarchy: 93 ARMS AND AMMUNITION; PARTS AND ACCESSORIES THEREOF > 9306 Bombs, grenades, torpedoes, mines, missiles and similar munitions of war and parts thereof; cartridges and other ammunition and projectiles and parts thereof, including shot and cartridge wads > 930630 Other cartridges and parts thereof. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 9306.30.10?
Yes. The EBTI database holds decisions on 9306.30.10, for example FRBTIFR-BTI-2025-08378. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 9306.30.10 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 9306.30.10 to 0003. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 9306.30.10 change?
9306.30.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.