Customs tariff code for Kältemittelleitung: 8415.90.00
Reference data as at 1 July 2026
Kältemittelleitung is generally classified to customs tariff code 8415.90.00: Teile.
This rests on 6 binding tariff rulings whose goods description opens with this term. 83 percent of them reached 8415.90.00.
This page answers the customs code question for Kältemittelleitung from the official decisions themselves rather than from a keyword list. It shows the classification path, the duty rate, the rulings issued for these goods, and the notes that govern them.
Your specific goods still decide the outcome. Material, function, and intended use govern the classification, so a product that differs from the cases below may belong under a different code.
- Customs code
- 8415.90.00
- Third-country duty
- See subdivision
- Rulings behind this
- 6
- Agreement
- 83 %
Binding tariff information for this code
Kältemittelleitung - aus einem spezifisch nach technischer Zeichnung gefertigten, gebogenen Aluminium- rohr mit einem Anschlussstutzen, einem Ventilstutzen mit Füllventil und Ventilkappe, einer Hülse, Dichtungen und Schutzkappen, - zum Einbau in eine Kfz-Klimaanlage zwischen Kompressor und Verdampfer zum Transport des flüssigen Kältemittels. "Teil, erkennbar ausschließlich für Klimageräte zum Ändern der Temperatur und Luftfeuchtigkeit bestimmt - sog. Kältemittelleitung für Kfz-Klimaanlage"
Kältemittelleitung - aus zwei spezifisch nach technischer Zeichnung gefertigten, durch Fassungen mit einem Schlauch verbundenen Aluminiumrohren mit Anschlussstutzen, Dichtringen, Schutzkappen, Spannstift und Schrumpfschlauch, - zum Einbau in einer Kfz-Klimaanlage zwischen Kompressor und Verdampfer zum Transport des flüssigen Kältemittels. "Teil, erkennbar ausschließlich für Klimageräte zum Ändern der Temperatur und Luftfeuchtigkeit bestimmt - sog. Kältemittelleitung"
Kältemittelleitung - aus zwei spezifisch nach technischer Zeichnung gefertigten, durch Fassungen mit einem Schlauch verbundenen Aluminiumrohren mit Anschlussstutzen, Ventilstutzen, Ventil, Füllventil, Sensor, Halter, Nippel, Buchse, Dichtringen, Schutzkappen, Ventilkappen, Spannstift, Geflechtsschlauch und Schrumpfschlauch, - zum Einbau in einer Kfz-Klimaanlage zwischen Kompressor und Verdampfer zum Transport des flüssigen Kältemittels. "Teil, erkennbar ausschließlich für Klimageräte zum Ändern der Temperatur und Luftfeuchtigkeit bestimmt - sog. Kältemittelleitung"
Kältemittelleitung - aus einer spezifisch nach technischer Zeichnung gefertigten IWT-Rohrgruppe mit zwei Rohrbogen aus Aluminium, Drehteil, Anschlussstutzen, Führungshülsen, Dichtringen, Schutzteil und Schutzkappen, - zum Einbau in einer Kfz-Klimaanlage zwischen Kompressor und Verdampfer zum Transport des flüssigen Kältemittels. "Teil, erkennbar ausschließlich für Klimageräte zum Ändern der Temperatur und Luftfeuchtigkeit bestimmt - sog. Kältemittelleitung"
Kältemittelleitung - aus einem spezifisch nach technischer Zeichnung gefertigten, gebogenen Aluminium- rohre mit Anschlussstutzen, Halter und Dichtringen, - zum Einbau in einer Kfz-Klimaanlage zwischen Kompressor und Verdampfer zum Transport des flüssigen Kältemittels. "Teil, erkennbar ausschließlich für Klimageräte zum Ändern der Temperatur und Luftfeuchtigkeit bestimmt - sog. Kältemittelleitung"
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8415Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated
- 8415.90Parts
- 8415.90.00Teile
From HS code to customs tariff code 8415.90.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Notes that govern this classification
Zu Unterposition 8415 90: Diese Unterposition erfasst sowohl Innen- als auch Außengeräte von Klimasplitgeräten der Unterposition 8415 10, wenn diese gesondert gestellt werden. Die Geräte sind dazu bestimmt, durch elektrische Leitungen und Kupferrohre, durch die ein Kühlmittel zwischen den Innen- und Außengeräten zirkuliert, verbunden zu werden.
Zu Unterposition 8415 90: 1. Innengerät für ein Kompressions-Klimasplitgerät, bestehend aus einer Verdampferschlange (Wärmeaustauscher), einem motorbetriebenen Ventilator, der die Luft über der Verdampferschlange ansaugt und sie im Raum verteilt, einem Luftfilter, einem Thermostat und einem Steuergerät, zusammen eingebaut in einem gemeinsamen Gehäuse. Das Gerät ist dazu bestimmt, mit dem Außengerät durch elektrische Leitungen und Kupferrohre, durch die das Kältemittel zirkuliert, verbunden zu werden. Anwendung der Allgemeinen Vorschriften 1 (Anmerkung 2 b) zu Abschnitt XVI) und 6. 2. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) DURCHFÜHRUNGSVERORDNUNG (EU) 2018/553 DER KOMMISSION vom 3.April 2018 (ABl. EU Nr. L 92/1) (RV L 952/13): Eine Ware, bestehend aus zwei Rohren, die durch Klammern zusammengehalten werden, mit einer Gesamtlänge von etwa 150 cm und einem Durchmesser der Rohre von jeweils etwa 0,8 cm. Es handelt sich um geschweißte Rohre aus einer Aluminiumlegierung. Die Ware ist zur Verwendung in Kraftfahrzeugen bestimmt und dient dazu, die Kühlflüssigkeit vom Motor zum Wärmetauscher unter dem Armaturenbrett des Fahrzeugs zu leiten. Unterposition: 7608 20 20 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN- Codes 7608, 7608 20 und 7608 20 20. …
Nationale Entscheidungen und Hinweise (NEH) Internationale Entscheidungen und Hinweise (IEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 220. Sitzung des Ausschusses für den Zollkodex vom 31. Mai bis 2. Juni 2021: Warenbeschreibung: Rohre, aus Aluminiumlegierung oder aus Kupfer, die für Klimaanlagen von Fahrzeugen bestimmt sind, um ein Kältemittel zu übertragen. Die fraglichen Rohre sind am Ende speziell geformt, um sie an andere Leitungen der Klimaanlage anzuschließen. Sie existieren in unterschiedlichen Längen. Einreihung: Die Waren sind in Anwendung der AV 1 und 6, Anmerkung 1 e) zu Kapitel 76 und dem Wortlaut der KN-Codes 7608, 7608 20 und 7608 20 89 in die Unterposition 7608 20 89 einzureihen. …
Subdivisions of this code
- 8415.90.00.10Of air conditioning machines of subheading Nos 8415 81, 8415 82 or 8415 83, for use in civil aircraft
- 8415.90.00.15Electrically welded manifolds for the condenser in automotive air conditioning systems: -consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding, -containing internal baffles responsible for the proper flow of coolant, -with a length of 190 mm or more, but not more than 460 mm, -with a diameter of 9 mm or more, but not more than 42 mm, -with a weight of 0,01 kg or more, but not more than 0,45 kg, -whether or not having aluminium connection blocks, used in the production of air conditioning systems in vehicles of Chapter 87
- 8415.90.00.45Aluminium connecting block for automotive air conditioning systems: -with a T6 hardening, -equipped with round stubs with a circumferential outer groove, -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, -with a distance between holes of 15 mm or more but not more than 22 mm, -with sockets designed for brazing or clamping, -with mounting holes for M6 or M8 mounting screw, threaded or not, -with a width of 5 mm or more but not more than 16 mm, -for connecting a compressor, a condenser, an evaporator, a chiller and other lines
- 8415.90.00.60Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with: -extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm, -a weight of 0,02 kg or more but not more than 0,25 kg
- 8415.90.00.91Pre-charged with hydrofluorocarbons (HFCs)
- 8415.90.00.99Other
Frequently asked questions
What is the customs tariff code for Kältemittelleitung?
In the binding tariff rulings analysed here, Kältemittelleitung is predominantly classified to 8415.90.00: Teile. For your own goods, material, function, and intended use are what decide.
What is the duty rate for Kältemittelleitung?
TARIC holds no third-country rate of its own for 8415.90.00. The rate follows from the declarable commodity code beneath it.
What is the HS code for Kältemittelleitung?
The first six digits are HS code 841590, uniform worldwide. The further digits carry the EU and national subdivisions.
What is this answer based on?
On 6 binding tariff rulings from the EBTI database whose goods description opens with this term, 83 percent of which were classified to 8415.90.00. The decisions are listed on this page with their reference and goods description.
Could a different code apply to my goods?
Yes. A binding tariff ruling binds only for the goods it was issued for and only for its holder. If your product differs in material, construction, or intended use, another code may apply. Your own BTI is what gives legal certainty in a specific case.
One product answered. What about the other thirty thousand?
Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources on every decision, compliance screening, and audit-ready reports.