Customs tariff code 3907.30.00: Epoxidharze
Reference data as at 1 July 2026
Customs tariff code 3907.30.00 covers Epoxidharze. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
3907.30.00 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3907.30.00
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3907.30.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Angaben des Antragstellers: Epoxidharz (Harz-Komponente eines 2-Komponentenharz) -Das Harz besteht aus vorpolymerisierten und monomeren Epoxidkomponenten, genaue Angaben zur Zusammensetzung liegen vor.- Feststellungen an einem Warenmuster: Niedrigviskose, semitransparente Flüssigkeit, die sich nach dem vorgelegten Datenblatt wie ein Epoxidharz (nicht ausgehärtet) verhält. Befund: Prepolymer auf Basis eines Epoxidharz in Primärform
Angaben des Antragstellers: Dicyandiamid-Paste bestehend aus Epoxidharz und Dicyandiamid, die in Epoxidharzen zur Härtung eingesetzt werden soll. Befund: Epoxidharze in Primärformen
Angaben des Antragstellers: 10:1 Epoxidharz-Kleber CMT-1 Zweikomponentenkleber (hier Binder) zur Reparatur von med. Endoskopen. Dem Binder muss eine Härterkomponente zugesetzt werden, damit er als Klebstoff verwendet werden kann. Ein Warenmuster wurde nicht vorgelegt. Die Ware wurde durch ein Datenblatt beschrieben. Daraus geht hervor, dass es sich um eine hellgelbe Flüssigkeit handelt. Zur Zusammensetzung lagen vertrauliche Informationen vor. Befund: Es liegt ein Epoxidharz vor.
Angaben: Komponente A (Kanalharz) eines lösungsmittelfreien 2-Komponenten-Reaktionskunststoffs auf Epoxidharzbasis (Komponente B ist nicht Teil dieser vZTA); zur Kanalsanierung; ein Filz- oder Glasliner wird mit dem 2-Komponenten-Material getränkt und in die defekte Abwasserleitung gezogen. Befund: Es liegt ein Epoxidharz in Primärform im Sinne der Unterposition (KN) 3907 3000 vor.
Angaben des Antragstellers: Epoxidharzsystem mit Siliciumcarbid (SiC) und anderen Zuschlagsstoffen versetzt Es wurde kein Warenmuster vorgelegt. Nach vorgelegten Lichtbildern handelt es sich bei der Ware um eine graue, pastöse Masse, die in Kunststoffbehältern gehandelt wird. Für die Ware ist der Epoxidgehalt charakterverleihend. Befund: Es liegt ein anderes Epoxidharz der Unterposition (KN) 3907 3000 vor.
Angaben des Antragstellers: Part A einer 2-Komponenten Beschichtungsfarbe -Zusammensetzung: Epoxidharz und keramische Anteile- Feststellungen an einem Warenmuster: Blaue, schimmernde, körnige Paste die an der Luft ohne Zugabe des Part B nicht aushärtet. Befund: Es liegt ein anderes Epoxidharz der Unterposition (KN) 3907 3000 vor.
Angaben des Antragstellers: Bisphenol-Harze in flüssiger Form zur Aushärtung von Bauteilen, Mustern und Formen, in Verwendung durch 3D-Drucker. Das Resin ist in unterschiedlichen Abgabemengen und Formen erhältlich. Ein Warenmuster wurde nicht vorgelegt. Gemäß beiliegendem Sicherheitsdatenblatt handelt es sich um Epoxidharze aus Bisphenol-A bzw. Bisphenol-F und Epichlorhydrin. Befund: Es liegt ein anderes Epoxidharz der Unterposition (KN) 3907 3000 vor.
Angaben des Antragstellers: Einkomponenten-Epoxy-Gießharz zur Verwendung im Elektronikbereich Zusammensetzung: Epoxidharz und Epoxidkomponenten mit 68 GHT Siliciumdioxid. Genaue Angaben zur Zusammensetzung liegen vor. Ein Warenmuster wurde nicht vorgelegt. Befund: Es liegt ein anderes Epoxidharz der Unterposition (KN) 3907 3000 vor.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören 1) Polyacetale. Dies sind Polymere, die von einem Aldehyd, normalerweise Formaldehyd, erhalten werden und durch Acetalfunktionen in der Polymerkette charakterisiert sind. Sie sind nicht mit den Polyvinylacetalen der Pos. 3905 zu verwechseln, in denen die Acetalfunktionen Substituenten an der Polymerkette sind. Diese Reihe von Kunststoffen umfasst Acetal-Copolymere, die als Kunststoffe für den technischen Bereich zum Herstellen von Kugellagerkäfigen, Nocken, Gehäusen für Kraftfahrzeuginstrumente, Türgriffen, Schaufelrädern für Pumpen und Ventilatorflügeln, Schuhabsätzen, mechanischen Spielzeugen, Fittings für Rohrleitungen usw. verwendet werden. 2) Andere Polyether. Dies sind Polymere, die aus Epoxiden, Glykolen oder ähnlichen Stoffen hergestellt wurden und sich durch Etherfunktionen in der Polymerkette kennzeichnen. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 1214/91 der Kommission vom 7. Mai 1991 (RV L 1214/91), geändert durch Verordnung (EG) Nr. 936/1999 der Kommission vom 27. April 1999 (ABl. EG Nr. L 117/9), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. Mai 2013 (ABl. EU Nr. L 130) (RV L 441/13): 2. Gesättigter Polyester, als Granulat oder wässrige Dispersion, von der in der Textilindustrie als Schlichtemittel verwendeten Art Unterposition 3907 99 901) Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 6 zu Kapitel 39 sowie nach dem Wortlaut der KN-Codes 3907 und 3907 99 901) (siehe auch die HS-Erläuterungen zu Position 3809, Ausschlussbestimmung g). …
Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung zur 193. Sitzung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Unterbereich Landwirtschaft/Chemie), 15. bis 16. Oktober 2018: Warenbeschreibung: Polydextrose – Polydextrose ist ein synthetisches, wasserlösliches Polymer, das durch Polykondensation von Glukose, Glucitol (Sorbit) und Zitronensäure hergestellt wird. Polydextrose wird in der Lebensmittelindustrie als Trägerstoff, Füllstoff oder Feuchthaltemittel Lebensmitteln zugesetzt (Zusatzstoff E 1200). Einreihung/Begründung: Polydextrose ist in die KN-Unterposition 3907 10 00 einzureihen, da die Polydextrose-Moleküle als Polyacetale anzusehen sind.
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
Subdivisions of this code
- 3907.30.00.05Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups
- 3907.30.00.08Other
- 3907.30.00.20Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups
- 3907.30.00.23Other
- 3907.30.00.40Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8504, 8533, 8535, 8536, 8541, 8542 or 8548
- 3907.30.00.70Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight: - 65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and - none or not more than 0,5 % of carbon black (CAS RN 1333-86-4)
- 3907.30.00.80Products containing more than 35 % by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), in solid, semi-solid or liquid forms, having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups
- 3907.30.00.85Other
Frequently asked questions
What does customs tariff code 3907.30.00 cover?
Code 3907.30.00 covers Epoxidharze. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3907.30.00?
TARIC holds no third-country rate of its own for 3907.30.00. The rate follows from the declarable commodity code beneath it.
What is the HS code for 3907.30.00?
The first six digits form the HS code: 390730. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3907.30.00 have?
3907.30.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3907.30.00 sit in the tariff?
3907.30.00 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms > 390730 Epoxide resins. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3907.30.00?
Yes. The EBTI database holds decisions on 3907.30.00, for example DEBTI2301/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3907.30.00 change?
3907.30.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.