Customs tariff code 3909.50: Polyurethane
Reference data as at 1 July 2026
Customs tariff code 3909.50 covers Polyurethane. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
3909.50 is HS subheading in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3909.50
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 5
Where this code sits in the tariff
From HS code to customs tariff code 3909.50
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Angaben des Antragstellers: Vorpolymerisiertes Isocyanat auf TDI-Basis -Reaktionsprodukt aus TDI (Toluoldiisocyanat) und einer hydroxylierten Komponente- Ein Warenmuster wurde nicht vorgelegt Befund: Entsprechend der vorliegenden Angaben liegt ein Prepolymer des Polyurethans der Unterposition 3909 50 vor.
Angaben des Antragstellers: Polyurethan - Gießmasse glasklar, geeignet zum Verguss in großen Dicken. Bestehend aus zwei Komponenten, flüssig im Fass, die gemischt und danach in eine Negativform vergossen werden. Ein Warenmuster wurde nicht vorgelegt. Befund: Entsprechend der vorliegenden Angaben liegt Polyurethan der Position 3909 vor.
Angaben des Antragstellers: Kombigebinde zur Herstellung eines spachtelfähigen 2-Komponenten-Polyurethanklebstoffes (siehe Abbildung). Komponente A wird mit der Komponente B in einem Mischungsverhältnis von 1 : ca. 0,13 (Gewichtsverhältnis) gemischt. Die Gebindegröße beträgt mehr als 1 kg. Die Komponente B befindet sich, getrennt von der Komponente A, im Deckel des Gebindes. Komponente A Hauptbestandteile der A-Komponente sind Kreide (etwa 60%) und ein Polyol (etwa 30%), worin die Kreide dispergiert wurde. Des Weiteren enthält die Komponente geringe Mengen von verschiedenen Additiven, eins zur besseren Vernetzung, ein weiteres zum Thixotropieren sowie ein Zeolith zum Trocknen der A-Komponente. Komponente B Sie besteht aus einem Polymeren MDl (Diphenylmethandiisocyanat). Das Polymere MDl ist eine Mischung aus reinem MDl (im Wesentlichen 2,4' - und 4,4'- Isomere) und höheren Homologen. Das Polymere MDl ist eine braune, opake Flüssigkeit. Ein Warenmuster wurde nicht vorgelegt. Befund: Entsprechend der vorliegenden Angaben liegt Polyurethan der Position 3909 vor. Eine Einreihung als Klebstoff kommt aufgrund der Gebindegröße nicht in Betracht.
Angaben des Antragstellers: Insulation Spray Ein Warenmuster wurde nicht vorgelegt. Es liegen vertrauliche Angaben zur Zusammensetzung und Aufmachung vor. Befund: Entsprechend der vorliegenden Angaben liegt Polyurethan der Position 3909 vor.
COMPRESSE STERILE IMPREGNEE D'HYDROGEL POUR BRULURES. COMPOSITION HYDROGEL: EAU, MELALEUCA, EMULSIFIANT POIDS: 270GR TAILLE: 200X450mm
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) Wegen der Einreihung von Copolymeren aus Monomeren der im Wortlaut der Position 3909 genannten Erzeugnisse und deren Gemische siehe die Anmerkung 4 zu Kapitel 39.
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören: 1) Aminoharze Diese entstehen durch Kondensation von Aminen oder Amiden mit Aldehyden (Formaldehyd, Furfuraldehyd usw.). Die wichtigsten sind Harnstoffharze (z. B. Harnstoff-Formaldehyd), Thioharnstoffharze (z. B. Thioharnstoff-Formaldehyd), Melamin-Harze (z. B. Melamin-Formaldehyd) und Anilinharze (z. B. Anilin-Formaldehyd). Diese Harze dienen zum Herstellen von transparenten oder intensiv gefärbten Kunststoffwaren; sie werden häufig durch Formen oder Gießen zu Waren für den Tischgebrauch, zu Zierartikeln oder zu elektrotechnischen Waren verarbeitet. In Lösungen und Dispersionen (Emulsionen oder Suspensionen) (auch mit Pflanzenölen, Fettsäuren, Alkoholen oder anderen Kunstharzen modifiziert) werden sie als Klebstoffe, als Textilappretur usw. verwendet (s. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EU) Nr. 2016/1645 der Kommission vom 07. September 2016 (ABl. EU Nr. L 245, S. 3): Eine Ware in Form unregelmäßiger, flacher, brauner, harter Bruchstücke (etwa 2 mm dick) oder Flocken, hergestellt aus: — etwa 58-69 GHT Kiefernharz (auch Tallharz oder Kolofonium genannt), — etwa 1-4 GHT Maleinsäureanhydrid, — etwa 11-24 GHT unterschiedliche Phenole, — etwa 5,5-9 GHT Formaldehyd, — etwa 7-12 GHT Pentaerythritol. Die Ware wird in einem mehrstufigen Verfahren hergestellt, das damit beginnt, dass Kolofonium und Maleinsäureanhydrid zu einem Kolofoniumaddukt umgewandelt werden. Durch Zugabe von Magnesiumoxid (als Katalysator für die folgenden Reaktionen), Phenolen und Formaldehyd entsteht ein polymerisiertes Harz. Schließlich werden freie Säuregruppen des Harzes nach Zugabe von Pentaerythritol verestert. …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 3909.50 cover?
Code 3909.50 covers Polyurethane. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3909.50?
TARIC holds no third-country rate of its own for 3909.50. The rate follows from the declarable commodity code beneath it.
What is the HS code for 3909.50?
The first six digits form the HS code: 390950. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3909.50 have?
3909.50 has six digits and matches the globally uniform HS subheading. A German import declaration requires the eleven-digit commodity code.
Where does 3909.50 sit in the tariff?
3909.50 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3909 Amino-resins, phenolic resins and polyurethanes, in primary forms. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3909.50?
Yes. The EBTI database holds decisions on 3909.50, for example DE13943/15-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3909.50 change?
3909.50 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.