Customs tariff code 3909.50.90: Polyurethanes, andere
Reference data as at 1 July 2026
Customs tariff code 3909.50.90 covers Polyurethanes, andere. The third-country duty rate is 6.5 %, plus import VAT.
3909.50.90 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3909.50.90
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3909.50.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C111Propellants and constituent chemicals for propellants, other than those specified in 1C011, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Angaben des Antragstellers: TPE-SEBS Compound Compound aus thermoplastischem Polyurethan und SEBS-Copolymer mit weiteren Additiven Feststellungen: Es wurde ein schwarzes, elastisches Granulat vorgelegt, das aus einer Mischung aus Polyurethan und SEBS-Copolymer besteht. Das Polyurethan überwiegt gewichtsmäßig in der Mischung. Befund: Andere Polyurethane, in Primärformen
Ładunki klejowe w formie płynu, dwuskładnikowe kleje poliuretanowe umieszczone w opakowaniu foliowym składającym się z dwóch cylindrycznych otoczek tworzywowych umieszczonych jedna w drugiej i wypełnionych składnikami kleju. Ładunki klejowe wprowadzane są do wcześniej wywierconego otworu, następnie wkręcana jest metalowa kotew która niszczy otoczkę ładunku i następuje wymieszanie składników kleju oraz jego utwardzenie. Stosowany w górnictwie do zespalania luźnych skał i przerostów (węgla i skał), uszczelniania górotworu, wzmacniania ociosu węglowego, wzmacniania spągów oraz uszczelniania rur obsadowych dla otworów wiertniczych. Produkt pakowany jest do kartonów, sposób pakowania może być zmieniony na życzenie klienta.
Produkt w postaci cieczy koloru brązowego o charakterystycznym zapachu, przeznaczony do uszczelniania (hydroizolacji) otworów wiertniczych, uszczelniania studni odgazowujących, odwiertów do wydobycia gazu oraz ociosów w czasie drążenia tuneli. W składzie wyrobu m.in.: polimeryczny diizocyjanian (pMDI), glikol polipropylenowy oraz dodatki modyfikujące właściwości reologiczne, użytkowe i palność. Produkt pakowany jest w kanistry metalowe o pojemności 10 dm3 lub inne (na życzenie klienta).
Produkt na bazie polimerycznego diizocyjanianu z dodatkiem środków modyfikujących i uniepalniających (Komponent B), w postaci cieczy koloru brązowego. Produkt przeznaczony do mieszania ze składnikiem poliolowym (Komponentem A), dzięki czemu otrzymuje się dwuskładnikową żywicę iniekcyjną stosowaną w górnictwie do wzmacniania i uszczelniania kruchych i słabych mas skalnych i warstw węgla, które mogą mieć różną zawartość wilgoci. Stosowana jest również do uszczelniania wycieków wody i gazu. Produkt pakowany jest do metalowych beczek o pojemności 18 dm3, sposób pakowania może być zmieniony na życzenie klienta.
Produkt to polimer w postaci lepkiej cieczy, bezbarwnej do barwy lekko żółtej. Powstaje w reakcji poliolu z 3-(trimetoksysililo) propyloizocyjanianem w obecności katalizatora, do produktu dodawany jest środek, który wiąże wilgoć atmosferyczną (Trimetoksyvinylosilan). Produkt przeznaczony do bezrozpuszczalnikowych i izocyjanianowych szczeliw i elastycznych klejów, stosowany jako reaktywne spoiwo w klejach, uszczelniaczach lub powłokach. Produkt sprzedawany jest w paletopojemnikach IBC lub autocysternach.
Produkt to brązowa ciecz na bazie polimerycznego izocyjanianu pMDI z dodatkiem środków modyfikujących właściwości reologiczne, w którym masa rozpuszczalnika nie przekracza 50% masy roztworu. Produkt posiada zdolność polimeryzacji. Produkt stanowi jeden z komponentów dwuskładnikowego systemu krzemianowego, który ma zastosowanie w górnictwie i budownictwie. Według podanych informacji produkt pakowany jest w opakowania jednostkowe o pojemności 18 l, 26 l, 200 l, 1000 l. Produkt zaprezentowano opakowany w pojemnik metalowy.
Tvåkomponents polyuretanvara i obearbetad form föreliggande i behållare om 21,1 kg och 3,15 kg. Varans komponenter ska enligt uppgift blandas för att framställa en polyuretanpasta som är avsedd att verka bullerreducerande genom att varan appliceras på stålkonstruktionen i t.ex. ett fartyg för att minska spridningen av vibrationer från motorer och propellrar. Varan består enligt uppgift av polyuretan.
Adhesivo termofusible basado en un pre polímero de poliuretano que cura con la humedad de la atmósfera o de los materiales soportes. Se utiliza en la fabricación de tableros estratificados y como adhesivo por laminación. Se presenta en bloques irregulares de forma cilíndrica de peso superior a 1 kg.
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) Wegen der Einreihung von Copolymeren aus Monomeren der im Wortlaut der Position 3909 genannten Erzeugnisse und deren Gemische siehe die Anmerkung 4 zu Kapitel 39.
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören: 1) Aminoharze Diese entstehen durch Kondensation von Aminen oder Amiden mit Aldehyden (Formaldehyd, Furfuraldehyd usw.). Die wichtigsten sind Harnstoffharze (z. B. Harnstoff-Formaldehyd), Thioharnstoffharze (z. B. Thioharnstoff-Formaldehyd), Melamin-Harze (z. B. Melamin-Formaldehyd) und Anilinharze (z. B. Anilin-Formaldehyd). Diese Harze dienen zum Herstellen von transparenten oder intensiv gefärbten Kunststoffwaren; sie werden häufig durch Formen oder Gießen zu Waren für den Tischgebrauch, zu Zierartikeln oder zu elektrotechnischen Waren verarbeitet. In Lösungen und Dispersionen (Emulsionen oder Suspensionen) (auch mit Pflanzenölen, Fettsäuren, Alkoholen oder anderen Kunstharzen modifiziert) werden sie als Klebstoffe, als Textilappretur usw. verwendet (s. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EU) Nr. 2016/1645 der Kommission vom 07. September 2016 (ABl. EU Nr. L 245, S. 3): Eine Ware in Form unregelmäßiger, flacher, brauner, harter Bruchstücke (etwa 2 mm dick) oder Flocken, hergestellt aus: — etwa 58-69 GHT Kiefernharz (auch Tallharz oder Kolofonium genannt), — etwa 1-4 GHT Maleinsäureanhydrid, — etwa 11-24 GHT unterschiedliche Phenole, — etwa 5,5-9 GHT Formaldehyd, — etwa 7-12 GHT Pentaerythritol. Die Ware wird in einem mehrstufigen Verfahren hergestellt, das damit beginnt, dass Kolofonium und Maleinsäureanhydrid zu einem Kolofoniumaddukt umgewandelt werden. Durch Zugabe von Magnesiumoxid (als Katalysator für die folgenden Reaktionen), Phenolen und Formaldehyd entsteht ein polymerisiertes Harz. Schließlich werden freie Säuregruppen des Harzes nach Zugabe von Pentaerythritol verestert. …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
Subdivisions of this code
- 3909.50.90.20Preparation containing by weight: - 14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups, - 3 % or more but not more than 5 % of enzymatically modified starch, and - 77 % or more but not more than 83 % of water
- 3909.50.90.30Preparation containing by weight: - 16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups, - 19 % or more but not more than 23 % of diethylene glycol butyl ether, and - 60 % or more but not more than 64 % of water
- 3909.50.90.40Preparation containing by weight: - 34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups, - 37 % or more but not more than 39 % of propylene glycol, and - 26 % or more but not more than 28 % of water
- 3909.50.90.90Other
Frequently asked questions
What does customs tariff code 3909.50.90 cover?
Code 3909.50.90 covers Polyurethanes, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3909.50.90?
The third-country duty rate for 3909.50.90 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3909.50.90?
The first six digits form the HS code: 390950. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3909.50.90 have?
3909.50.90 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3909.50.90 sit in the tariff?
3909.50.90 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3909 Amino-resins, phenolic resins and polyurethanes, in primary forms > 390950 Polyurethanes. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3909.50.90?
Yes. The EBTI database holds decisions on 3909.50.90, for example DEBTI13471/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3909.50.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3909.50.90 to 1C111. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3909.50.90 change?
3909.50.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.