Customs tariff code 3910.00.00: I. PRIMÄRFORMEN, Silicone in Primärformen
Reference data as at 1 July 2026
Customs tariff code 3910.00.00 covers I. PRIMÄRFORMEN, Silicone in Primärformen. The third-country duty rate is 6.5 %, plus import VAT.
3910.00.00 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3910.00.00
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3910.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C006Fluids and lubricating materials, as follows:
- 1C006Fluids and lubricating materials, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Angaben des Antragstellers: Einkomponentiger Flüssigklebstoff mit niedrigem Elastitätsmodul, der speziell für die Spaltfüllung von Anzeigegeräten entwickelt wurde, um die optische Leistung und Haltbarkeit zu verbessern. Bei Bestrahlung mit UV-/sichtbarem Licht härtet er zu einem klaren, transparenten Silikonkautschuk aus. Typischer Anwendungsbereich Herstellung von Flachbildschirmen oder berührungsempfindlichen Bildschirmen z.B. in der Automobil Industrie im Innenraum (Touchpanels). Das Erzeugnis liegt in Form einer farblosen Flüssigkeit in 20 L oder 200 kg Gebinden vor. Es liegen vertrauliche Informationen zur Zusammensetzung vor. Befund: Silicone in Primärformen
Angaben des Antragstellers: Zweikomponentiger Silikonkautschuk zur Verwendung als Spaltfüller für Kühlkörperanwendungen in der Elektroindustrie. Ein Warenmuster wurde nicht vorgelegt. Die Ware wurde durch Produktinformationen und Datenblätter beschrieben. Aus diesen geht hervor, dass beide Komponenten in Form von Pasten vorliegen. Weiterhin lagen vertrauliche Informationen zur Zusammensetzung der Pasten und der Funktionen der verschiedenen Bestandteile vor. Befund: Silikone in Primärform.
Gel de silicone sous forme primaire, de type dispersion, destiné à l'industrie cosmétique.
Polymère de type silicone sous forme d'émollient cosmétique dispersé dans un solvant organique composé de 10-30 % alpha.-hydro-.omega.-hydroxypoly[ oxy(dimethylsilylane)] (CAS 31692-79-2 / 70131-67-8) et 70-90 % mélange de dodécane/tetradécane (CAS 112-40-3 / 629-59-4). Le produit fait office de matière première pour cosmétiques.
Angaben des Antragstellers: Bei der Ware handelt es sich um eine teiltransparente und knetbare Masse aus Polydimethylsiloxan mit Füllstoff. Die Ware wird bspw. zur Fixierung von Zier- und Schmuckgeständen bei Bild- und Video-Aufnahmen verwendet. Ein Warenmuster wurde nicht vorgelegt. Die Ware wurde anhand von Fotos veranschaulicht und durch ein Sicherheitsdatenblatt beschrieben. Befund: Es handelt sich um ein anderes Silicon in Primärform.
Toode on kaheosaline suure tugevusega isekõvenev silikoonpreparaat, mis on ette nähtud isolatsiooniklaaside jaoks. Sobib gaasiga täidetud kahe ja kolmekordsetele klaaspakettidele. Isolatsiooniklaasi hermeetiku alusmaterjal on saadaval 250 kg vaatides ja hermeetiku katalüsaator 25 kg ämbrites.
Silicone sous formes primaires, consistant en un joint d'étanchéité, sous forme liquide, de couleur grise. L'article est conditionné pour la vente au détail dans des fûts métalliques de 20 kgs. Il sera utilisé pour le collage et l'étanchéité sur pièces automobiles.
Angaben des Antragstellers: Basismaterialien einer Zahnabformmasse Formmassen auf der Basis von Siliconen und Füllstoffen für die Herstellung von Zahnabdrücken. Die Silicone sind nicht ausgehärtet und werden erst durch einen Activator (nicht Gegenstand der vZTA) in die endgültige Form gebracht. Ein Warenmuster wurde nicht vorgelegt. Befund: Es handelt sich um Silicone in Primärform mit Füllstoffen, eine Modelliermasse liegt nicht vor, da der Aktivator fehlt.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Silicone dieser Position sind chemisch nicht einheitliche Erzeugnisse, die in ihrem Molekül mehr als eine Silicium-Sauerstoff-Silicium-Bindung und organische Gruppen enthalten, die durch unmittelbare Silicium-Kohlenstoff-Bindungen an die Siliciumatome gebunden sind. Silicone sind sehr beständig und können entweder flüssig, halbflüssig, pastös oder fest sein. Zu ihnen gehören Siliconöle, Siliconfette, Siliconharze und Siliconelostomere. 1) Siliconöle und -fette werden verwendet als temperaturbeständige Schmiermittel, als wasserabweisende Imprägnierungsmittel, als Dielektrika, als Schauminhibitoren, als Entformungsmittel usw. Zubereitete Schmiermittel, die Siliconfette und -öle gemischt mit anderen Stoffen enthalten, gehören je nach ihrer Beschaffenheit zu Pos. 2710 oder 3403 (s. die entsprechenden Erläuterungen). …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
1. Warenzusammenstellungen, die aus zwei oder mehreren voneinander getrennten Bestandteilen bestehen, von denen einige oder alle zu diesem Abschnitt gehören, und die erkennbar dazu bestimmt sind, durch Vermischen ein Erzeugnis des Abschnitts VI oder VII herzustellen, sind der für dieses Erzeugnis zutreffenden Position zuzuweisen unter der Voraussetzung, dass die Einzelbestandteile: a) ohne weiteres Umpacken aufgrund ihrer Aufmachung eindeutig erkennbar dazu bestimmt sind, zusammen verwendet zu werden (RV C0701A00) b) zusammen gestellt werden und (RV C0701B00) c) entweder aufgrund ihrer Beschaffenheit oder ihrer entsprechenden Mengen als einander ergänzend erkennbar sind (RV C0701C00). 2. …
Subdivisions of this code
- 3910.00.00.10Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more
- 3910.00.00.15Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated
- 3910.00.00.20Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]
- 3910.00.00.25Preparations containing by weight: - 10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and - 10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)
- 3910.00.00.35Preparations containing by weight: - 30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and - 10 % or more, N,N - Dimethylacrylamide (CAS RN 2680-03-7)
- 3910.00.00.40Silicones of a kind used in the manufacture of long term surgical implants
- 3910.00.00.45Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8)
- 3910.00.00.50Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum
- 3910.00.00.55Preparation containing by weight: - 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2), - 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and - 1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)
- 3910.00.00.70Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices
- 3910.00.00.85Two-component silicone, with a viscosity of the mixture of 3 000 cps or more, but not more than 6 000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels
- 3910.00.00.90Other
Frequently asked questions
What does customs tariff code 3910.00.00 cover?
Code 3910.00.00 covers I. PRIMÄRFORMEN, Silicone in Primärformen. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3910.00.00?
The third-country duty rate for 3910.00.00 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3910.00.00?
The first six digits form the HS code: 391000. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3910.00.00 have?
3910.00.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3910.00.00 sit in the tariff?
3910.00.00 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3910 Silicones in primary forms. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3910.00.00?
Yes. The EBTI database holds decisions on 3910.00.00, for example DEBTI17026/25-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3910.00.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3910.00.00 to 1C006, 1C006. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3910.00.00 change?
3910.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.