Customs tariff code 3917.21.90.90: Other
Reference data as at 1 July 2026
Customs tariff code 3917.21.90.90 covers Other. The third-country duty rate is 6.5 %, plus import VAT.
3917.21.90.90 is TARIC code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3917.21.90.90
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 39PLASTICS AND ARTICLES THEREOF
- 3917Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
- 3917.21Of polymers of ethylene
- 3917.21.90Other
- 3917.21.90.90Other
From HS code to customs tariff code 3917.21.90.90
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 2B350hChemical manufacturing facilities, equipment and components, as follows:
- 2B350hChemical manufacturing facilities, equipment and components, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Rurka spustu wody przeznaczona do odprowadzania wody z lodówki. Rurka jest kształtem zbliżona do łuku posiadająca w ok. jednej czwartej długości wypustki po obu stronach. Zakończona jest zwężeniem, przez które montowana jest do podstawy lodówki. Zgodnie z oświadczeniem wnioskodawcy jest to sztywna rurka wykonana z polietylenu o wysokiej gęstości (HDPE). Wymiary: długość 45 cm, szerokość: 12 cm.
Rurka spustu wody stanowiąca element składowy układy chłodniczego i jest przeznaczona do odprowadzania wody z lodówki. Rurka jest kształtem zbliżona do łuku posiadająca w ok. jednej czwartej długości wypustki po obu stronach. Zakończona jest zwężeniem, przez które montowana jest do podstawy lodówki. Zgodnie z oświadczeniem wnioskodawcy jest to sztywna rurka wykonana z polietylenu o wysokiej gęstości (HDPE). Wymiary: długość 58 cm, szerokość: 12 cm.
Angaben des Antragstellers: 1,5 × 45 mm LWL-Spleiß-Einzelfalser-Schrumpfschlauch, 100 Stück/Packung Nach den beiliegenden Informationen dienen die Schrumpfschläuche dem Schutz von Lichtwellenleitern. Untersuchungsergebnisse an Warenmustern: In einem Polybeutel aus Kunststoff in Aufmachung für den Einzelverkauf befinden sich 100 (laut Verpackungsaufdruck) ca. 4,5 cm lange Schlauchabschnitte, die jeweils aus einem transparenten Innen- sowie einem transparenten Außenschlauch (beide aus einem Ethylen-Vinylacetat-Copolymer) bestehen. Zwischen den Innen- und den Außenschlauch wurde ein ca. 4 cm langer Metallstift eingearbeitet. Befund: Der Kunststoff ist für die Schläuche charakterverleihend im Hinblick auf die Bedeutung für die Verwendung. Demnach handelt es sich um nicht biegsame Schläuche aus Polymeren des Ethylens der Unterposition (KN) 3917 2190.
Tuyau de canalisation en matière plastique (PEHD), destiné à véhiculer sans pression des eaux pluviales. La paroi extérieure est annelée tandis que la paroi intérieure est lisse. Existe en plusieurs diamètres.
PLASTIC GUIDEWIRE DISPENSER IN THE FORM OF A TUBE MANUFACTURED FROM HIGH DENSITY POLYETHYLENE (HDPE) HELD IN A COIL WITH CLIPS. THIS DEVICE IS USED TO PACK AND TRANSPORT A GUIDEWIRE USED IN MEDICLA PROCEDURES AS ANGIOPLAST AND CAN ALSO BE USED BY A SURGEON TO FLUSH THE GUIDEWIRE WITH AN ANTI-COAGULANT SOLUTION PRIOR TO SURGERY
FLEXIBLE TUBE OF PLASTIC (HIGH-DENSITY POLYETHYLENE) USED FOR MEDICAL DISPENSERS GUIDEWIRE
Rurka służąca do picia napojów. Rurka o średnicy 5 mm i długości 150 mm, wykonana z polietylenu, zakończona silikonowym ustnikiem. Przeznaczona do stosowania w bidonie. Prezentowana po 2 szt. w opakowaniu. Decyzja WIT wydana w miejsce decyzji PL-WIT-2011-00928.
Rurka służąca do picia napojów. Rurka o średnicy 5 mm i długości 150 mm, wykonana z polietylenu, zakończona silikonowym ustnikiem. Przeznaczona do stosowania w bidonie. Prezentowana po 2 szt. w opakowaniu.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Im Sinne der Anmerkung 8 zu diesem Kapitel gelten als Rohre und Schläuche: a) Hohle Erzeugnisse, sowohl Halb- als auch Fertigerzeugnisse, die im allgemeinen zum Zuführen, Durchleiten oder Verteilen von Gasen oder Flüssigkeiten verwendet werden, sofern sie einen inneren Querschnitt haben, der rund, oval, rechteckig (wobei die Länge der einen Seite das 1,5-fache der anderen Seite nicht übersteigt) oder ein regelmäßiges Vieleck ist; und b) Wursthüllen (auch abgebunden oder anderweitig bearbeitet) und andere flachliegende Schläuche. Zu dieser Position gehören ebenfalls Fittings aus Kunststoffen für Rohre und Schläuche (z. B. Kniestücke, Flansche, Verbindungsstücke). Rohre und Schläuche sowie Fittings dafür können biegsam oder hart, verstärkt oder mit anderen Stoffen verbunden sein. (Bezüglich der Einreihung von Rohren und Schläuchen usw. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 738/2000 der Kommission vom 7. April 2000 (ABl. EG Nr. L 87/10) (RV L 738/00), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1): 1. Flexibles Erzeugnis für die temperaturgesteuerte Verteilung von Gasen oder Flüssigkeiten. Es ist von innen nach außen wie folgt aufgebaut: - ein einzelner flexibler Kunststoffschlauch für den Materialtransport, der einem Druck von 27,6 Mpa oder mehr standhält; - ein elektrisches Heizband, das durch eine Aluminiumplatte vom Transportschlauch getrennt ist; - eine Lage aus Aluminiumfolie, die den Transportschlauch, das Heizband und die Aluminiumplatte umgibt; - ein isoliertes elektrisches Kabel für die Steuerung des Heizbandes; - eine Lage aus Vliesstoff; - eine äußere Hülle aus flexiblem synthetischem Material. …
Nationale Entscheidungen und Hinweise (NEH) Der Ausschuss für den Zollkodex hat während seiner 2. Sitzung im April 2009 folgende Stellungnahme einstimmig angenommen: PVC-Schläuche mit Anschlussstücken. Die durchsichtigen und gerippten Schläuche sind an den Enden mit einem Trichter oder Fingertip ausgestattet. Sie sind einzeln in einer sterilen Verpackung mit der Aufschrift „Verbindungsschlauch, Fingertip/Trichter - Steril - nur bei unbeschädigter Verpackung“ aufgemacht. Die Einheit (Trichter, Schlauch, Fingertip) dient als Teil eines medizinischen Absaugkatheters und damit dem Absaugen und dem Transport von Körpersekreten. Die Einreihung in Position 9018 als Teil eines medizinischen Gerätes ist ausgeschlossen, da kein erkennbares Teil eines medizinischen Gerätes im Sinne der Anmerkung 2 b) zu Kapitel 90 vorliegt. …
1. Als „Kunststoffe" gelten in der Nomenklatur die Stoffe der Positionen 3901 bis 3914, die im Zeitpunkt der Polymerisation oder in einem späteren Stadium unter einer äußeren Einwirkung (im Allgemeinen Wärme und Druck, falls erforderlich auch unter Zuhilfenahme von Lösemitteln oder Weichmachern) durch Gießen, Pressen, Strangpressen, Walzen oder ein anderes Verfahren eine Form erhalten können oder erhalten haben, die auch nach Beendigung der äußeren Einwirkung erhalten bleibt (RV E3901100). Der Begriff „Kunststoffe" umfasst in der Nomenklatur auch Vulkanfiber. Dagegen ist dieser Begriff nicht anwendbar auf Stoffe, die als Spinnstoffe des Abschnitts XI gelten (RV E3901200). 2. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 3917.21.90.90 cover?
Code 3917.21.90.90 covers Other. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3917.21.90.90?
The third-country duty rate for 3917.21.90.90 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3917.21.90.90?
The first six digits form the HS code: 391721. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3917.21.90.90 have?
3917.21.90.90 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 3917.21.90.90 sit in the tariff?
3917.21.90.90 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3917 Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics > 391721 Of polymers of ethylene > 39172190 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3917.21.90.90?
Yes. The EBTI database holds decisions on 3917.21.90.90, for example PLBTIWIT-2021-000662. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 3917.21.90.90 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 3917.21.90.90 to 2B350h, 2B350h. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 3917.21.90.90 change?
3917.21.90.90 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.