Customs tariff code 3919.90.80: Other, andere
Reference data as at 1 July 2026
Customs tariff code 3919.90.80 covers Other, andere. The third-country duty rate is 6.5 %, plus import VAT.
3919.90.80 is CN code in the EU customs tariff, in chapter 39. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 3919.90.80
- Third-country duty
- 6.5 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 3919.90.80
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 6.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Andorra | 0 % | Customs Union Duty |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Plaque de matière plastique, auto-adhésive, de type crédence imitation carrelage, conditionnée sur un support papier, constituée par la superposition de couches distinctes : - sticker majoritairement blanc en PVC non alvéolaire ; - couche intermédiaire grise en PVC non alvéolaire ; - couche noire en mousse alvéolaire de polyéthylène servant de support à l'adhésif (acrylique). Le produit est destiné à l'ornementation des murs. Dimensions : 30x30cm
Plaque de matière plastique, auto-adhésive, de type crédence imitation carrelage, conditionnée sur un film protecteur en papier, constituée par la superposition de couches distinctes : - film transparent protecteur (PVC) ; - sticker avec impression marbrée (PVC) et contours à l'aspect métallisé (polyéthylène) ; - couche intermédiaire grise en matière plastique compacte, non alvéolaire (PVC) ; - couche noire en mousse plastique alvéolaire (polyéthylène) servant de support à l'adhésif (acrylique). Le produit est destiné à l'ornementation des murs. Dimensions : 31x31cm
Plaque de matière plastique, auto-adhésive, de type crédence imitation marbre, conditionnée sur un support papier, constituée par la superposition de couches distinctes : - sticker imitation marbre et or en PVC non alvéolaire ; - couche intermédiaire grise en PVC non alvéolaire ; - couche noire en polyéthylène alvéolaire servant de support à l'adhésif (acrylique). Le produit est destiné à l'ornementation des murs. Dimensions : 31X31cm
Självhäftande etikett enligt uppgift tillverkad av plastfolie, med måtten 120 x 80 mm (L x B), försedd med tryckt text och på ena sidan belagd med klistermedel. Etiketten föreligger på vaxat skyddspapper och är enligt uppgift avsedd att användas för märkning av containrar.
Assortiment conditionné à l’importation pour la vente au détail sous un film plastique transparent, puis dans un carton de 30 unités, composé : - de 10 feuillets de stickers, transparents et auto-adhésifs, en matière plastique (polyéthylène téréphtalate – PET) ; - de 7 feuillets en papier/carton imprimé, destinés à servir de support illustré pour recevoir des stickers ; - d’une pince destinée à faciliter la manipulation et le placement précis des mini-stickers sur les différents décors ; - et d’un carton de couleur grise destiné à servir de support aux scènes décoratives sur lesquelles les stickers sont positionnés. L’article est destiné à la pratique d’une activité créative et récréative. L'utilisateur crée et personnalise différentes scènes illustrées en positionnant des mini-stickers sur les supports fournis.
Angaben des Antragstellers: Polyethylenterephthalat-Folie, zur Weiterverarbeitung zu medizinischen Elektroden (EKG) Polyethylenterephthalat-Folie, bedruckt mit leitfähiger Schicht aus Silberpaste sowie ausgestattet mit Klebstoff und silikonisierter Klebstoffabdeckfolie Dieses Produkt ist ein halbfertiges Material, das als funktionaler Bestandteil für die Herstellung von Elektroden dient. Eine PET-Folie trägt eine strukturierte, elektrisch leitfähige Druckschicht, die später den Kontakt zu einem Elektrolyten herstellt und damit die Signalübertragung ermöglicht. Weiter enthält das Produkt eine Klebstoffschicht, die durch eine silikonisierte Abdeckfolie geschützt ist, um eine einfache Weiterverarbeitung zu gewährleisten. Das Vorprodukt wird nicht direkt am Patienten eingesetzt, sondern bildet die Basis für die Endmontage, bei der zusätzliche Komponenten ergänzt werden. Feststellungen an einem Warenmuster: Speziell gestanzte Folienabschnitte, auf der Oberseite mit silberfarbener Bedruckung und auf der Unterseite mit einem Kleber versehen, auf einem milchig, transparenten Folienträgerstreifen. Zusätzlich sind die gestanzten Folien gelocht. Befund: Es liegt eine andere selbstklebende Zellkunststofffolie vor.
Disque plat de matière plastique, auto-adhésif, fabriqué à partir d'une superposition de films de matière plastique non alvéolaire (polyéthylène, polyéthylène-co-vinyle acétate, acrylique), de type patch de peinture sèche utilisé pour la réparation de peinture pour appareils aéronautiques et navires. Le disque est doté d'une languette rouge permettant de décoller le disque du support.
Feuille de matière plastique (Polyuréthane) de forme plate, auto-adhésive sur une face, conditionnée en rouleau de plus de 20 cm de largeur et d'épaisseur 0,03 mm. Ce produit semi-fini est destiné à l'ouvraison de pansements adhésifs.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören alle selbstklebenden flachen Formen von Kunststoffen, auch in Rollen aufgemacht, andere als Bodenbeläge, Wand- oder Deckenverkleidungen der Pos. 3918. Der Geltungsbereich dieser Position beschränkt sich auf flache Formen, die durch Druck aufgebracht werden, d. h., die bei Raumtemperatur ohne Anfeuchten oder ohne andere Zusätze permanent klebend (ein- oder beidseitig) sind, und die fest auf einer Vielzahl unterschiedlicher Oberflächen nach bloßem Kontakt durch einfaches Andrücken mit dem Finger oder der Hand haften. Es ist zu beachten, dass Waren, die mit Motiven, Buchstaben oder bildlichen Darstellungen bedruckt sind, die im Hinblick auf die eigentliche Verwendung nicht nur nebensächlich sind, in dieser Position verbleiben (siehe Anmerkung 2 zu Abschnitt VII).
Zu Unterposition 3919 10 oder 3919 90: 1. Selbstklebende reflektierende Folien, bestehend aus einem Kunststofffilm mit in der Masse eingebetteten oder auf der Oberfläche aufgebrachten Glaskügelchen (Mikrokugeln) und einer Klebeschicht auf einer Seite, die durch eine kurz vor dem Gebrauch zu entfernende Papierlage geschützt ist, zum Herstellen von Signalplatten oder -tafeln, Werbetafeln, Schmuckmotiven usw.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EU) Nr. 336/2010 der Kommission vom 21. April 2010 (ABL EU Nr. L 102/25) (RV L 102/10): 1. Eine Scheibe mit einem Durchmesser von etwa 580 mm und einer Dicke von etwa 3 mm, bestehend aus zwei Schichten Polyurethan, eine davon mit maschinell eingeprägten Rillen, die andere mit einer Klebebeschichtung, die durch eine abziehbare Kunststofffolie geschützt ist (so genannte „Polymerscheibe“). Das Erzeugnis wird mit Maschinen zur Herstellung von Silizium- und Halbleiterscheiben (Wafers) verwendet. Es wird auf dem Trägerkopf eines auswechselbaren Werkzeugs solcher Maschinen angebracht, um die Wafers zu ebnen, zu glätten und zu polieren. Unterposition 3919 90 00 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur sowie nach dem Wortlaut der KN-Codes 3919 und 3919 90 00. …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Urteil des EuGH vom 19. Juli 2012 (RS C-336/11) Aus diesen Gründen hat der Gerichtshof (Achte Kammer) für Recht erkannt: Die Kombinierte Nomenklatur … ist dahin auszulegen, dass Polierscheiben, die für eine Poliermaschine zur Bearbeitung von Halbleitern - die als solche in die Tarifposition 8464 (oder ab 1. Januar 2007 in die Position 8486) einzureihen ist - bestimmt und getrennt von der Maschine eingeführt worden sind, sich als in der Mitte gelochte Scheiben aus einer harten Schicht aus Polyurethan, einer Schicht aus Polyurethanschaum, einer Klebeschicht und einer Schutzfolie aus Kunststoffen darstellen, weder irgendein Teil aus Metall noch irgendein Schleifmittel enthalten, mit einem flüssigen Schleifmittel für das Polieren von Wafern verwendet werden und je nach Abnutzungsgrad in bestimmten Abständen ersetzt werden müssen, als sel …
Subdivisions of this code
- 3919.90.80.10For use in certain types of aircraft
- 3919.90.80.20Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner
- 3919.90.80.23Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner
- 3919.90.80.24Reflecting laminated sheet: - consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, - covered on both sides with one or more layers of plastic material and - covered on one side with an adhesive layer and a release sheet
- 3919.90.80.30Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet
- 3919.90.80.31Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
- 3919.90.80.33Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm
- 3919.90.80.45Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm
- 3919.90.80.48Polytetrafluoroethylene film, -with a thickness of 50 µm or more, -with a width of 6,30 mm or more but not more than 740 mm, -an elongation at break of not more than 200 %, and -coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm
- 3919.90.80.49Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet
- 3919.90.80.50Self-adhesive reflecting sheet whether or not in segmented pieces, - whether or not containing a watermark, - with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: - a layer of acrylic or vinyl polymer, - a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, - a layer of metallisation, - an adhesive layer, and - a release sheet - whether or not containing an additional layer of polyester
- 3919.90.80.53Acrylic foam tape: - covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, - covered on the other side with an acrylic pressure sensitive adhesive, - covered on one or both sides with a release sheet, - with a peel adhesion of more than 25 N/cm (at an angle of 90° as determined by the ASTM D 3330 method)
- 3919.90.80.54Poly(vinyl chloride) film, on one side covered with - a polymer layer - an adhesive layer - a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer
- 3919.90.80.55Black polyvinyl chloride film: -with a gloss of more than 25 degrees according to ASTM D 2457, -whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner for use in the manufacture of die-cut films for interior and exterior surfaces of cars
- 3919.90.80.56Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm
- 3919.90.80.57Self-adhesive polycarbonate film, printed, whether or not arched, with:<br> <br>-a thickness of 0,3 mm or more, but not more than 0,4 mm,<br> <br>-minimum dimensions of 63 mm x 15 mm,<br> <br>-maximum dimensions of 278 mm x 117 mm,<br> <br>-a weight of not more than 5 g per piece,<br>intended for integration into combined instrument panels of passenger cars
- 3919.90.80.58Biaxially-oriented film of poly(methyl methacrylate), with a thickness of 20 μm or more but not more than 90 μm, covered on one side with an adhesive layer and a release sheet
- 3919.90.80.65Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner
- 3919.90.80.70Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad
- 3919.90.80.80Self adhesive reflecting film, consisting of several layers including: - a copolymer of acrylic resin, - polyurethane, - a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, - glass microspheres, and - an adhesive layer, with a release liner on one or both sides
- 3919.90.80.82Reflecting film consisting of: - a polyurethane layer, - a glass microspheres layer, - a metallised aluminium layer, and - an adhesive, covered on one or both sides with a release liner, - whether or not a poly(vinyl chloride) layer, - a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use
- 3919.90.80.83Reflector or diffuser sheets, in rolls, -for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or -for equal transmission and distribution of light, intended for LCD modules
- 3919.90.80.99Other
Frequently asked questions
What does customs tariff code 3919.90.80 cover?
Code 3919.90.80 covers Other, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 3919.90.80?
The third-country duty rate for 3919.90.80 is 6.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 3919.90.80?
The first six digits form the HS code: 391990. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 3919.90.80 have?
3919.90.80 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 3919.90.80 sit in the tariff?
3919.90.80 sits in this hierarchy: 39 PLASTICS AND ARTICLES THEREOF > 3919 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 391990 Other. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 3919.90.80?
Yes. The EBTI database holds decisions on 3919.90.80, for example FRBTIFR-BTI-2026-00945. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 3919.90.80 change?
3919.90.80 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.