Customs tariff code

Customs tariff code 4016.99.91: Other, andere, Gummi-Metall-Teile

Reference data as at 1 July 2026

Customs tariff code 4016.99.91 covers Other, andere, Gummi-Metall-Teile. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.

4016.99.91 is CN code in the EU customs tariff, in chapter 40. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.

This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.

Customs code
4016.99.91
Third-country duty
See subdivision
Declarable
No
Binding rulings
8

Where this code sits in the tariff

  1. 40RUBBER AND ARTICLES THEREOF
  2. 4016Other articles of vulcanised rubber other than hard rubber
  3. 4016.99Other
  4. 4016.99.91Other, andere, Gummi-Metall-Teile

From HS code to customs tariff code 4016.99.91

HS code4016.996 digits, uniform worldwide
CN code4016.99.918 digits, EU Combined Nomenclature

Duty rates and preferences

OriginDuty rateBasis
Faroe Islands0 %Tariff preference
Melilla0 %Tariff preference
Occupied palestinian Territory0 %Tariff preference
San Marino0 %Customs Union Duty
Türkiye0 %Customs Union Duty
Andorra0 %Customs Union Duty
EU-Switzerland agreement: re-imported goods0 %Tariff preference
GSP+ (incentive arrangement for sustainable development and…0 %Tariff preference
GSP-EBA (Special arrangement for the least-developed countries…0 %Tariff preference
Moldova, Republic of0 %Tariff preference
Ecuador0 %Tariff preference
OCTs (Overseas Countries and Territories)0 %Tariff preference

Rates from the EU TARIC database. Preferential rates require valid proof of origin.

Compliance regimes on this code

Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.

EUDRIn scoperubberonly partly in scope2023/1115
Possible dual-use control codes

Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.

  • 8A002oMarine systems, equipment and components, as follows:

Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.

Binding tariff information for this code

PLBTIWIT-2026-000898Issued by PLValid until 2029-08-27

Artykuł wykonany z wulkanizowanego kauczuku i stali. Stanowi nakładkę na łańcuch gąsienicy maszyn budowlanych (koparek). Wewnątrz gumowego korpusu nakładki znajdują się dwie rury z gwintem, do których przykręca się śrubami element montażowy. Gumowe nakładki stosowane są aby zapobiec uszkodzeniu podłoża przez metalowe gąsienice koparek. Elementy metalowe służą w celu wzmocnienia (nie stanowią niezależnej gąsienicy). Nakładka dostarczana jest wraz ze stalowym elementem montażowym i śrubami. Produkt występuje w wymiarach: długość od 400 mm do 700 mm, szerokość od 70 mm do 148 mm, wysokość od 46 mm do 82 mm. Towar jest transportowany na paletach, spięty taśmami.

FRBTIFR-BTI-2025-07673Issued by FRValid until 2029-07-22

Ouvrage constitué de caoutchouc vulcanisé non durci et non alvéolaire adhéré sur du métal disposant de trous de fixation, de type articulation élastique destinée à limiter les jeux, les frottements et l'usure des pièces en mouvement. Cette pièce assure notamment la fonction de suspension primaire au sein de la boîte d’essieu (articulation élastique de la bielle) des machines ferroviaires. Dimensions : Longueur : 225 mm Diamètre : 90 mm Poids : 3.9 kg

DEBTI20224/26-1Issued by DEValid until 2029-07-19

Angaben des Antragstellers: Drehkolben mit Gummierung Es handelt sich um ein aus Grauguss und NBR (Nitril-Butadien-Kautschuk) gefertigtes Erzeugnis, im Wesentlichen bestehend aus einem Drehkolbengrundkern (Grauguss) mit einer Gummierung (NBR). Es wurde kein Warenmuster vorgelegt. Anhand einer Abbildung des Drehkolbens stellt sich die Ware als schwarzes Formteil aus einer elastischen Außenseite und einer Metallhülse dar. Der medienführende, wesentliche Bestandteil des Drehkolbens besteht aus Weichkautschuk und ist charakterverleihend für die Ware. Befund: Andere Ware aus Weichkautschuk, Gummi-Metall-Teile, andere

FRBTIFR-BTI-2025-07672Issued by FRValid until 2029-07-10

Suspension pneumatique primaire, se composant d'une pièce métallique extérieure à la base du produit, d'un axe métallique central et de 3 intercalaires métalliques entièrement enrobés de caoutchouc vulcanisé, non durci et non alvéolaire. Cette suspension primaire se loge sur le bâti du bogie, pour lui assurer une plus grande stabilité à grande vitesse.

FRBTIFR-BTI-2025-07671Issued by FRValid until 2029-07-10

Suspension pneumatique secondaire, composée de pièces en caoutchouc vulcanisé non durci, et de pièces métalliques, dont la fonction est d'assurer la liaison entre l’essieu et le chariot (bogie) d'un véhicule ferroviaire. Elle se distingue par la combinaison d'un ressort pneumatique et d'un ressort auxiliaire en caoutchouc-métal intégré.

DKBTI26-1564451Issued by DKValid until 2029-06-10

Varen er et firkantet hanstik, der snævrer ind i bunden og munder ud i et smalt, rundt, aflangt stykke gummi med en lille udposning for enden. Denne fungerer som et slags håndtag. Det er oplyst, at varen kan beskytte kontakterne på et hunstik, når det ikke er i brug. Ifølge det oplyste består varen hovedsageligt af kloropren, mens varens kontakter er af metal. Varen findes i forskellige størrelser med 2, 3, 4, 5, 7 eller 9 kontakter.

DEBTI4056/26-1Issued by DEValid until 2029-04-26

​Angaben des Antragstellers: Gummierte Bodenplatte bestehend aus einem Schmiedeteil aus Metall, welches untrennbar mit einer Weichkautschukauflage verbunden ist. Die Gummibodenplatten werden auf die Kette des Laufwerks eines Straßenfertigers montiert. Ein Warenmuster wurde nicht vorgelegt. Anhand einer technischen Zeichnung und Fotographie stellt sich die Ware als annähernd rechteckige Platte dar, die aus einer Metallplatte mit Bohrungen als Untergrund besteht, deren Oberseite fast vollständig mit einer dicken, mit 4 Löchern versehenen Lage aus Kautschuk versehen ist. Befund: Andere Waren aus Weichkautschuk, andere, andere, andere, Gummi-Metall-Teile

DKBTI26-0125502Issued by DKValid until 2029-04-14

Varen er en dummy-konnektor i form af et hanstik. Selve stikket er rundt, snævrer ind i bunden og munder ud i et rundt aflangt stykke, der fungerer som et slags håndtag. Varen er med ben af metal, som er tilpasset et hunstik. Det er oplyst, at varen anvendes til beskyttelse af hunstik, når de ikke er i brug. Varen består af blødgummi, som ifølge det oplyste er fremstillet af chloroprengummi. Kun benene er af metal. Varen kan variere i diameter fra 6,4 – 46,5 mm afhængigt af hvilken konnektor den skal benyttes til. Varen kan benyttes til konnekterer med 1-25 kontakter.

Notes that govern this classification

Pos. 4016

Zu Unterpositionen 4016 99 52 bis 4016 99 97: Neben den in den Erläuterungen zu Pos. 4016 des HS, zweiter Absatz, Ziffern 7 bis 14, genannten Waren gehören hierher auch Polierblöcke, die mit (auswechselbarem) Schmirgelpapier überzogen werden und dazu dienen, bestimmte Werkstücke von Hand zu polieren.

Pos. 4016

Zu Unterposition 4016 99: 1. Schwingungsdämpfer aus einem dicken Gummiring, mit rechteckigem Querschnitt, rund oder rechteckig geformt, mit eingesetzten und durch Muttern gesicherten Metallschrauben an den gegenüberliegenden Seiten, zur Montage zwischen Platten und sonstigen Teilen. Siehe auch Avise 7318 29/1 und 8487 90/5.

Pos. 4016

Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 442/2000 der Kommission vom 25. Februar 2000 (ABl. EG Nr. L 54/33) (RV L442/00), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1): 1. Laufwerksketten aus Weichkautschuk, verstärkt mit eingebetteten Metalltraversen und Stahldrähten. Die Laufwerksketten werden zum Beispiel für Baumaschinen, Schneepistenplanierfahrzeuge oder landwirtschaftliche Maschinen benutzt. Die Metallteile dienen lediglich der Verstärkung und der Führung der Laufwerkskette. Siehe Abbildung A (1) Unterposition 4016 99 91 Einreihung gemäß den Allgemeinen Vorschriften 1, 3b) und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 1a) zu Abschnitt XVI, Anmerkung 2 a) zu Abschnitt XVII sowie dem Wortlaut der KN-Codes 4016, 4016 99 und 4016 99 91. …

Pos. 4016

Nationale Entscheidungen und Hinweise (NEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 180. Sitzung des Ausschusses für den Zollkodex vom 03. bis 06. Juli 2017 (mit Ergänzung zu Satz 1 der Begründung aus der 252. Sitzung des Ausschusses für den Zollkodex vom 19. bis 21. Februar 2024): Warenbeschreibung Es handelt sich um Griffe in Form von hohlen schlauchartigen Erzeugnissen, die an einer Seite geschlossen sind. Ihr Zweck besteht darin, das Umgreifen jeglicher Art von Metallstangen, die bei Sportgeräten, Rollern, Gehhilfen, Golf-Caddies und Fahrrädern zum Einsatz kommen, angenehmer zu machen. Die „Griffe“ bestehen häufig aus Kunststoff, Gummi oder Textil und sind manchmal mit einer Innenschicht aus Schaumstoff ausgestattet. Normalerweise werden sie paarweise verkauft. …

Subdivisions of this code

Frequently asked questions

What does customs tariff code 4016.99.91 cover?

Code 4016.99.91 covers Other, andere, Gummi-Metall-Teile. Classification turns on the material, function, and intended use of the goods, not on their trade name.

What is the duty rate for 4016.99.91?

TARIC holds no third-country rate of its own for 4016.99.91. The rate follows from the declarable commodity code beneath it.

What is the HS code for 4016.99.91?

The first six digits form the HS code: 401699. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.

How many digits does 4016.99.91 have?

4016.99.91 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.

Where does 4016.99.91 sit in the tariff?

4016.99.91 sits in this hierarchy: 40 RUBBER AND ARTICLES THEREOF > 4016 Other articles of vulcanised rubber other than hard rubber > 401699 Other. The parent headings and their notes help decide whether the classification holds.

Is there binding tariff information for 4016.99.91?

Yes. The EBTI database holds decisions on 4016.99.91, for example PLBTIWIT-2026-000898. A BTI shows which product characteristics the customs authority relied on.

What happens if the customs tariff code is wrong?

An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.

Is 4016.99.91 in scope of the EUDR?

Yes. 4016.99.91 appears in Annex I of the EU deforestation regulation (commodity rubber). The Annex entry is narrower than the code, so only part of it is in scope. A due diligence statement and geolocation data for the plots of production are required.

Is 4016.99.91 a dual-use item?

The customs code alone does not decide that. An indicative correlation links 4016.99.91 to 8A002o. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.

Does customs tariff code 4016.99.91 change?

4016.99.91 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.

Read more on classification

Classifying more than one product?

This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.