Customs tariff code 4412.33.20.10: Of wood other than okoumé, whether or not coated or surface-covered
Reference data as at 1 July 2026
Customs tariff code 4412.33.20.10 covers Of wood other than okoumé, whether or not coated or surface-covered. The third-country duty rate is 7 %, plus import VAT.
4412.33.20.10 is TARIC code in the EU customs tariff, in chapter 44. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 4412.33.20.10
- Third-country duty
- 7 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
- 44WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL
- 4412Plywood, veneered panels and similar laminated wood
- 4412.33Other, with at least one outer ply of non-coniferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.) chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.) oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.) robinia (Robinia spp.) tulipwood (Liriodendron spp.) or walnut (Juglans spp.)
- 4412.33.20With no outer ply of birch, but with at least one outer ply of poplar or aspen (Populus spp.)
- 4412.33.20.10Of wood other than okoumé, whether or not coated or surface-covered
From HS code to customs tariff code 4412.33.20.10
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
| Origin | Duty rate | Producer | Legal basis | Valid until |
|---|---|---|---|---|
| Türkiye | - | All other companies | Decision 0142/96 | - |
| ERGA OMNES | - | All other companies | Regulation 2333/25 | - |
| China | 86.8 % | Other | Regulation 2333/25 | - |
| China | Cond: A cert: D-008 (01):43.300 % ; A (01):86.800 % | Pizhou Jiangshan Wood Co., Ltd | Regulation 2333/25 | - |
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Filmbeschichtetes Sperrholz (Abbildung siehe Anlage), - aus neun kreuzweise aufeinander verleimten Holzfurnierlagen mit einer Dicke je Furnierlage von weniger als 6 mm (lt. Antragsteller), mit beiden äußeren Lagen aus technischem Furnier aus Pappelholz (lt. Antrag) und inneren Lagen (Mittellage) aus Furnieren aus Akazienholz (lt. Antrag), Abmessungen: 1220 x 2440 x 12 mm, - beidseitig mit Phenolharz beschichtet und mit Logo versehen, - zur Verwendung als Schalungsplatte. "Sperrholz, nicht aus Bambus, ausschließlich aus Furnieren (andere als Bambus) mit einer Dicke von 6 mm oder weniger, nicht mit einer äußeren Lage aus tropischem Holz, mit mindestens einer äußeren Lage aus anderem Holz als Nadelholz hier der Art Pappel (Populus spp.), ohne äußere Lage aus Birkenholz, jedoch mit mindestens einer äußeren Lage aus Pappelholz (Populus spp.), aus anderem Holz als Okoumé, auch überzogen oder auf der Oberfläche beschichtet"
Een zogenoemd multilaminaat met -volgens opgave- onder andere de volgende kenmerken: - voor gebruik als vloerpaneel binnenshuis; - een toplaag van 2 mm eikenfineer met 7 lagen vernis; - een onderlaag vervaardigd van multiplex van 7 lagen populieren hout met een totale dikte van 13 mm; - met aan de zijkanten een kliksysteem van een tand en een groef om de panelen over de lengte aan elkaar te schuiven; - afmetingen van 2.200 x 220 x 15 mm.
Revêtement de sol, de type lame de parquet, avec rainure et languette de 1,4mm d'épaisseur, constitué en bois contreplaqué composé exclusivement de feuilles de bois dont chacune a une épaisseur n'excédant pas 6mm, avec placage chêne en surface de 2mm d'épaisseur et une face intérieure en bois de peuplier. Épaisseur totale : 14 mm.
Notes that govern this classification
Zu Unterpositionen 4412 10, 4412 31, 4412 33, 4412 34 und 4412 39: Sperrholz verbleibt in diesen Unterpositionen, auch wenn es auf der Oberfläche überzogen oder weitergehend – wie im vorvorletzten Absatz der Erläuterungen zu Pos. 4412 beschrieben – bearbeitet ist.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 3829/86 in der Fassung der VO (EWG) Nr. 2080/91 der Kommission vom 16. Juli 1991 (ABl. EG Nr. L 193/6) (RV L 2080/91): Sperrholzplatten, 1981 bis 2 400 mm lang, 762 bis 1 220 mm breit und etwa 44 mm dick, die aus einem Kern, der zwischen zwei dreischichtigen Furnierplatten liegt, bestehen. Beide Längsseiten (ggf. furniert) und eine oder auch beide Breitseiten (ggf. furniert) bestehen jeweils im Wesentlichen aus einem Stück Holz, Kantenleiste genannt. Die Sperrholzplatten weisen keine weitere Bearbeitung auf. Position 4412 Verordnung (EG) Nr. 1199/2005 der Kommission vom 22. Juli 2005 (ABl. EU Nr. L 195/3) (RV L 1199/2005), geändert durch Verordnung (EG) Nr. 1179/2009 der Kommission vom 26. November 2009 (ABl. EU Nr. L 317/1), geändert durch Durchführungsverordnung (EU) Nr. 441/2013 der Kommission vom 7. …
Gerichtliche Entscheidungen (GE) - EuGH Auszug aus dem Urteil des EuGH vom 28. April 2022 in der Rechtssache C-72/21 (PRODEX): (38) Folglich müssen die in Rede stehenden Waren unabhängig von etwaigen zusätzlichen Bearbeitungen wie den vom vorlegenden Gericht in seiner dritten Vorlagefrage genannten, um in die Unterposition 4418 20 der KN eingereiht werden zu können, als unvollständige oder unfertige Waren, die aber im vorliegenden Zustand die wesentlichen Beschaffenheitsmerkmale der zu dieser Unterposition gehörenden Waren im Sinne des ersten Teils der Allgemeinen Vorschrift 2 a für die Auslegung der KN haben, derart weiterbearbeitet sein, dass ihre Verwendung als Türen, Rahmen, Verkleidungen und Schwellen von Türen eindeutig erkennbar ist. …
Gerichtliche Entscheidungen (GE) - national Urteil des Finanzgerichts München vom 23. November 2006 in der Rechtssache 14 K 2729/06 über die Einreihung von „LVL Laminatplatten“ in die Position 4412 der Kombinierten Nomenklatur. Tenor: Laminatplatten, die aus drei jeweils ca. 13 mm starken Platten, die quer zum Faserverlauf aufeinander geleimt sind, bestehen, wobei jede der Platten selbst aus fünf jeweils ca. 2,5 mm starken Schälfurnierunterlagen, die faserparallel miteinander verleimt sind, besteht, sind in die Unterposition 4412 99 80 1) der KN (ab 1. Januar 2010: 4412 99 40 bis 4412 99 85) einzureihen. 1) Anmerkung: ab 1.1.2022 zutreffende KN-Codes 4412 41 91 bis 4412 49 00
Subdivisions of this code
Frequently asked questions
What does customs tariff code 4412.33.20.10 cover?
Code 4412.33.20.10 covers Of wood other than okoumé, whether or not coated or surface-covered. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 4412.33.20.10?
The third-country duty rate for 4412.33.20.10 is 7 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 4412.33.20.10?
The first six digits form the HS code: 441233. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 4412.33.20.10 have?
4412.33.20.10 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 4412.33.20.10 sit in the tariff?
4412.33.20.10 sits in this hierarchy: 44 WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL > 4412 Plywood, veneered panels and similar laminated wood > 441233 Other, with at least one outer ply of non-coniferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.) chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.) oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.) robinia (Robinia spp.) tulipwood (Liriodendron spp.) or walnut (Juglans spp.) > 44123320 With no outer ply of birch, but with at least one outer ply of poplar or aspen (Populus spp.). The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 4412.33.20.10?
Yes. The EBTI database holds decisions on 4412.33.20.10, for example DEBTI25176/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 4412.33.20.10 in scope of the EUDR?
Yes. 4412.33.20.10 appears in Annex I of the EU deforestation regulation (commodity wood). A due diligence statement and geolocation data for the plots of production are required.
Is there an anti-dumping duty on 4412.33.20.10?
Yes. Trade defence measures are in force on 4412.33.20.10, covering origin Türkiye, ERGA OMNES, China. The rate depends on the producer: without the correct TARIC additional code, the residual rate for all other companies applies, which can be considerably higher.
Does customs tariff code 4412.33.20.10 change?
4412.33.20.10 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.