Customs tariff code

Customs tariff code 6909.19.00.70: Supports for catalysts or filters, consisting of porous ceramics made primarily from…

Reference data as at 1 July 2026

Customs tariff code 6909.19.00.70 covers Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm$2 of cross section. The third-country duty rate is 5 %, plus import VAT.

6909.19.00.70 is TARIC code in the EU customs tariff, in chapter 69. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.

This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.

Customs code
6909.19.00.70
Third-country duty
5 %
Declarable
No
Binding rulings
1

Where this code sits in the tariff

  1. 69CERAMIC PRODUCTS
  2. 6909Ceramic wares for laboratory, chemical or other technical uses; ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods
  3. 6909.19Other
  4. 6909.19.00Waren zu chemischen und anderen technischen Zwecken, andere
  5. 6909.19.00.70Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm$2 of cross section

From HS code to customs tariff code 6909.19.00.70

HS code6909.196 digits, uniform worldwide
CN code6909.19.008 digits, EU Combined Nomenclature
TARIC code6909.19.00.7010 digits, carries the EU measures

Duty rates and preferences

OriginDuty rateBasis
Third-country duty5 %MFN
Faroe Islands0 %Tariff preference
Melilla0 %Tariff preference
Occupied palestinian Territory0 %Tariff preference
Türkiye0 %Customs Union Duty
San Marino0 %Customs Union Duty
Andorra0 %Customs Union Duty
EU-Switzerland agreement: re-imported goods0 %Tariff preference
GSP-EBA (Special arrangement for the least-developed countries…0 %Tariff preference
GSP+ (incentive arrangement for sustainable development and…0 %Tariff preference
Moldova, Republic of0 %Tariff preference
Ecuador0 %Tariff preference
OCTs (Overseas Countries and Territories)0 %Tariff preference

Rates from the EU TARIC database. Preferential rates require valid proof of origin.

Compliance regimes on this code

Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.

Possible dual-use control codes

Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.

  • 1A006bEquipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
  • 1C010"Fibrous or filamentary materials", as follows:
  • 1C107Graphite and ceramic materials, other than those specified in 1C007, as follows:
  • 2B350gChemical manufacturing facilities, equipment and components, as follows:
  • 2B350iChemical manufacturing facilities, equipment and components, as follows:
  • 9A110Composite structures, laminates and manufactures thereof, other than those specified in 9A010, specially designed for use in 'missiles' or the subsystems specified in 9A005, 9A007, 9A105, 9A106.c., 9A107, 9A108.c., 9A116 or 9A119.
  • 9C108Insulation material in bulk form and "interior lining", other than those specified in 9A008, for rocket motor cases usable in "missiles" or specially designed for solid propellant rocket engines specified in 9A007 or 9A107.
  • 0004Weapons / munitions / military material (Ausfuhrliste Teil I A)

Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.

Binding tariff information for this code

DE8802/10-1Issued by DEValid until 2016-06-22

Keramische Ware zu technischen Zwecken, sog. DuraTrap AT-Filter, Foto siehe Anlage, - unbeschichteter, cremefarbener Träger für Katalysatoren, - in Form eines länglich-runden, asymmetrischen Zylinders, - mit mindestens einem in Längsrichtung durchgehenden Kanal (wabenartig) je Quadratzentimeter im Querschnitt, - nach vorheriger Formgebung keramisch gebrannt, - poröse Keramik, im Wesentlichen aus (laut ergänzenden Angaben) Oxyden des Aluminiums und des Titans bestehend, - mit einem Gesamtvolumen von nicht mehr als 65 Liter (laut ergänzenden Angaben), - mit einer Mohsschen Härte von weniger als 9, - mit den Abmessungen von ca. 16 x 12 x 18 cm, - zur Verwendung als Abgaskatalysator für PKW. "Keramische Ware zu technischen Zwecken, Träger für Katalysatoren, bestehend aus poröser Keramik im Wesentlichen aus Oxyden des Aluminiums und des Titans, einem Gesamtvolumen von nicht mehr als 65 Liter und mindestens einem (durchgehenden oder einseitig verschlossenen) Kanal je cm2 des Querschnitts"

Notes that govern this classification

Pos. 6909

Zu Unterpositionen 6909 1100 bis 6909 1900: Siehe die Erläuterungen zu Position 6909 des HS, zweiter Absatz Ziffern 1 und 2.

Pos. 6909

Avise zum Harmonisierten System (AV) 1. Teile aus Weichferrit, die als Teile von Maschinen, Apparaten oder Geräten des Kapitels 84 oder 90 erkennbar sind. Siehe Avise Kapitel 85/1 und 8504 90/1.

Pos. 6909

Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 679/72 (ABl. EG Nr. L 81/1) (RV L 679/72) in der Fassung der VO (EWG) Nr. 2080/91 der Kommission vom 16. Juli 1991 (ABl. EG Nr. L 193/6): Waren aus „vitreous china“ oder „semi-vitreous china“, die mehr oder weniger verglaste keramische Waren mit lichtgrauem oder künstlich gefärbtem und nicht an der Zunge haftendem Scherben sind und gleichzeitig aufweisen: a) eine Porosität (Wasseraufnahmekoeffizient) – nach der Methode im Anhang I 1) – von 3 v. H. oder weniger, b) eine Dichte von 2,2 oder mehr, c) eine Lichtdurchlässigkeit – nach der Methode im Anhang II 2) – bis zu einer Dicke von etwa 3 mm. Dieses Kriterium findet keine Anwendung, wenn der Scherben in der Masse gefärbt oder mit farbiger oder opaker Glasur überzogen ist. …

Pos. 6909

Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (467. Sitzung des Ausschusses für den Zollkodex vom 11. bis 13. Februar 2009) Platten in verschiedenen Formen und Größen zur Herstellung von Wendeschneidplatten mit einer Schicht aus polykristallinem kubischen Bor-Nitrid, zum Teil auf einem Träger aus gesintertem Hartmetall aufgebracht, sind in ihrer Rohform nach stofflicher Beschaffenheit einzureihen (Pos. 6909). Wenn die Platten zugeschnitten sind und direkt als Wendeschneidplatten eingesetzt werden können, werden diese Waren in Position 6909 eingereiht, weil die Bedingungen der Anmerkung 1 zu Kapitel 82 nicht erfüllt sind. …

Subdivisions of this code

Frequently asked questions

What does customs tariff code 6909.19.00.70 cover?

Code 6909.19.00.70 covers Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm$2 of cross section. Classification turns on the material, function, and intended use of the goods, not on their trade name.

What is the duty rate for 6909.19.00.70?

The third-country duty rate for 6909.19.00.70 is 5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.

What is the HS code for 6909.19.00.70?

The first six digits form the HS code: 690919. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.

How many digits does 6909.19.00.70 have?

6909.19.00.70 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.

Where does 6909.19.00.70 sit in the tariff?

6909.19.00.70 sits in this hierarchy: 69 CERAMIC PRODUCTS > 6909 Ceramic wares for laboratory, chemical or other technical uses; ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods > 690919 Other > 69091900 Waren zu chemischen und anderen technischen Zwecken, andere. The parent headings and their notes help decide whether the classification holds.

Is there binding tariff information for 6909.19.00.70?

Yes. The EBTI database holds decisions on 6909.19.00.70, for example DE8802/10-1. A BTI shows which product characteristics the customs authority relied on.

What happens if the customs tariff code is wrong?

An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.

Is 6909.19.00.70 a dual-use item?

The customs code alone does not decide that. An indicative correlation links 6909.19.00.70 to 1A006b, 1C010, 1C107, 2B350g, 2B350i, 9A110, 9C108, 0004. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.

Does customs tariff code 6909.19.00.70 change?

6909.19.00.70 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.

Read more on classification

Classifying more than one product?

This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.