Customs tariff code 6909.19.00.70.0: Träger für Katalysatoren oder Filter, bestehend aus poröser Keramik im Wesentlichen aus…
Reference data as at 1 July 2026
Customs tariff code 6909.19.00.70.0 covers Träger für Katalysatoren oder Filter, bestehend aus poröser Keramik im Wesentlichen aus Oxyden des Aluminiums und des Titans, einem Gesamtvolumen von nicht mehr als 65 Liter und mindestens einem (durchgehenden oder einseitig verschlossenem) Kanal je cm² des Querschnitts. The third-country duty rate is 5 %, plus import VAT.
6909.19.00.70.0 is national commodity code in the EU customs tariff, in chapter 69. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 6909.19.00.70.0
- Third-country duty
- 5 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 69CERAMIC PRODUCTS
- 6909Ceramic wares for laboratory, chemical or other technical uses; ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods
- 6909.19Other
- 6909.19.00Waren zu chemischen und anderen technischen Zwecken, andere
- 6909.19.00.70Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm$2 of cross section
- 6909.19.00.70.0Träger für Katalysatoren oder Filter, bestehend aus poröser Keramik im Wesentlichen aus Oxyden des Aluminiums und des Titans, einem Gesamtvolumen von nicht mehr als 65 Liter und mindestens einem (durchgehenden oder einseitig verschlossenem) Kanal je cm² des Querschnitts
From HS code to customs tariff code 6909.19.00.70.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1A006bEquipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
- 1C010"Fibrous or filamentary materials", as follows:
- 1C107Graphite and ceramic materials, other than those specified in 1C007, as follows:
- 2B350gChemical manufacturing facilities, equipment and components, as follows:
- 2B350iChemical manufacturing facilities, equipment and components, as follows:
- 9A110Composite structures, laminates and manufactures thereof, other than those specified in 9A010, specially designed for use in 'missiles' or the subsystems specified in 9A005, 9A007, 9A105, 9A106.c., 9A107, 9A108.c., 9A116 or 9A119.
- 9C108Insulation material in bulk form and "interior lining", other than those specified in 9A008, for rocket motor cases usable in "missiles" or specially designed for solid propellant rocket engines specified in 9A007 or 9A107.
- 0004Weapons / munitions / military material (Ausfuhrliste Teil I A)
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Zu Unterpositionen 6909 1100 bis 6909 1900: Siehe die Erläuterungen zu Position 6909 des HS, zweiter Absatz Ziffern 1 und 2.
Avise zum Harmonisierten System (AV) 1. Teile aus Weichferrit, die als Teile von Maschinen, Apparaten oder Geräten des Kapitels 84 oder 90 erkennbar sind. Siehe Avise Kapitel 85/1 und 8504 90/1.
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EWG) Nr. 679/72 (ABl. EG Nr. L 81/1) (RV L 679/72) in der Fassung der VO (EWG) Nr. 2080/91 der Kommission vom 16. Juli 1991 (ABl. EG Nr. L 193/6): Waren aus „vitreous china“ oder „semi-vitreous china“, die mehr oder weniger verglaste keramische Waren mit lichtgrauem oder künstlich gefärbtem und nicht an der Zunge haftendem Scherben sind und gleichzeitig aufweisen: a) eine Porosität (Wasseraufnahmekoeffizient) – nach der Methode im Anhang I 1) – von 3 v. H. oder weniger, b) eine Dichte von 2,2 oder mehr, c) eine Lichtdurchlässigkeit – nach der Methode im Anhang II 2) – bis zu einer Dicke von etwa 3 mm. Dieses Kriterium findet keine Anwendung, wenn der Scherben in der Masse gefärbt oder mit farbiger oder opaker Glasur überzogen ist. …
Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur, Mechanik/Verschiedenes (467. Sitzung des Ausschusses für den Zollkodex vom 11. bis 13. Februar 2009) Platten in verschiedenen Formen und Größen zur Herstellung von Wendeschneidplatten mit einer Schicht aus polykristallinem kubischen Bor-Nitrid, zum Teil auf einem Träger aus gesintertem Hartmetall aufgebracht, sind in ihrer Rohform nach stofflicher Beschaffenheit einzureihen (Pos. 6909). Wenn die Platten zugeschnitten sind und direkt als Wendeschneidplatten eingesetzt werden können, werden diese Waren in Position 6909 eingereiht, weil die Bedingungen der Anmerkung 1 zu Kapitel 82 nicht erfüllt sind. …
Frequently asked questions
What does customs tariff code 6909.19.00.70.0 cover?
Code 6909.19.00.70.0 covers Träger für Katalysatoren oder Filter, bestehend aus poröser Keramik im Wesentlichen aus Oxyden des Aluminiums und des Titans, einem Gesamtvolumen von nicht mehr als 65 Liter und mindestens einem (durchgehenden oder einseitig verschlossenem) Kanal je cm² des Querschnitts. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 6909.19.00.70.0?
The third-country duty rate for 6909.19.00.70.0 is 5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 6909.19.00.70.0?
The first six digits form the HS code: 690919. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 6909.19.00.70.0 have?
6909.19.00.70.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 6909.19.00.70.0 sit in the tariff?
6909.19.00.70.0 sits in this hierarchy: 69 CERAMIC PRODUCTS > 6909 Ceramic wares for laboratory, chemical or other technical uses; ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods > 690919 Other > 69091900 Waren zu chemischen und anderen technischen Zwecken, andere > 6909190070 Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm$2 of cross section. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 6909.19.00.70.0?
The EBTI database currently holds no valid decisions on 6909.19.00.70.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 6909.19.00.70.0 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 6909.19.00.70.0 to 1A006b, 1C010, 1C107, 2B350g, 2B350i, 9A110, 9C108, 0004. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 6909.19.00.70.0 change?
6909.19.00.70.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.