Customs tariff code 7506.20.00.20: Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: -a…
Reference data as at 1 July 2026
Customs tariff code 7506.20.00.20 covers Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: -a thickness of 0,5 mm or more but not more than 3 mm, -a width of 250 mm or more but not more than 1 219 mm. The third-country duty rate is 3.3 %, plus import VAT.
7506.20.00.20 is TARIC code in the EU customs tariff, in chapter 75. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7506.20.00.20
- Third-country duty
- 3.3 %
- Declarable
- No
- Binding rulings
- 0
Where this code sits in the tariff
- 75NICKEL AND ARTICLES THEREOF
- 7506Nickel plates, sheets, strip and foil
- 7506.20Of nickel alloys
- 7506.20.00aus Nickellegierungen
- 7506.20.00.20Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: -a thickness of 0,5 mm or more but not more than 3 mm, -a width of 250 mm or more but not more than 1 219 mm
From HS code to customs tariff code 7506.20.00.20
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.3 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C002aMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C002bMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C002dMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C003Magnetic metals, of all types and of whatever form, having any of the following:
- 1C002Metal alloys, metal alloy powder and alloyed materials, as follows:
- 1C003Magnetic metals, of all types and of whatever form, having any of the following:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Bleche, Bänder und Folien, die durch die Anmerkung 9 d) zu Abschnitt XV definiert werden. Die Erzeugnisse entsprechen den in den Erläuterungen zu den Pos. 7409 und 7410 beschriebenen Erzeugnissen aus Kupfer. Bleche und Bänder aus Nickel können zum Plattieren von Eisen und Stahl (durch Schweißen, Walzen usw.) und zum Bau von Apparaten, insbesondere für die chemische Industrie, verwendet werden. Nicht zu dieser Position gehören Streckbleche oder -bänder (Pos. 7508).
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 75 gelten als: a) nicht legiertes Nickel: Metall mit einem Nickel- und Cobaltgehalt von insgesamt 99 GHT oder mehr, sofern 1) der Cobaltgehalt 1,5 GHT oder weniger beträgt und 2) der Gehalt an jedem der anderen Elemente die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV F7501A00): Andere Elemente Element Höchstgrenze in GHT Fe Eisen 0,5 O Sauerstoff 0,4 Andere Elemente, je 0,3 b) Nickellegierungen: metallische Stoffe, in denen Nickel gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Cobaltgehalt mehr als 1,5 GHT beträgt (RV F7501B10), 2) der Gehalt an mindestens einem der anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV F7501B20) oder 3) der Gesamtgehalt an anderen Elementen als Nickel und Cobalt mehr als 1 GHT beträgt (RV F7501B30). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 7506.20.00.20 cover?
Code 7506.20.00.20 covers Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: -a thickness of 0,5 mm or more but not more than 3 mm, -a width of 250 mm or more but not more than 1 219 mm. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7506.20.00.20?
The third-country duty rate for 7506.20.00.20 is 3.3 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7506.20.00.20?
The first six digits form the HS code: 750620. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7506.20.00.20 have?
7506.20.00.20 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 7506.20.00.20 sit in the tariff?
7506.20.00.20 sits in this hierarchy: 75 NICKEL AND ARTICLES THEREOF > 7506 Nickel plates, sheets, strip and foil > 750620 Of nickel alloys > 75062000 aus Nickellegierungen. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7506.20.00.20?
The EBTI database currently holds no valid decisions on 7506.20.00.20. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7506.20.00.20 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7506.20.00.20 to 1C002a, 1C002b, 1C002d, 1C003, 1C002, 1C003. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7506.20.00.20 change?
7506.20.00.20 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.