Customs tariff code 7606.91.00: Of aluminium, andere, aus nicht legiertem Aluminium
Reference data as at 1 July 2026
Customs tariff code 7606.91.00 covers Of aluminium, andere, aus nicht legiertem Aluminium. The third-country duty rate is 7.5 %, plus import VAT.
7606.91.00 is CN code in the EU customs tariff, in chapter 76. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7606.91.00
- Third-country duty
- 7.5 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
From HS code to customs tariff code 7606.91.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 7.5 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
| Chile | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Aluminiumblech, mit Kunststoff beschichtet Bei der Ware handelt es sich um ein ovales Blech (Abmessungen: 47 mm x 60 mm), das auf einer Seite mit einer weißen Kunststoffbeschichtung und zusätzlich mit einer abziehbaren Schutzfolie versehen ist. Das ca. 0,5 mm dicke Blech besteht nach den Angaben aus nicht legiertem Aluminium. Das Erzeugnis dient als Ersatzplatte für Handtaschenspiegel. Danach handelt es sich um ein Blech, aus Aluminium, mit einer Dicke von mehr als 0,2 mm, anderes als quadratisch oder rechteckig, aus nicht legiertem Aluminium, andere der Unterposition 7606 9100 der Kombinierten Nomenklatur.
Dle údajů žadatele, předložené dokumentace a vzorku výrobku se jedná o polotovary z nelegovaného hliníku (kaloty) pro výrobu hliníkových tub s membránou. Tuby jsou určeny pro vteřinová lepidla, barvy na vlasy apod. Způsob výroby: Kontinuálně odlévaný pás, válcovaný na příslušnou tloušťku se dále dělí na pruhy, z nichž se vysekávájí kolečka (kaloty). Povrch se zdrsňuje otryskáním nebo omletím. Kaloty mají průměr od 12,5 mm do 39,7 mm a tloušťku od 2,9 mm do 10,2 mm.
Butzen Bei der als Butzen bezeichneten Ware handelt es sich um massive Flacherzeugnisse (kreisrunde, zylindrische Scheiben) mit rechteckigem Querschnitt aus Aluminium nach DIN EN 570 ("Butzen zum Fließpressen aus Halbzeug hergestellt"). Die Reinheit des Aluminiums beträgt min. 99,5%. Die Ware wird in unterschiedlichen Abmessungen gehandelt: z.B. 40 x 3,5; 35 x 4,5; 29,7 x 3,6; 24,8 x 3; 13,8 x 4,1 (Durchmesser x Dicke in mm). Sie wird durch Fließpressen weiterverarbeitet.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Diese Erzeugnisse, die durch die Anmerkung 9 d) zu Abschnitt XV definiert werden, entsprechen den gleichen Erzeugnissen aus Kupfer. Die Erläuterungen zu Pos. 7409 gelten daher sinngemäß für diese Position. Nicht zu dieser Position gehören: a) Folien und dünne Bänder, mit einer Dicke von 0,2 mm oder weniger (Pos. 7607). b) Streckbleche und -bänder (Pos. 7616).
Zu Unterpositionen 7606 11 bis 7606 92: 1. Laminierte Aluminiumerzeugnisse aus zwei flachgewalzten Blechen aus Aluminium als äußere Lagen des laminierten Erzeugnisses und einer Platte oder Lage aus Kunststoffen als innere Lage oder Seele. Die Dicke jeder der äußeren Lagen beträgt bis zu 2,54 mm und die innere Lage hat eine Dicke zwischen ungefähr 0,02 mm und 2,29 mm. Die Erzeugnisse bestehen normalerweise aus Rollen (Coils) mit einer Breite bis zu ungefähr 1 500 mm oder können in Platten zugeschnitten sein. Die Seele verbessert die Geräuschdämmungseigenschaften der Erzeugnisse. Sie werden zur Außenverkleidung von Gebäuden, zur Innendekoration, zur Herstellung von Blechen für Kraftfahrzeugkarosserien, Haushaltsgeräten, Büromaschinen usw. verwendet.
Nationale Entscheidungen und Hinweise (NEH) Stellungnahme des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 183. Sitzung des Ausschusses für den Zollkodex vom 23. bis 26. Oktober 2017: Warenbeschreibung: Rechteckige Platten, bestehend aus einem Kern aus Kunststoff (Polypropylen) mit einer individuellen Dicke von 2,0 mm bis 4,0 mm, der auf beiden Seiten mit Blechen aus einer Aluminiumlegierung bedeckt ist (die Dicke jedes Aluminiumblechs kann von 0,2 mm bis 0,3 mm reichen). Die Aluminiumbleche sind auf ihrer Oberfläche mit Farbe versehen oder lackiert. Ihre Abmessungen sind: 1220 x 3050 mm; 1500 × 3050 mm; 1500 x 4050 mm; 1500 x 5000 mm. Die Waren werden universell verwendet, z.B. …
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 76 gelten als: a) nicht legiertes Aluminium: Metall mit einem Aluminiumgehalt von 99 GHT oder mehr, sofern der Gehalt an jedem anderen Element die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet: (RV F7601A00): Andere Elemente Element Höchstgrenze in GHT Fe + Si (Eisen und Silicium zusammen) 1 Andere Elemente (1), je 0,1 (2) b) Aluminiumlegierungen: metallische Stoffe, in denen Aluminium gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Gehalt an einem der anderen Elemente oder an Eisen und Silicium zusammen die in der vorstehenden Tabelle angegebenen Höchstgrenzen überschreitet (RV F7601B10) oder 2) der Gesamtgehalt an diesen anderen Elementen mehr als 1 GHT beträgt (RV F7601B20). 2. …
Subdivisions of this code
- 7606.91.00.25Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm
- 7606.91.00.30Other
- 7606.91.00.86Not backed, without internal layers of other material, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm; - in plates, of a thickness exceeding 6 mm
- 7606.91.00.88Other
Frequently asked questions
What does customs tariff code 7606.91.00 cover?
Code 7606.91.00 covers Of aluminium, andere, aus nicht legiertem Aluminium. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7606.91.00?
The third-country duty rate for 7606.91.00 is 7.5 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7606.91.00?
The first six digits form the HS code: 760691. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7606.91.00 have?
7606.91.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7606.91.00 sit in the tariff?
7606.91.00 sits in this hierarchy: 76 ALUMINIUM AND ARTICLES THEREOF > 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm > 760691 Of aluminium, not alloyed. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7606.91.00?
Yes. The EBTI database holds decisions on 7606.91.00, for example DEBTI14907/22-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7606.91.00 covered by CBAM?
Yes. 7606.91.00 appears in Annex I of the CBAM regulation (sector Aluminium). Importers report embedded emissions and surrender CBAM certificates.
Does customs tariff code 7606.91.00 change?
7606.91.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.