Customs tariff code 8412.90.70: Parts, andere
Reference data as at 1 July 2026
Customs tariff code 8412.90.70 covers Parts, andere. TARIC holds no third-country duty rate of its own for this code; the rate follows from the declarable commodity code beneath it.
8412.90.70 is CN code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8412.90.70
- Third-country duty
- See subdivision
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
From HS code to customs tariff code 8412.90.70
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Stangendichtung (Abbildung siehe Anlage) - in Form eines zweiteiligen, entsprechend den Einbauverhältnissen verwendungs- spezifisch gefertigten, ringförmigen Dichtelements, aus einem Kunststoff- Profilring und einem an der Außenseite aufgezogenen O-Rings, - in gleicher Weise verwendbar in einen Pneumatik- oder Hydraulikzylinder, - zur Abdichtung und zum Schutz vor dem Eindringen von Verunreinigungen beim Zurückfahren der Kolben-/Zylinderstange in das Innere. „Teil, erkennbar ausschließlich für andere Motoren und Kraftmaschinen bestimmt, keine Ware der Unterpositionen (KN) 8412 9020 bis 8412 9060 – Stangendichtung“
Corps avant : pièce destinée à être installée dans un cylindre de frein qui a une fonction de moteur pneumatique au sens qu’il assure la conversion de l’énergie pneumatique en énergie mécanique qui se traduit par un mouvement linéaire. Fonctions du corps avant : permettre l’assemblage du produit fini sur l’étrier du frein à disque (par l’intermédiaire des deux goujons de fixation), assurer l’étanchéité de la fonction frein de service et assurer la course du frein de service. Le corps avant est en acier avec assemblage mécano soudé.
Abstreifer-Dichtung (Abbildung siehe Anlage) - in Form eines entsprechend den Einbauverhältnissen verwendungsspezifisch gefertigten, ringförmigen Einbauelements aus Polyurethan mit Stützsegment und leicht abgerundeter Abstreiferlippe sowie zusätzlicher Dichtlippe am Außendurchmesser, - konzipiert zum Einbau in einen Pneumatik- oder Hydraulikzylinder zum Schutz vor dem Eindringen von Verunreinigungen beim Zurückfahren der Zylinderstange in das Innere. "Teil, erkennbar ausschließlich für andere Motoren und Kraftmaschinen bestimmt, keine Ware der Unterpositionen (KN) 8412 9020 bis 8412 9060 - Abstreifer-Dichtung"
Abstreifer mit Metallgehäuse (Abbildung siehe Anlage) - in Form eines entsprechend den Einbauverhältnissen verwendungsspezifisch gefertigten, ringförmigen Einbauelements mit einer zurückgesetzten Abstreiflippe aus Polyurethan und einem L-förmigen Außenring aus unlegiertem Stahl, - nach Einpressung in einen axial offenen Einbauraum eines Pneumatik- oder Hydraulikzylinders zum Schutz vor dem Eindringen von Verunreinigungen beim Zurückfahren der Zylinderstange in das Innere bestimmt. "Teil, erkennbar ausschließlich für andere Motoren und Kraftmaschinen bestimmt, keine Ware der Unterpositionen (KN) 8412 9020 bis 8412 9060 - Abstreifer mit Metallgehäuse"
Corps Intermédiaire Dimension : 174x174x54mm. Pièce destinée à être installée dans un cylindre de frein qui a une fonction de moteur pneumatique au sens qu’il assure la conversion de l’énergie pneumatique en énergie mécanique qui se traduit par un mouvement linéaire. Fonctions du corps intermédiaire : Permettre la liaison entre la partie « frein de service » et la partie « frein de parking ». Assurer l’approvisionnement d’air de tout le cylindre de frein de service et frein de parking. Assurer la course du frein de parking et frein de service. Aluminium coulé et traité
Partie de moteur pneumatique, se présentant sous la forme d'un piston assemblé en acier, destiné à être installé dans un cylindre de frein pneumatique. Il convertit l’énergie pneumatique en mouvement linéaire pour transmettre l’effort de freinage, assurer la course du frein de service, centrer le ressort de rappel et garantir l’étanchéité avec le soufflet. La pièce est constituée d’une plaque en acier découpée, emboutie et roulée pour obtenir l’arrondi requis, sur laquelle est soudée une tige décolletée. L’ensemble forme un piston assemblé destiné à fonctionner dans un cylindre de frein pneumatique. Dimensions : 109 x 109 x 95 mm.
Partie de moteur pneumatique se présentant sous la forme d'un piston assemblé en aluminium moulé, destiné à être installé dans un cylindre de frein pneumatique. Il a pour fonction de convertir l’énergie pneumatique en mouvement linéaire, afin de transmettre l’effort de freinage. Il assure l’étanchéité avec le soufflet et accueille le ressort de puissance du système de freinage. Dimensions : 166 x 166 x 135.
Nutring T20 (Abbildung siehe Anlage) - aus einem spezifisch, gefertigten ringförmigen Erzeugnis mit einem etwa Y-förmigen Querschnitt und asymmetrischem Profil, zurückgesetzter Innenlippe und Haftsitz am Außendurchmesser, aus Polyester-Urethan-Kautschuk, - zum Einbau in Pneumatik- oder Hydraulikzylinder bestimmt, zur Verwendung als Stangendichtung. "Teil, erkennbar ausschließlich für linear arbeitende Zylinder bestimmt, keine Ware der Unterpositionen (KN) 8412 9020 bis 8412 9060 - Nutring"
Notes that govern this classification
Zu Unterposition 8412 90: 1. Unlackiertes Windturbinenblatt, hauptsächlich aus Kohlefaser und Glasfaser gefertigt. Nach dem Lackieren wird das Blatt an der Rotornabe einer Windkraftanlage befestigt. Anwendung der Allgemeinen Vorschriften 1 (Anmerkung 2 b) zu Abschnitt XVI) und 6.
Nationale Entscheidungen und Hinweise (NEH) Der Ausschuss für den Zollkodex - Fachbereich zolltarifliche und statistische Nomenklatur (Bereich Mechanik/Verschiedenes) hat zur Einreihung von Rotorblättern für Windkraftanlagen wie folgt Stellung genommen (24. Sitzung des Ausschusses für den Zollkodex vom 16. bis 18. Dezember 2009): Waren, bestehend aus Glasfaser-Expoxidharz, mit einer glatten Gelcoat-Beschichtung auf der Außenoberfläche und einer Länge von etwa 50 m. Sie werden als „Windturbinenblätter“ bezeichnet. Die „Blätter“ sind erkennbar zur Verwendung mit einer Windkraftanlage (Windkraftmaschine mit eingebautem Generator) bestimmt. Wenn die „Blätter“ rotieren, wandelt der Generator der Windkraftanlage die kinetische Energie des Windes in mechanische Energie um, die dann in Elektrizität umgewandelt wird. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
16. Position 8412 AV 16.06.2026
Subdivisions of this code
- 8412.90.70.10For use in civil aircraft
- 8412.90.70.20Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with: - a length of 3,5 m or more but not more than 4,5 m, - a width of 2 m or more but not more than 4,2 m, - a height of 1 m or more, but not more than 1,3 m, - a weight of 11 tons or more but not more than 21,5 tons, - mounting bores for yawdrive, - mounting flange for gearbox support, - drivetrain mount, - different screw sockets
- 8412.90.70.30Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with: -a diameter of 2 m or more, but not more than 5 m, -a weight of 2 tons or more but not more than 7 tons
- 8412.90.70.90Other
Frequently asked questions
What does customs tariff code 8412.90.70 cover?
Code 8412.90.70 covers Parts, andere. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8412.90.70?
TARIC holds no third-country rate of its own for 8412.90.70. The rate follows from the declarable commodity code beneath it.
What is the HS code for 8412.90.70?
The first six digits form the HS code: 841290. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8412.90.70 have?
8412.90.70 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 8412.90.70 sit in the tariff?
8412.90.70 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8412 Other engines and motors > 841290 Parts. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8412.90.70?
Yes. The EBTI database holds decisions on 8412.90.70, for example DEBTI33008/26-1. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8412.90.70 change?
8412.90.70 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.