Customs tariff code 8466.94.00.00: For machines of heading 8462 or 8463
Reference data as at 1 July 2026
Customs tariff code 8466.94.00.00 covers For machines of heading 8462 or 8463. The third-country duty rate is 1.2 %, plus import VAT.
8466.94.00.00 is TARIC code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8466.94.00.00
- Third-country duty
- 1.2 %
- Declarable
- No
- Binding rulings
- 8
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8466Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand
- 8466.94For machines of heading 8462 or 8463
- 8466.94.00.00For machines of heading 8462 or 8463
From HS code to customs tariff code 8466.94.00.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 1.2 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1B003Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
- 2B004Hot "isostatic presses" having all of the following, and specially designed components and accessories therefor:
- 2B008'Compound rotary tables' and "tilting spindles", specially designed for machine tools, as follows:
- 2B109Flow-forming machines, other than those specified in 2B009, usable in the "production" of propulsion components and equipment (e.g. motor cases and interstages) for "missiles", and specially designed components as follows:
- 2B204"Isostatic presses", other than those specified in 2B004 or 2B104, and related equipment, as follows:
- 2B209Flow forming machines, spin forming machines capable of flow forming functions, other than those specified in 2B009 or 2B109, and mandrels, as follows:
- 2B008'Compound rotary tables' and "tilting spindles", specially designed for machine tools, as follows:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Es handelt sich um ein funktionsgebundenes Maschinenteil in einer Blechpressenanlage aus Stahlguss. Der sog. Verschiebetisch dient als Bewegungselement, insbesondere für: das Tragen und Verschieben von Anlagenteilen oder Pressgut, die Aufnahme hoher statischer und dynamischer Lasten, die präzise Positionierung im Pressprozess. „Teil, erkennbar für Werkzeugmaschinen der Position 8462 bestimmt.“ (Angaben laut Antragsteller) (Abbildung laut Anlage)
Werkzeugkopf (Abbildung siehe Anlage) - in Form eines speziell geformten, quaderförmigen Metallerzeugnisses mit einer U-förmigen Aussparung, einem Kegel und zwei Führungsnuten - zum Einbau in eine Schneidring-Montage und Bördelmaschine bestimmt, zum Aufweiten eines Rohres durch Einschieben des Kegels mittels des Hydraulikkolbens. "Teil, erkennbar ausschließlich für eine Maschine der Position 8462 bestimmt - Werkzeugkopf"
Gestell (Abbildung siehe Anlage) - spezifisch, nach technischer Zeichnung gefertigtes, rechteckiges Erzeugnis aus Stahl mit speziellen Abkantungen und Durchbrechungen versehen, - zum Einbau in eine Werkzeugmaschine zum Abkanten und Biegen von Metallen bestimmt, zur Verwendung als Grundgestell. "Teil, erkennbar ausschließlich eine Maschine der Position 8462 bestimmt - Gestell"
Gegenhaltplatte (Abbildung siehe Anlage) - nach technischer Zeichnung spezifisch gefertigtes, annähernd rechteckigen Werkstück, oben mit einer und unten mit zwei U-förmigen Aussparungen und abgeschrägten Kanten sowie an der Unterseite mit einer kreisförmigen Lochung versehen, - erhältlich in verschiedenen Ausführungen hinsichtlich Abmessungen, - zum Einsetzen in eine Schneidring-Montagemaschine zur Verwendung als Gegenhaltplatte für Metallrohre mit kleinem Querschnitt, um diese mit einem Schneidring zu versehen. "Teil, erkennbar ausschließlich für eine Maschine der Position 8462 bestimmt, keine Ware der TARIC-Codes 8466 1020 00 bis 8466 9360 00 - Gegenhaltplatte"
Ständer (Abbildung siehe Anlage) - aus einer einer Halteplatte, einem Fuß mit sieben Aufhängungen für Profilrollen und vier Standfüßen, aus unedlem Metall, - zur sicheren Aufnahme und Fixierung einer Biegemaschine für Flacherzeugnisse aus Metall, zur Erhöhung der Sicherheit und Präzision beim Biegen, da ein Wackeln oder Rutschen durch die Verankerung im Boden verhindert wird sowie zur Aufnahme von auswechselbaren Werkzeugen. "Zubehör, erkennbar ausschließlich für eine Maschine der Position 8462 - Ständer"
Speziell nach technischer Zeichnung gefertigte Stempel und Matrizen, bereits in einer Einheit verbunden (aus einem Guss) mit einem Grundgestell (Werkzeughalter) aus Stahl. Diese Werkzeuge werden in mechanische oder hydraulische Pressen eingebaut und dienen zum Bearbeiten (Beschneiden, Formen, Lochen, Abkanten) von Metallen. „Teil, erkennbar für Werkzeugmaschinen der Position 8462 bestimmt.“ (Abbildung siehe Anlage)
2er-Set Auflagebacken für Werkstattpresse (Abbildung siehe Anlage) - in Form einer Zusammenstellung von zwei spezifisch geformten, rechteckigen Auflagebacken (Ab- messungen: 160 x 75 x 18 mm) aus Stahl, - zur Verwendung als Ersatzteile der 20-Tonnen Werkstattpresse, - dienen nach erfolgter Montage auf dem Querträger einer hydraulischen Werkstattpresse als Auflage- flächen des zu bearbeitenden Gegenstandes. "Teile und Zubehör, erkennbar ausschließlich oder hauptsächlich bestimmt für Maschinen der Positionen 8456 bis 8465, keine Ware der TARIC-Codes 8466 1020 00 bis 8466 3000 00, nicht für Maschinen der Positionen 8464, 8465 und 8456 bis 8461, für Maschinen der Position 8462"
14-teiliges Set Treibsatz Austreiber Werkstattpresse (Abbildung siehe Anlage) - in Form einer Zusammenstellung von verschiedenen Presshülsen und -bolzen aus Werkzeugstahl, - in verschiedenen Ausführungen und Abmessungen im Set vorhanden, - zur Verwendung als Austreiberaufsätze für hydraulische Werkstattpressen aller Stempeldurchmesser, - dient zur Durchführung von Arbeiten mit Lagern, Buchsen und Simmeringen sowie f ür alle Arten von Auspressarbeiten mit hydraulischen Werkstattpressen, - gemeinsam in einem besonders gestalteten und zum dauernden Gebrauch geeigneten Transportkoffer verpackt. "Teile und Zubehör, erkennbar ausschließlich oder hauptsächlich bestimmt für Maschinen der Po- sitionen 8456 bis 8465, keine Ware der TARIC-Codes 8466 1020 00 bis 8466 3000 00, nicht für Maschinen der Positionen 8464, 8465 und 8456 bis 8461, für Maschinen der Position 8462 in einem Transportkoffer"
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören vorbehaltlich der allgemeinen Bestimmungen über die Einreihung von Teilen (siehe Erläuterungen zu Abschnitt XVI, Allgemeines) und mit Ausnahme der Werkzeuge des Kapitels 82: A) Teile der Maschinen der Positionen 8456 bis 8465. B) Zubehör für diese Maschinen, d. h. auswechselbare Ausrüstungsgegenstände, welche die genannten Maschinen der auszuführenden Arbeit anpassen, Vorrichtungen, die den Maschinen zusätzlich Bearbeitungsmöglichkeiten oder eine höhere Präzision geben und Vorrichtungen, die es ermöglichen, eine im Zusammenhang mit der Hauptfunktion der Maschinen stehende Sonderarbeit auszuführen. C) Werkzeughalter für von Hand zu führende Werkzeuge oder Werkzeugmaschinen, aller Art. Zu den hier erfassten Teilen und Zubehör gehören u. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8466.94.00.00 cover?
Code 8466.94.00.00 covers For machines of heading 8462 or 8463. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8466.94.00.00?
The third-country duty rate for 8466.94.00.00 is 1.2 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8466.94.00.00?
The first six digits form the HS code: 846694. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8466.94.00.00 have?
8466.94.00.00 has ten digits and carries the EU measures held in TARIC. A German import declaration requires the eleven-digit commodity code.
Where does 8466.94.00.00 sit in the tariff?
8466.94.00.00 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8466 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand > 846694 For machines of heading 8462 or 8463. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8466.94.00.00?
Yes. The EBTI database holds decisions on 8466.94.00.00, for example ATBTI2026000147-DEC. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 8466.94.00.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 8466.94.00.00 to 1B003, 2B004, 2B008, 2B109, 2B204, 2B209, 2B008. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 8466.94.00.00 change?
8466.94.00.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.