Customs tariff code 8483.30.38.60.0: Bearing housing of a kind used in turbochargers: - of precision-cast grey cast iron…
Reference data as at 1 July 2026
Customs tariff code 8483.30.38.60.0 covers Bearing housing of a kind used in turbochargers: - of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560, andere :, Lagergehäuse von der in Turboladern verwendeten Art, hergestellt im Präzisionsgussverfahren aus grauem Gusseisen gemäß DIN EN 1561 oder aus duktilem Gusseisen DIN EN 1560, mit Ölkammern, ohne Lager, mit einem Durchmesser von 50 mm oder mehr, jedoch nicht mehr als 250 mm, mit einer Höhe von 40 mm oder mehr, jedoch nicht mehr als 150 mm, auch mit Wasserkammern und Verbindungsstücken. The third-country duty rate is 3.4 %, plus import VAT.
8483.30.38.60.0 is national commodity code in the EU customs tariff, in chapter 84. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is declarable: you can use it in this form on a customs declaration.
- Customs code
- 8483.30.38.60.0
- Third-country duty
- 3.4 %
- Declarable
- Yes
- Binding rulings
- 0
Where this code sits in the tariff
- 84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
- 8483Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
- 8483.30Bearing housings, not incorporating ball or roller bearings; plain shaft bearings
- 8483.30.38Other
- 8483.30.38.60Bearing housing of a kind used in turbochargers: - of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560, - with oil chambers, - without bearings, - with a diameter of 50 mm or more, but not more than 250 mm, - with a height of 40 mm or more, but not more than 150 mm, - whether or not with water chambers and connectors
- 8483.30.38.60.0Bearing housing of a kind used in turbochargers: - of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560, andere :, Lagergehäuse von der in Turboladern verwendeten Art, hergestellt im Präzisionsgussverfahren aus grauem Gusseisen gemäß DIN EN 1561 oder aus duktilem Gusseisen DIN EN 1560, mit Ölkammern, ohne Lager, mit einem Durchmesser von 50 mm oder mehr, jedoch nicht mehr als 250 mm, mit einer Höhe von 40 mm oder mehr, jedoch nicht mehr als 150 mm, auch mit Wasserkammern und Verbindungsstücken
From HS code to customs tariff code 8483.30.38.60.0
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.4 % | MFN |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
The EBTI database currently holds no valid binding tariff information for this code. Comparable cases are found through the parent heading.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören hauptsächlich mechanische Vorrichtungen, die zur Kraftübertragung dienen, 1. entweder von einer Antriebsmaschine auf eine oder mehrere Arbeitsmaschinen oder 2. von einem Maschinenteil auf einen anderen innerhalb derselben Maschine. A) Wellen (einschließlich Nockenwellen und Kurbelwellen) und Kurbeln Die Vorrichtungen dieser Gruppe übertragen in der Regel die Antriebskraft als Drehbewegung. Nach ihrer Arbeitsweise und Form unterscheidet man: 1) Antriebswellen. Sie werden unmittelbar vom Motor angetrieben. 2) Abtriebswellen. Sie erhalten die Bewegung von der Antriebswelle über ein Getriebe, eine Riemenscheibe mit Treibriemen oder auf andere Weise und übertragen sie auf Maschinen oder andere Abtriebswellen. 3) Gelenkwellen. Sie bestehen aus zwei oder mehr Wellenteilen, die durch Kugelgelenke, Kreuzgelenke usw. …
Einzelentscheidungen zur Kombinierten Nomenklatur (EE) Verordnung (EG) Nr. 1452/2007 der Kommission vom 7. Dezember 2007 (ABL EU Nr. L 325, Seite 66) (RV L1452/2007): 1. Ein Kugeldrehkranz, bestehend aus zwei konzentrischen Schmiedestahlringen, von denen einer mit einer Verzahnung versehen ist. Die Ringe sind drehbar, da sie durch Reihen von Stahlkugellagern getrennt sind. Durch die Verzahnung entsteht eine Drehmomentübertragung. Die Ware ist zum Einbau in einen Bagger bestimmt. Unterposition 8483 90 89 Einreihung gemäß den Allgemeinen Vorschriften 1 und 6 für die Auslegung der Kombinierten Nomenklatur, Anmerkung 2 a zum Abschnitt XVI und dem Wortlaut der KN-Codes 8483, 8483 90 und 8483 90 89. …
Nationale Entscheidungen und Hinweise (NEH) Internationale Entscheidungen und Hinweise (IEH) Protokollerklärung des Ausschusses für den Zollkodex, Fachbereich Zolltarifliche und Statistische Nomenklatur (Teilbereich Textilien und Mechanik/Verschiedenes) - 250. Sitzung des Ausschusses für den Zollkodex vom 4. bis 6. Dezember 2023: Warenbeschreibung: Antriebsrad einer Raupen-Erdbewegungsmaschine Es handelt sich um eine Ware in Form eines Zahnrads aus Stahl, das so ausgelegt ist, dass es in eine Raupenkette greift, um als Antriebsrad einer Erdbewegungsmaschine zu dienen. Das Antriebsrad stellt das Bewegungselement der Raupenkette dar. Das Kettenrad ist über ringförmig angebrachte Bolzen mit der Antriebswelle verbunden. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Frequently asked questions
What does customs tariff code 8483.30.38.60.0 cover?
Code 8483.30.38.60.0 covers Bearing housing of a kind used in turbochargers: - of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560, andere :, Lagergehäuse von der in Turboladern verwendeten Art, hergestellt im Präzisionsgussverfahren aus grauem Gusseisen gemäß DIN EN 1561 oder aus duktilem Gusseisen DIN EN 1560, mit Ölkammern, ohne Lager, mit einem Durchmesser von 50 mm oder mehr, jedoch nicht mehr als 250 mm, mit einer Höhe von 40 mm oder mehr, jedoch nicht mehr als 150 mm, auch mit Wasserkammern und Verbindungsstücken. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8483.30.38.60.0?
The third-country duty rate for 8483.30.38.60.0 is 3.4 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8483.30.38.60.0?
The first six digits form the HS code: 848330. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8483.30.38.60.0 have?
8483.30.38.60.0 has eleven digits and is the full German commodity code used on an import declaration. A German import declaration requires the eleven-digit commodity code.
Where does 8483.30.38.60.0 sit in the tariff?
8483.30.38.60.0 sits in this hierarchy: 84 NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF > 8483 Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) > 848330 Bearing housings, not incorporating ball or roller bearings; plain shaft bearings > 84833038 Other > 8483303860 Bearing housing of a kind used in turbochargers: - of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560, - with oil chambers, - without bearings, - with a diameter of 50 mm or more, but not more than 250 mm, - with a height of 40 mm or more, but not more than 150 mm, - whether or not with water chambers and connectors. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8483.30.38.60.0?
The EBTI database currently holds no valid decisions on 8483.30.38.60.0. Comparable cases are found through the parent heading instead.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8483.30.38.60.0 change?
8483.30.38.60.0 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.