Customs tariff code 8534.00: Gedruckte Schaltungen
Reference data as at 1 July 2026
Customs tariff code 8534.00 covers Gedruckte Schaltungen. The third-country duty rate is 0 %, plus import VAT.
8534.00 is HS subheading in the EU customs tariff, in chapter 85. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 8534.00
- Third-country duty
- 0 %
- Declarable
- No
- Binding rulings
- 7
Where this code sits in the tariff
From HS code to customs tariff code 8534.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 0 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| GSP+ (incentive arrangement for sustainable development and… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| Ecuador | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Binding tariff information for this code
Circuits imprimés souples, monocouches, ne comportant pas de composant électronique mais seulement des éléments conducteurs, se présentant sous les formes suivantes : - Bande de tissu de verre recouvert d'une résine transparente, sur lequel sont déposés des motifs en cuivre de manière régulière (épaisseur totale : 265 micromètres) : un quadrillage de 65mm avec à l'intérieur de chaque cellule 17 pastilles (épaisseur : 90 micromètres) carrées (11X11mm) et rectangulaires (11X32mm). - Bande (épaisseur : 120 micromètres) de matière plastique (polyimide) recouverte d'une résine acrylique, transparente et de couleur brunâtre sur laquelle sont déposés des motifs de cuivre (épaisseur : 20 micromètres) de manière régulière : un quadrillage de 61mm avec à l'intérieur de chaque cellule 16 pastilles rondes (14mm). Ils ont une fonction d'absorption des ondes électromagnétiques dans des applications éoliennes.
Etiquettes à Radio-Frequence 8.2MHZ avec un circuit imprimé au dos. Les étiquettes ont une face papier et une face adhésive et seront collées sur des produits pour protéger contre le vol. Le circuit conducteur déclenche le système antivol quand une personne traverse avec le produit protégé.
Circuits imprimés nus, simple couche ou multi-couches, ne comportant ni éléments passifs ni éléments actifs.
Unfertige gedruckte Schaltung (Abbildung siehe Anlage), - aus einem rechteckigen, starren, teilweise mit Bohrungen versehenen Kunststoffkörper (Abmessungen ca. 610 x 530 mm oder 610 x 460 mm) aus mehreren Lagen, auf den inneren Lagen mit in einem Druckverfahren hergestellten Leiterbahnen und auf den Außenseiten mit einer Kupferkaschierungen ausgestattet, welche z.B. durch Ätzen weiterbearbeitet werden, - zu Transportzwecken mehrere Schaltungen auf einem gemeinsamen Träger, - in Form einer mehrlagigen Schaltung (Multilayer) in Mass Lamination-Technik. "Gedruckte Schaltung noch nicht fertig bearbeitet"
Leiterplatten (Abbildungen siehe Anlage), - in Form von gedruckten Schaltungen mit Leiterbahnen und Kontakten versehen, - in sog. Nutzenformaten (Abmessungen ca. 186 x 286 mm bzw. 114 x 302 mm). "Gedruckte Schaltung"
Leiterplatte (Abbildung siehe Anlage), - in Form einer gedruckten Schaltung mit Leiterbahnen und Kontakten versehen. "Gedruckte Schaltung, nur mit Leiterbahnen oder Kontakten"
Gedruckte Schaltung (Abbildung siehe Anlage), - bestehend aus einer selbstklebenden Kunststofffolie, auf einer Seite mit Leiterbahnen aus Silberpaste bedruckt, mit zwei rechteckigen Aussparungen, auf der klebenden Seite mit einer Schutzabdeckung aus Papier. "Gedruckte Schaltung, nur mit Leiterbahnen"
Notes that govern this classification
Erläuterungen zur Kombinierten Nomenklatur (KN) Hierher gehören: 1. Papieretiketten in Form einer gedruckten Schaltung, die z. B. in Bibliotheksbüchern verwendet werden, um sie vor Diebstahl zu schützen; 2. flexible elektrische Leiter in Form von gedruckten Schaltungen.
Erläuterungen zum Harmonisierten System (HS) Gemäß Anmerkung 8 zu Kapitel 85 gehören zu dieser Position Schaltungen, bei deren Herstellung auf einem isolierenden Träger durch ein beliebiges Druckverfahren (Drucken im eigentlichen Sinne, Einprägen, Elektroplattieren, Ätzen usw.) Leiterbahnen, Kontakte oder andere aufgedruckte Elemente wie Induktionsspulen, Widerstände und Kondensatoren („passive“ Elemente) angebracht werden, nicht jedoch Bauelemente, die ein elektrisches Signal erzeugen, umformen, demodulieren, verändern oder verstärken können, wie Dioden, Trioden oder andere „aktive“ Elemente. Manche Grundschaltungen oder „ungeschaltete“ Leiterplatten bestehen nur aus gedruckten Leiterbahnen aus im Allgemeinen dünnen einheitlichen Streifen oder Bändern und ggf. Verbindungs- oder Kontaktvorrichtungen. …
1. Zu Kapitel 85 gehören nicht: a) Bettdecken, Heizkissen, Fußwärmer und ähnliche Gegenstände, mit elektrischer Heizvorrichtung; Kleidung, Schuhe, Ohrenschützer und andere am Körper zu tragende Gegenstände, mit elektrischer Heizvorrichtung (RV E8501A00); b) Glaswaren der Position 7011 (RV E8501B00); c) Maschinen, Apparate und Geräte der Position 8486 (RV E8501C00); d) Staubsauger von der für medizinische, chirurgische, zahnärztliche oder tierärztliche Zwecke verwendeten Art (Position 9018) (RV E8501D00); oder e) elektrisch beheizte Möbel des Kapitels 94 (RV E8501E00). 2. Waren, die sowohl den Positionen 8501 bis 8504 als auch der Position 8511, 8512, 8540, 8541 oder 8542 zugewiesen werden können, sind in eine der fünf zuletzt genannten Positionen einzureihen (RV E8502100). Quecksilberdampfgleichrichter mit Metallgefäß gehören jedoch zu Position 8504 (RV E8502200). 3. …
1. Zu Abschnitt XVI gehören nicht: a) Förderbänder und Treibriemen, aus Kunststoffen des Kapitels 39, Förderbänder und Treibriemen aus vulkanisiertem Kautschuk (Position 4010) sowie Waren zu technischen Zwecken aus Weichkautschuk (Position 4016) (RV C1601A00); b) Waren zu technischen Zwecken aus Leder oder rekonstituiertem Leder (Position 4205) oder aus Pelzfellen (Position 4303) (RV C1601B00); c) Spulen, Hülsen, Röhrchen und ähnliche Träger, aus Stoffen aller Art (z. B. Kapitel 39, 40, 44, 48 oder Abschnitt XV) (RV C1601C00); d) Lochkarten für Jacquard- oder ähnliche Maschinen (z. B. Kapitel 39 oder 48 bzw. …
Subdivisions of this code
Frequently asked questions
What does customs tariff code 8534.00 cover?
Code 8534.00 covers Gedruckte Schaltungen. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 8534.00?
The third-country duty rate for 8534.00 is 0 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 8534.00?
The first six digits form the HS code: 853400. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 8534.00 have?
8534.00 has six digits and matches the globally uniform HS subheading. A German import declaration requires the eleven-digit commodity code.
Where does 8534.00 sit in the tariff?
8534.00 sits in this hierarchy: 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES > 8534 Printed circuits. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 8534.00?
Yes. The EBTI database holds decisions on 8534.00, for example FR-RTC-2015-006804. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Does customs tariff code 8534.00 change?
8534.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.