Customs tariff code 7506.20.00: Of nickel alloys, aus Nickellegierungen
Reference data as at 1 July 2026
Customs tariff code 7506.20.00 covers Of nickel alloys, aus Nickellegierungen. The third-country duty rate is 3.3 %, plus import VAT.
7506.20.00 is CN code in the EU customs tariff, in chapter 75. This page shows the full classification path, the duty rate, the official comparison cases, and the notes that govern this code.
This code is not declarable on its own. A declaration needs one of the subdivisions beneath it.
- Customs code
- 7506.20.00
- Third-country duty
- 3.3 %
- Declarable
- No
- Binding rulings
- 3
Where this code sits in the tariff
From HS code to customs tariff code 7506.20.00
Duty rates and preferences
| Origin | Duty rate | Basis |
|---|---|---|
| Third-country duty | 3.3 % | MFN |
| Switzerland | 0 % | Tariff preference |
| Faroe Islands | 0 % | Tariff preference |
| Melilla | 0 % | Tariff preference |
| Occupied palestinian Territory | 0 % | Tariff preference |
| Türkiye | 0 % | Customs Union Duty |
| San Marino | 0 % | Customs Union Duty |
| Andorra | 0 % | Customs Union Duty |
| EU-Switzerland agreement: re-imported goods | 0 % | Tariff preference |
| GSP-EBA (Special arrangement for the least-developed countries… | 0 % | Tariff preference |
| Moldova, Republic of | 0 % | Tariff preference |
| OCTs (Overseas Countries and Territories) | 0 % | Tariff preference |
| United Kingdom | 0 % | Tariff preference |
Rates from the EU TARIC database. Preferential rates require valid proof of origin.
Compliance regimes on this code
Beyond the duty rate, these EU regimes attach to this code. Each verdict follows from the code alone; the goods themselves can still fall outside a regime.
Indicative correlation only. The mapping from customs codes to dual-use control codes is guidance, not a classification. Whether an item is controlled depends on its technical parameters.
- 1C002aMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C002bMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C002dMetal alloys, metal alloy powder and alloyed materials, as follows:
- 1C003Magnetic metals, of all types and of whatever form, having any of the following:
- 1C002Metal alloys, metal alloy powder and alloyed materials, as follows:
- 1C003Magnetic metals, of all types and of whatever form, having any of the following:
Derived from TARIC and the published EU regulations. It is a starting point for a screening, not a compliance assessment of your goods.
Binding tariff information for this code
Potrivit descrierii facute de solicitant si imaginilor publicate in baza de date, produsul reprezinta o banda din aliaj de nichel, in trei variante de dimensiuni: latime 22,5mm, grosime 0,5mm; latime 30,4mm, grosime 0,4mm, respectiv latime 45,3mm, grosime 0,7mm. Banda se livreaza sub forma de role, in cutii de lemn tip palet. Produsul se foloseste pentru fabricarea tuburilor pentru elementele de incalzit tubulare (teaca externa), prin profilare in forma de tub pe laminoarele de formare, si sudare pe un cordon longitudinal. Are proprietati anticorozive la temperaturi mari.
Conform descrierii solicitantului si a imaginilor publicate in baza de date, produsul reprezinta banda din aliaj de nichel, in trei dimensiuni: latime 22,5mm, grosime 0,5mm; latime 30,4mm, grosime 0,4mm, respectiv latime 45,3mm, grosime 0,7mm. Banda se livreaza sub forma de role, in cutii de lemn tip palet. Produsul se foloseste pentru fabricarea tubului pentru elementele de incalzit tubulare (teaca externa), prin profilare in forma de tub pe laminoarele de formare, si sudare pe un cordon longitudinal. Are proprietati anticorozive la temperaturi mari.
Bänder aus Nickel-Chrom-Legierung Bei der Ware handelt es sich nach den Angaben um Bänder (Platten und Scheiben) mit unterschiedlichen Abmessungen aus einer Nickel-Chrom-Legierung mit einem Nickelgehalt von mindestens 75 % und einem Chromanteil von mindestens 15 %. Eine beispielhafte Abmessung ist 3680 mm x 244 mm x 22 mm. Die Ware kann an den Ecken abgerundet sein und in regelmäßigen Abständen Bohrlöcher zur Befestigung aufweisen. Die Platten können sowohl einteilig als auch aus mehreren Kacheln bestehen. Die Ware wird zum Aufdampfen einer Nickel-Chrom-Schicht in Anlagen der PVD-Beschichtung verwendet. Die Ware ist als Bleche, Bänder und Folien, aus Nickel, aus Nickellegierungen, in die Unterposition 7506 2000 der Kombinierten Nomenklatur einzureihen.
Notes that govern this classification
Erläuterungen zum Harmonisierten System (HS) Zu dieser Position gehören Bleche, Bänder und Folien, die durch die Anmerkung 9 d) zu Abschnitt XV definiert werden. Die Erzeugnisse entsprechen den in den Erläuterungen zu den Pos. 7409 und 7410 beschriebenen Erzeugnissen aus Kupfer. Bleche und Bänder aus Nickel können zum Plattieren von Eisen und Stahl (durch Schweißen, Walzen usw.) und zum Bau von Apparaten, insbesondere für die chemische Industrie, verwendet werden. Nicht zu dieser Position gehören Streckbleche oder -bänder (Pos. 7508).
Unterpositions-Anmerkungen 1. Im Sinne des Kapitels 75 gelten als: a) nicht legiertes Nickel: Metall mit einem Nickel- und Cobaltgehalt von insgesamt 99 GHT oder mehr, sofern 1) der Cobaltgehalt 1,5 GHT oder weniger beträgt und 2) der Gehalt an jedem der anderen Elemente die in der nachstehenden Tabelle angegebenen Höchstgrenzen nicht überschreitet (RV F7501A00): Andere Elemente Element Höchstgrenze in GHT Fe Eisen 0,5 O Sauerstoff 0,4 Andere Elemente, je 0,3 b) Nickellegierungen: metallische Stoffe, in denen Nickel gegenüber jedem der anderen Elemente gewichtsmäßig vorherrscht, sofern 1) der Cobaltgehalt mehr als 1,5 GHT beträgt (RV F7501B10), 2) der Gehalt an mindestens einem der anderen Elemente die in der vorstehenden Tabelle angegebene Höchstgrenze überschreitet (RV F7501B20) oder 3) der Gesamtgehalt an anderen Elementen als Nickel und Cobalt mehr als 1 GHT beträgt (RV F7501B30). …
1. Zu Abschnitt XV gehören nicht: a) Farben und Tinten, auf der Grundlage von Metallpulver oder Metallflitter, sowie Prägefolien (Positionen 3207 bis 3210, 3212, 3213 oder 3215) (RV C1501A00); b) Cer-Eisen und andere Zündmetall-Legierungen (Position 3606) (RV C1501B00); c) Kopfbedeckungen und Teile davon, aus Metall, der Position 6506 oder 6507 (RV C1501C00); d) Schirmgestelle und andere Waren der Position 6603 (RV C1501D00); e) Waren des Kapitels 71 (z. B. …
Subdivisions of this code
- 7506.20.00.10Sheets and strips in coils of nickel alloy C276 (EN 2.4819) with -a thickness of 0,5 mm or more but not more than 3 mm, -a width of 770 mm or more but not more than 1 250 mm
- 7506.20.00.20Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: -a thickness of 0,5 mm or more but not more than 3 mm, -a width of 250 mm or more but not more than 1 219 mm
- 7506.20.00.90Other
Frequently asked questions
What does customs tariff code 7506.20.00 cover?
Code 7506.20.00 covers Of nickel alloys, aus Nickellegierungen. Classification turns on the material, function, and intended use of the goods, not on their trade name.
What is the duty rate for 7506.20.00?
The third-country duty rate for 7506.20.00 is 3.3 %. Goods originating in a country with a preferential agreement may qualify for a lower rate against valid proof of origin.
What is the HS code for 7506.20.00?
The first six digits form the HS code: 750620. Those are uniform worldwide, while the further digits carry the EU Combined Nomenclature and the national subdivision.
How many digits does 7506.20.00 have?
7506.20.00 has eight digits and matches the EU Combined Nomenclature. A German import declaration requires the eleven-digit commodity code.
Where does 7506.20.00 sit in the tariff?
7506.20.00 sits in this hierarchy: 75 NICKEL AND ARTICLES THEREOF > 7506 Nickel plates, sheets, strip and foil > 750620 Of nickel alloys. The parent headings and their notes help decide whether the classification holds.
Is there binding tariff information for 7506.20.00?
Yes. The EBTI database holds decisions on 7506.20.00, for example ROBTI2025/004923. A BTI shows which product characteristics the customs authority relied on.
What happens if the customs tariff code is wrong?
An incorrect code leads to post-clearance recovery of duty and import VAT, delays at clearance, and a penalty where it repeats. A classification with documented reasoning can be defended in an audit.
Is 7506.20.00 a dual-use item?
The customs code alone does not decide that. An indicative correlation links 7506.20.00 to 1C002a, 1C002b, 1C002d, 1C003, 1C002, 1C003. Whether your item is listed depends on its technical parameters and has to be checked against the wording of the control list.
Does customs tariff code 7506.20.00 change?
7506.20.00 is currently valid. The Combined Nomenclature is amended every 1 January, so master data should be checked against the current tariff annually.
Classifying more than one product?
This page shows one code. Zolltarif-Finder classifies entire product lists from Excel, CSV, or your ERP, with reasoning under GRI 1 to 6, official sources, compliance screening, and audit-ready reports.